Select Your Country

Go to global website

  1. country
  2. Products
  3. Industrial Sensors
  4. Photoelectric Sensors
  5. Thru-Beam Sensors
  6. E18/EV18-LAS/32/59/76a/92

E18/EV18-LAS/32/59/76a/92 Thru-beam sensor

Key Benefits at a Glance

  • Laser thru-beam sensor in the M18 housing
  • Metal design
  • Automatic threshold value adaptation
  • Very high switching accuracy
  • Light beam diameter < 1.5 mm
  • Test input

Show more

Please contact us for exact delivery estimation.
Product photo: Thru-beam sensor E18/EV18-LAS/32/59/76a/92
Dimensions: Thru-beam sensor E18/EV18-LAS/32/59/76a/92
Connection Assignment: Thru-beam sensor E18/EV18-LAS/32/59/76a/92
Product photo: Thru-beam sensor E18/EV18-LAS/32/59/76a/92
Dimensions: Thru-beam sensor E18/EV18-LAS/32/59/76a/92
Connection Assignment: Thru-beam sensor E18/EV18-LAS/32/59/76a/92
Warning
Product Compliance: Europe – CE
Product Compliance: United Kingdom – UKCA
Note

All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

EN
  • DE
  • EN
  • ES
  • FR
DatasheetClassificationProduct DocumentationApprovalsRelated Products

Technical data of E18/EV18-LAS/32/59/76a/92

Laser thru-beam sensor, M18 threaded housing design, metal housing, front optical face, 10 m detection range, red light, dark on, DC version, PNP output, test input, M12 plug
EmitterE18-LAS/92
ReceiverEV18-LAS/32/59/92
Effective detection range0 ... 10 m
Threshold detection range18 m
Light sourcelaser diode
Light typemodulated visible red light
Laser nominal ratings
NoteLASER LIGHT , DO NOT STARE INTO BEAM
Laser class1
Wave length650 nm
Beam divergence1 mrad
Pulse length15 µs
Repetition rate10 kHz
max. pulse energy< 10.2 nJ
Target size1.2 mm
Light receiverphoto diode
Diameter of the light spotapprox. 2 mm at detection range 1.5 m
Opening angleReceiver +/-2°
Optical facefrontal
Ambient light limit
Continuous light5000 Lux
HysteresisH25 %
MTTFd208.3 a
Mission Time (TM)7 a
Diagnostic Coverage (DC)60 %
Function indicatorLED yellow, lights up when light beam is free, flashes when falling short of the operating reserve
Operating voltageUB10 ... 30 V DC
Ripple10 %
No-load supply currentI0emitter ≤ 25 mA , receiver ≤ 60 mA
Test inputEmitter deactivation
emitter on: 0 ... +3V
emitter off: +5V ... +UB
Stability alarm outputPNP, open collector , short-circuit protected
inactive: signal strength > approx. 30 % of the strength with clean optic
active: signal strength < approx. 30 % of the strength with clean optic
Switching typedark-on
Signal output1 PNP, short-circuit protected, open collector
Switching voltagemax. 30 V DC
Switching currentmax. 100 mA
Switching frequencyf1000 Hz
Response time0.5 ms
Product standardEN 60947-5-2
Laser safetyIEC 60825-1:2007
Standard conformity
Shock and impact resistanceIEC / EN 60068, half-sine, 30 g in X, Y and Z direction
Vibration resistanceIEC / EN 60068-2-6. Sinus. 10 -150 Hz, 5 g in each X, Y and Z directions
CCC approvalCCC approval / marking not required for products rated ≤36 V
Ambient temperature0 ... 50 °C (32 ... 122 °F)
Storage temperature-40 ... 85 °C (-40 ... 185 °F)
Degree of protectionIP65
Connection4-pin, M12 x 1 connector
Material
Housingbrass, nickel-plated
Optical faceglass
Connectormetal
Massper 45 g
Dimensions
Length80 mm
Diameter18 mm
General Notes
Ask an expert

We value your privacy!

We and our partners are using technologies like cookies and process personal data like the IP-address or browser information in order to personalize the advertising that you see. This helps us to show you more relevant ads and improves your internet experience. We also use it in order to measure results or align our website content. Because we value your privacy, we are herewith asking for your permission to use these technologies. You can always change/withdraw your consent later by clicking on the settings button on the left lower corner of the page.

Privacy Policy