Wireless Access Point (Ex nR) GR.RER*
- Glass-fiber reinforced polyester (GRP) enclosure
- Installation in Zone 2
- Installation in Zone 21 and Zone 22 (on request)
- Use of industrial Wireless Access Points in hazardous areas
- Separate connection enclosure allows for easy installation and maintenance
- Lightweight solution
- Customizable configuration of WI-FI and network devices and cable entries as per specification
- Image and drawing are generic for this device type and may deviate from the specific variant
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Download the complete datasheet as a PDF:
Datasheet excerpt: Technical data of GR.RER*
| Product Description |
|---|
| Wireless Access Point (Ex nR) in glass-fiber reinforced polyester (GRP) enclosure for use in explosion-hazardous areas Zones 2, 21, 22 |
| Electrical specifications | ||
|---|---|---|
| Operating voltage | 690 V AC / DC max. , depending on size for ATEX / IECEx | |
| Operating current | 350 A max. , depending on size and certification | |
| Mechanical specifications | ||
| Enclosure cover | fully detachable , optional hinges | |
| Cover fixing | stainless steel combination Phillips and slotted screw | |
| Cover seal | foamed silicone | |
| Degree of protection | IP66 | |
| Cable entry | ||
| Number of cable entries | 2 x M20 for standard variants As per specification for engineered solutions |
|
| Material | ||
| Enclosure | carbon loaded, antistatic glass-fiber reinforced polyester (GRP) | |
| Finish | inherent color black | |
| Grounding plate | 2 mm brass optional | |
| Mass | depending on integrated components and selected enclosure size | |
| Shock resistance | IK09 (from GR.18.18.10 and larger, IK09, IK10 apply) | |
| Dimensions | depending on integrated components see datasheets of relevant enclosures values might differ slightly due to casting and manufacturing tolerances |
|
| Mounting | wall mounting | |
| Grounding | none as standard optional M6 or M8 internal/external brass nickel-plated grounding bolt optional M6 or M8 internal/external stainless steel grounding bolt |
|
| Ambient conditions | ||
| Ambient temperature | depending on integrated components | |
| Data for application in connection with hazardous areas | ||
| EU-type examination certificate | FIDI 23 ATEX 0082X | |
| Marking |  II 3G Ex nR IIC T6...T4 GcEx II 3G Ex db nR [ia] IIC T6...T4 Gc Ex II 3G Ex nR [op is] IIC T6...T4 Gc |
|
| International approvals | ||
| IECEx approval | IECEx FIDI 23.0011X | |
| Further approvals | available on request | |
| Conformity | ||
| Degree of protection | EN60529 | |
| CE marking | 0102 | |
| General information | ||
| Ordering information | This Wireless Access Point solution will be delivered completely configured and assembled ready for use. For configuration details please contact customer service. | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| General specifications | ||
| Installed components | All major WI-FI Access Point vendors such as Aruba, Cisco, ect. | |
| Accessories | ||
| Optional accessories | M6 or M8 internal/external brass nickel-plated grounding bolts M6 or M8 internal/external stainless steel grounding bolts grounding plate, brass engraved traffolyte tag label engraved AISI 316L stainless steel tag label color in-fill stainless steel tag label |
|
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27180502 |
| ECLASS 12.0 | 27180502 |
| ECLASS 11.0 | 27180502 |
| ECLASS 10.0.1 | 27180502 |
| ECLASS 9.0 | 27180502 |
| ECLASS 8.0 | 27180508 |
| ECLASS 5.1 | 27180502 |
| ETIM 9.0 | EC002503 |
| ETIM 8.0 | EC002503 |
| ETIM 7.0 | EC002503 |
| ETIM 6.0 | EC002503 |
| ETIM 5.0 | EC002503 |
| UNSPSC 12.1 | 39121314 |
Details: GR.RER*
Function
This Wireless Access Point solution, based on our GR enclosure series, is specifically designed for installation in hazardous areas including Zone 2, Zone 21, and Zone 22. The system allows the use of industrial Wireless Access Points in hazardous areas, ensuring seamless connectivity while maintaining safety standards. With its separate installation connection enclosure, customers can easily install and maintain the system on their plants. This eliminates the need to access the Ex nR enclosure. Pepperl+Fuchs solution engineering teams offer any custom configurations including WI-FI devices and cable entries to meet various requirements. The GRP enclosure emits radio signals without the need for external antennas.
Approvals: GR.RER*
| Certificates | Cert No. | Language | File Type | File Size |
|---|---|---|---|---|
| Europe Fiditas ATEX | FIFI 23 ATEX 0082X | ALL | 4629 KB | |
| Worldwide Fiditas IECEx Certificate of Conformity | IECEx FIDI 23.0011X | ALL | LINK | --- |
Pepperl+Fuchs Asia Pte. Ltd.
P+F Building
18 Ayer Rajah Crescent
Singapore 139942
Singapore
sales@sg.pepperl-fuchs.com
+65 6779 9091
Pepperl+Fuchs is a leading developer and manufacturer of electronic sensors and components for the global automation market. Continuous innovation, enduring quality, and steady growth have been the foundation of our success for more than 70 years. Pepperl+Fuchs employs 6,300 people worldwide and has manufacturing facilities in Germany, USA, Singapore, Hungary, Indonesia and Vietnam, most of them ISO 9001 certified.