Switch Disconnectors Ex e DIS.*
- Installation in Zone 1, Zone 2, Zone 21 and Zone 22
- Ex db eb and Ex tb certified
- Various contact configurations and pole numbers
- Glass reinforced polyester (GRP) or stainless steel enclosures
- Padlockable switch
- Labeling '0 - I'
- Function-adequate cable gland configurations
- Degree of protection: IP 66
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Download the complete datasheet as a PDF:
Datasheet excerpt: Technical data of DIS.*
| Electrical specifications | ||
|---|---|---|
| Operating voltage | 690 V max. | |
| Rated impulse withstand voltage | 6 kV | |
| Rated frequency | 50/60 Hz | |
| Short circuit current limitation | recommended: 25 A : 35 A, gG 40 A : 63 A, gG |
|
| Operating current | 25 A max. or 40 A max. | |
| Terminal capacity | see data table | |
| Rated insulation voltage | 800 V | |
| Function | switch disconnector | |
| Color | black and red-yellow | |
| Contact configuration | see data table | |
| Switching configuration | 2 position changeover with left OFF | |
| Usage category | see data table | |
| Number of poles | see data table | |
| Auxiliary contacts | see data table | |
| Auxiliary contacts usage category | see data table | |
| Operator action | engage - engage | |
| Lockable | in 'OFF' position threefold padlockable | |
| Labeling | 0 - I | |
| Mechanical specifications | ||
| Enclosure range | see table | |
| Enclosure cover | fully detachable | |
| Cover fixing | stainless steel A4 (V4A) hexagonal head screws or stainless steel combination Phillips and slotted screw | |
| Screws | M6 | |
| Number | 4 | |
| Tightening torque | 3.5 Nm | |
| Cover seal | foamed silicone | |
| Safety | cover detachable only when operator in 'ON' position with SAF.* variants | |
| Degree of protection | IP66 | |
| Cable entry | see data table | |
| Defined entry area | face B | |
| Material | ||
| Enclosure | carbon loaded, antistatic glass-fiber reinforced polyester (GRP) or AISI 316L, (1.4404) stainless steel | |
| Finish | inherent color black or brushed | |
| Mass | see data table | |
| Dimensions | see data table | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | see datasheets of cable glands | |
| Mounting | see data table | |
| Grounding | GRP none as standard stainless steel M6 internal/external brass nickel-plated grounding bolt |
|
| Ambient conditions | ||
| Ambient temperature | -40 ... 55 °C (-40 ... 131 °F) @ T4 | |
| Data for application in connection with hazardous areas | ||
| EU-type examination certificate | CML 16 ATEX 3009X | |
| Marking |  II 2 GD Ex db eb IIC T* Gb Ex tb IIIC T** °C Db T4/T130 °C @ Ta +55 °C |
|
| International approvals | ||
| IECEx approval | IECEx CML 16.0008X | |
| UKCA approval | CML 22 UKEX 2550X | |
| ECAS approval | 22-10-53256/E22-09-052316/NB0002 | |
| IA approval | MASC S/18-0003X | |
| CCC approval | 2020322304002545 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| Usage category | IEC / EN 60947 | |
| CE marking | 0080 or 0102, see type label | |
| General information | ||
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27144052 |
| ECLASS 12.0 | 27144052 |
| ECLASS 11.0 | 27144052 |
| ECLASS 10.0.1 | 27144052 |
| ECLASS 9.0 | 27144052 |
| ECLASS 8.0 | 27144052 |
| ECLASS 5.1 | 27370401 |
| ETIM 9.0 | EC000522 |
| ETIM 8.0 | EC000522 |
| ETIM 7.0 | EC000522 |
| ETIM 6.0 | EC000522 |
| ETIM 5.0 | EC000522 |
| UNSPSC 12.1 | 39121314 |
Details: DIS.*
Function
DIS* switch disconnectors and SAF* safety switches guarantee safe disconnection of machines from the mains power supply during cleaning, maintenance and repair. They can be utilized in hazardous areas up to zone 1 / 21. Various main and auxiliary contact configurations cover many switching requirements.
Enclosure variants are available in high-quality stainless steel and rugged GRP material.
According to IEC 62626-1 the enclosure cover of SAF* variants can only be opened when the switch is in ON position.
Product Documentation: DIS.*
| Brief Instructions | Language | File Type | File Size |
|---|---|---|---|
| Brief Instructions - Switch Disconnectors Ex e / Safety Switches Ex e - DIS* / SAF* | ENG | 754 KB |
Approvals: DIS.*
| Certificates | Cert No. | Language | File Type | File Size |
|---|---|---|---|---|
| CML IECEx Certificate of Conformity | IECEx CML 16.0008X | ALL | LINK | --- |
| China SITIIAS CCC Ex Certificate | 2020322304002545 (Pepperl+Fuchs SE,Mannheim) | ALL | 13190 KB | |
| ECASEx | 24-02-102377/E22-12-059623/NB0002 | ALL | 850 KB | |
| ECASEx | 24-11-132357/E24-11-137188/NB0002 | ALL | 994 KB | |
| ECASEx | 24-11-132356/E24-11-137186/NB0002 | ALL | 994 KB | |
| Europe CML ATEX | CML 16ATEX3009X | ALL | 298 KB | |
| UK-Type Examination Certificate | CML 22UKEX2550X | ALL | 264 KB | |
| Declaration of Conformity | ||||
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-3235B | ALL | 254 KB | |
Pepperl+Fuchs Asia Pte. Ltd.
P+F Building
18 Ayer Rajah Crescent
Singapore 139942
Singapore
sales@sg.pepperl-fuchs.com
+65 6779 9091
Pepperl+Fuchs is a leading developer and manufacturer of electronic sensors and components for the global automation market. Continuous innovation, enduring quality, and steady growth have been the foundation of our success for more than 70 years. Pepperl+Fuchs employs 6,300 people worldwide and has manufacturing facilities in Germany, USA, Singapore, Hungary, Indonesia and Vietnam, most of them ISO 9001 certified.