Fiber optic sensor SU19/110/115/123

Classic line with display
AGC (Automatic Gain Control) for faster teach-in
Gang mounting for easy wiring
Transparency recognition
30 µs High Speed Mode
Master module

Technical Data
Details
Product Documentation
Design / Simulation
Approvals
Associated Products
Ask an Expert

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Download the complete datasheet as a PDF:

Datasheet excerpt: Technical data of SU19/110/115/123

Product Description
Classic Series fiber optic sensor with display, master module, push-pull output, external Teach-In, fixed cable

General specifications
Sensor range		up to 150 mm (KLR-C02-2,2-2,0-K146)
Detection range		up to 450 mm (KLE-C01-2,2-2,0-K116)
Light source		LED
Light type		modulated visible red light , 660 nm
Ambient light limit		10000 Lux
Gang mounting		maximum 20 units
Functional safety related parameters
MTTF_d		500 a
Mission Time (T_M)		20 a
Diagnostic Coverage (DC)		0 %
Indicators/operating means
Operation indicator		Power on: static illumination , Undervoltage indicator: Green LED, pulsing (approx. 0.8 Hz) , short-circuit : LED green flashing (approx. 4 Hz)
Diagnostics indicator		7-segment display
Function indicator		LED yellow: static illumination switching state, flashes when falling short of the operating reserve
Control elements		Button (Mode) for menu choice ; Button (Set) for Teach-In ; Button (Up/Down) for fine adjusting and parameterization
Electrical specifications
Operating voltage		10 ... 30 V DC
Ripple		10 %
No-load supply current		≤ 30 mA
Input
Function input		external Teach-In
Output
Switching type		light/dark on selectable programmable
Signal output		1 push-pull (4 in 1) output NPN/PNP , short-circuit protected
Switching voltage		max. 30 V DC
Switching current		max. 100 mA , resistive load
Voltage drop		≤ 2 V DC at 100 mA ; ≤ 0.7 V at 10 mA
Switching frequency		High speed mode: 16 kHz , Standard mode: 3 kHz , High resolution: 250 Hz ~ 3 kHz (selection by the sensor), Automatic: 250 Hz , Glass mode: 250 Hz
Response time		High speed mode: 30 µs , Standard mode: 160 µs , High resolution: 2 ms , Automatic: 160 µs ~ 2 ms (choice by the sensor), Glass mode: 2 ms
Repeat accuracy		≤ 0.5 % of adjusted sensor range
Timer function		ON-delay, OFF-delay, one shot, pulse extension ; adjustable 0 ... 999 ms in 1 ms increments
Conformity
Product standard		EN 60947-5-2
Approvals and certificates
EAC conformity		TR CU 020/2011
UL approval		cULus Listed, Class 2 Power Source, Type 1 enclosure
CCC approval		CCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature		-10 ... 55 °C (14 ... 131 °F)
Storage temperature		-20 ... 70 °C (-4 ... 158 °F)
Mechanical specifications
Degree of protection		IP50
Connection		2 m PVC cable, 4 x 0,14 mm²
Material
	Housing	PC
Mass		45 g
Dimensions
	Height	34.5 mm
	Width	9 mm
	Depth	62.3 mm

Classifications

System	Classcode
ECLASS 13.0	27270905
ECLASS 12.0	27270905
ECLASS 11.0	27270905
ECLASS 10.0.1	27270905
ECLASS 9.0	27270905
ECLASS 8.0	27270905
ECLASS 5.1	27270905
ETIM 9.0	EC002651
ETIM 8.0	EC002651
ETIM 7.0	EC002651
ETIM 6.0	EC002651
ETIM 5.0	EC002651
UNSPSC 12.1	39121528

Details: SU19/110/115/123

Function

The fiber optics amplifier SU19 with display was developed to set a benchmark with the most comfortable and user-friendly interface. This simplicity of the settings decreases the costs of ownership significantly.

The whole Teach-In process of objects is time-saving due to an easy Teach-In algorithm. The high resolution 4-digit percentage display indicates current values and thresholds with highest accuracy. Wire-saving and the replacement of devices is designed user-friendly and time-saving due to gang mounting on the rear.

Product Documentation: SU19/110/115/123

Brief Instructions	Language	File Type	File Size
Instruction leaflet / Beipackzettel	ALL	PDF	588 KB

Design / Simulation: SU19/110/115/123

CAD	Language	File Type	File Size
CAD 3-D / CAD 3-D	ALL	STP	4646 KB
CAD Portal / CAD Portal	ALL	LINK	---

Approvals: SU19/110/115/123

Certificates	Cert No.	Language	File Type	File Size
Canada USA UL Ordinary Location	E87056	ALL	LINK	---
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)	DOC-0609C	ALL	PDF	302 KB
UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F)	DOC-5343	ALL	PDF	296 KB

Associated Products: SU19/110/115/123

Accessories

	KLR-C02-2,2-2,0-K70 Plastic fiber optic
	Plastic fiber optic - diffuse, Sensor range: SU18: 80 mm SU18/35: 280 mm SU19: 80 mm, Fiber optic length: 2000 mm , adjustable, End piece: thread, Series: Plastic fiber optic - diffuse, Sheathing: PVC, Device series: SU18 ; SU18/35 ; SU19fa

	KLE-C01-2,2-2,0-K102 Plastic fiber optic
	Plastic fiber optic - thru-beam, Detection range: SU18: 220 mm SU18/35: 920 mm SU19: 220 mm, Fiber optic length: 2000 mm , adjustable, End piece: thread, Series: Plastic fiber optic - thru-beam, Sheathing: PVC, Device series: SU18 ; SU18/35 ; SU19 ; ML17-LLfa

	HPF-D032 Plastic fiber optic
	fa

	KLR-C02-2,2-2,0-K146 Plastic fiber optic
	Plastic fiber optic - diffuse, Special features: High detection range, Sensor range: SU18: 150 mm SU18/35: 460 mm SU19: 150 mm, Fiber optic length: 2000 mm , adjustable, End piece: thread, Series: Plastic fiber optic - diffuse, Sheathing: PVC, Device series: SU18 ; SU18/35 ; SU19fa

	KLR-C02-1,0-2,0-K75 Plastic fiber optic
	Plastic fiber optic - diffuse, Special features: High precise, Sensor range: SU18: 4 mm SU18/35: 12 mm SU19: 4 mm, Fiber optic length: 2000 mm , adjustable, End piece: thread, Series: Plastic fiber optic - diffuse, Sheathing: PVC, Device series: SU18 ; SU18/35 ; SU19fa

	KLR-C09-1,25-2,0-K76 Plastic fiber optic
	Plastic fiber optic - diffuse, Special features: coaxial, Sensor range: SU18: 30 mm SU18/35: 100 mm SU19: 30 mm, Fiber optic length: 2000 mm , adjustable, End piece: thread, Series: Plastic fiber optic - diffuse, Sheathing: PVC, Device series: SU18 ; SU18/35 ; SU19fa

	KLR-C09-1,25-2,0-K74 Plastic fiber optic
	Plastic fiber optic - diffuse, Special features: coaxial, Sensor range: SU18: 30 mm SU18/35: 100 mm SU19: 30 mm, Fiber optic length: 2000 mm , adjustable, End piece: thread, Series: Plastic fiber optic - diffuse, Sheathing: PVC, Device series: SU18 ; SU18/35 ; SU19fa

	KLR-C16-2,2-2,0-K71 Plastic fiber optic
	Plastic fiber optic - diffuse, Special features: coaxial, Sensor range: SU18: 85 mm SU18/35: 300 mm SU19: 85 mm, Fiber optic length: 2000 mm , adjustable, End piece: thread, Series: Plastic fiber optic - diffuse, Sheathing: PVC, Device series: SU18 ; SU18/35 ; SU19fa

	KHR-C02-2,2-2,0-K131 Plastic fiber optic
	Plastic fiber optic - diffuse, Special features: high flexibility, Sensor range: SU18: 60 mm SU18/35: 210 mm SU19: 60 mm, Fiber optic length: 2000 mm , adjustable, End piece: Thread / cylindrical right angle, Series: Plastic fiber optic - diffuse, Sheathing: PVC, Device series: SU18 ; SU18/35 ; SU19fa

	KHTR-C02-2,2-2,0-K88 Plastic fiber optic
	Plastic fiber optic - diffuse, Special features: High temperature, Sensor range: SU18: 80 mm SU18/35: 280 mm SU19: 80 mm, Fiber optic length: 2000 mm , adjustable, End piece: thread, Series: Plastic fiber optic - diffuse, Sheathing: PVC, Device series: SU18 ; SU18/35 ; SU19fa

	KLE-C01-2,2-2,0-K116 Plastic fiber optic
	Plastic fiber optic - thru-beam, Special features: High detection range, Detection range: SU18: 450 mm SU18/35: 1500 mm SU19: 450 mm, Fiber optic length: 2000 mm , adjustable, End piece: thread, Series: Plastic fiber optic - thru-beam, Sheathing: PVC, Device series: SU18 ; SU18/35 ; SU19 ; ML17-LLfa

	KLE-C01-2,2-2,0-K103 Plastic fiber optic
	Plastic fiber optic - thru-beam, Detection range: SU18: 220 mm SU18/35: 920 mm SU19: 220 mm, Fiber optic length: 2000 mm , adjustable, End piece: thread, Series: Plastic fiber optic - thru-beam, Sheathing: PVC, Device series: SU18 ; SU18/35 ; SU19 ; ML17-LLfa

	KLE-C01-2,2-2,0-K101 Plastic fiber optic
	Plastic fiber optic - thru-beam, Detection range: SU18: 220 mm SU18/35: 920 mm SU19: 220 mm, Fiber optic length: 2000 mm , adjustable, End piece: Cylindrical, Series: Plastic fiber optic - thru-beam, Sheathing: PVC, Device series: SU18 ; SU18/35 ; SU19 ; ML17-LLfa

	KLE-C01-2,2-2,0-K113 Plastic fiber optic
	Plastic fiber optic - thru-beam, Detection range: SU18: 200 mm SU18/35: 800 mm SU19: 200 mm, Fiber optic length: 2000 mm , adjustable, End piece: Cylindrical, Series: Plastic fiber optic - thru-beam, Sheathing: PVC, Device series: SU18 ; SU18/35 ; SU19 ; ML17-LLfa

	KLE-C01-1,0-2,0-K120 Plastic fiber optic
	Plastic fiber optic - thru-beam, Special features: High precise, Detection range: SU18: 20 mm SU18/35: 80 mm SU19: 20 mm , Fiber optic length: 2000 mm , adjustable, End piece: thread, Series: Plastic fiber optic - thru-beam, Sheathing: PVC, Device series: SU18 ; SU18/35 ; SU19 ; ML17-LLfa

	KHE-C01-2,2-2,0-K122 Plastic fiber optic
	Plastic fiber optic - thru-beam, Special features: high flexibility, Detection range: SU18: 200 mm SU18/35: 800 mm SU19: 200 mm, Fiber optic length: 2000 mm , adjustable, End piece: thread, Series: Plastic fiber optic - thru-beam, Sheathing: PVC, Device series: SU18 ; SU18/35 ; SU19fa

	KHTE-C01-2,2-2,0-K118 Plastic fiber optic
	Plastic fiber optic - thru-beam, Special features: High temperature, Detection range: SU18: 115 mm SU18/35: 800 mm SU19: 115 mm, Fiber optic length: 2000 mm , adjustable, End piece: Side view / Periscope, Series: Plastic fiber optic - thru-beam, Sheathing: PVC, Device series: SU18 ; SU18/35 ; SU19fa

	LHE 00-1,1-1,0-20M4 Glass fiber optic
	Glass fiber optic - thru-beam with silicon covering, Special features: high flexibility, Detection range: SU18: 195 mm SU18/35: 710 mm SU19: 195 mm, End piece: thread, Series: Glass fiber optic - thru-beam, Sheathing: silicone, Device series: SU18 ; SU18/35 ; SU19fa

General Notes Relating to Pepperl+Fuchs Product Information

Pepperl+Fuchs Asia Pte. Ltd.
P+F Building
18 Ayer Rajah Crescent
Singapore 139942
Singapore
sales@sg.pepperl-fuchs.com
phone +65 6779 9091

Pepperl+Fuchs is a leading developer and manufacturer of electronic sensors and components for the global automation market. Continuous innovation, enduring quality, and steady growth have been the foundation of our success for more than 70 years. Pepperl+Fuchs employs 6,300 people worldwide and has manufacturing facilities in Germany, USA, Singapore, Hungary, Indonesia and Vietnam, most of them ISO 9001 certified.