Fault Indication Board HiATB01-FAULT-01
- 1-channel
- 24 V DC supply
- Monitors up to 16 HiC Termination Boards
- Relay contact output
- LEDs for supply and fault status
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Download the complete datasheet as a PDF:
Datasheet excerpt: Technical data of HiATB01-FAULT-01
| Product Description |
|---|
| Fault Indication Board |
| Supply | ||
|---|---|---|
| Connection | SL1: terminals 3, 5(+); 4, 6(-) | |
| Rated voltage | 19.6 ... 30 V DC | |
| Ripple | ≤ 10 % | |
| Power dissipation | ≤ 500 mW | |
| Reverse polarity protection | yes | |
| Redundancy | ||
| Supply | Redundancy available. The supply is decoupled and monitored. | |
| Fault indication output | ||
| Connection | fault bus (Fault) : SL1: terminals 1, 2 fault output : SL2: terminals 1, 2 |
|
| Output type | volt-free contact | |
| Switch behaviour | no fault: relay contact closed power supply fault: relay contact open module fault: relay contact open |
|
| Contact loading | 30 V DC , 1 A | |
| Indicators/settings | ||
| Display elements | LED Power (power supply), green LED LED Supply I (missing supply I), red LED LED Supply II (missing supply II), red LED LED Fault (fault signal), red LED - LED flashes: module fault/power supply fault at the termination board |
|
| Directive conformity | ||
| Electromagnetic compatibility | ||
| Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) | |
| Conformity | ||
| Electromagnetic compatibility | NE 21:2017 For further information see system description. |
|
| Degree of protection | IEC 60529:2001 | |
| Ambient conditions | ||
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) | |
| Storage temperature | -40 ... 70 °C (-40 ... 158 °F) | |
| Mechanical specifications | ||
| Degree of protection | IP20 | |
| Connection | ||
| Supply | pluggable screw terminals , black | |
| Fault output | pluggable screw terminals , black | |
| Core cross section | screw terminals: 0.2 ... 2.5 mm2 (24 ... 12 AWG) | |
| Material | housing: polycarbonate, 10 % glass fiber reinforced | |
| Mass | approx. 165 g | |
| Dimensions | 50 x 200 x 63 mm (1.97 x 7.9 x 2.48 inch) (W x H x D) | |
| Height | 200 mm | |
| Width | 50 mm | |
| Depth | 63 mm | |
| Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 | |
| General information | ||
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27210101 |
| ECLASS 12.0 | 27210101 |
| ECLASS 11.0 | 27210101 |
| ECLASS 10.0.1 | 27210101 |
| ECLASS 9.0 | 27210101 |
| ECLASS 8.0 | 27210101 |
| ECLASS 5.1 | 27210121 |
| ETIM 9.0 | EC001485 |
| ETIM 8.0 | EC001485 |
| ETIM 7.0 | EC001485 |
| ETIM 6.0 | EC001485 |
| ETIM 5.0 | EC001485 |
| UNSPSC 12.1 | 39121543 |
Details: HiATB01-FAULT-01
Function
This Fault Indication Board is designed to monitor up to 16 H-System Termination Boards.
The fault bus signal can be wired in a ring (daisy chain) or redundant in a star.
Information about a missing supply voltage is available for the system as a volt-free contact.
The relay contact also signals a missing supply voltage at one of the monitored termination boards.
Wiring faults from the field side will be reported via the same relay contact, if this function supported by the the isolators.
The termination board is supplied with a robust plastic housing. This design permits the fast and reliable installation on 35 mm DIN mounting rail according to EN 60715 in the switch cabinet.
Product Documentation: HiATB01-FAULT-01
| Manuals | Language | File Type | File Size |
|---|---|---|---|
| System Manual | ENG | 5438 KB |
Design / Simulation: HiATB01-FAULT-01
| CAE | Language | File Type | File Size |
|---|---|---|---|
| EPLAN macros H-System devices (EMA) / EPLAN-Makros Geräte H-System (EMA) | ALL | ZIP | 3536 KB |
Approvals: HiATB01-FAULT-01
| Declaration of Conformity | Cert No. | Language | File Type | File Size |
|---|---|---|---|---|
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-0674C | ALL | 71 KB |
Associated Products: HiATB01-FAULT-01
| Accessory of | ||||||
|---|---|---|---|---|---|---|
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
Pepperl+Fuchs Asia Pte. Ltd.
P+F Building
18 Ayer Rajah Crescent
Singapore 139942
Singapore
sales@sg.pepperl-fuchs.com
+65 6779 9091
© 2024 All Rights Reserved.
Pepperl+Fuchs is a leading developer and manufacturer of electronic sensors and components for the global automation market. Continuous innovation, enduring quality, and steady growth have been the foundation of our success for more than 70 years. Pepperl+Fuchs employs 6,300 people worldwide and has manufacturing facilities in Germany, USA, Singapore, Hungary, Indonesia and Vietnam, most of them ISO 9001 certified.