Reliable Limit Monitoring with SC-System's New Trip Amplifier

The SC-System trip amplifier monitors measurement signals based on a previously determined limit value. If the actual value deviates from the limit value, the module sends a signal that activates an emergency trip or an alarm, as an example. Due to the module’s parameterizable outputs, switch signals are available at the relay contact outputs without the user having to refer to a central control panel.

In addition to its parameterizing options, the SC-System’s trip amplifier enables analysis of diverse input variables.  The module processes incoming standard signals from 2-wire-transmitters, unipolar and bipolar signals from 2-wire-transmitters,  as well as unipolar and bipolar current and voltage sources. The module can be adapted precisely to a specific application, providing users with utmost flexibility. Additionally, a supply of 2-wire-transmitters is available.

The SC-System trip amplifier offers a restart inhibit that indicates errors until they are identified, corrected, and acknowledged. This protective function is useful for monitoring lead breakage: If the two ends of a broken line happen to still be in contact, it can appear as though there is no error. If this error remains unidentified, it can affect processes and endanger personnel and equipment. A variety of configuration options is available to help users adapt the signal conditioner to different applications: adjustable on/off delay and a one-shot function for the relay contact output.

The SC-System's 1- and 2-channel signal conditioners are especially designed for use in non-hazardous areas. With a width of 6 mm and a height of 97 mm, the compact modules are ideally suited for retrofitting in tight spaces. The SC-System offers high-quality three-way isolation between input, output, and supply, withstanding a working voltage of up to 300 V and a test voltage of up to 3.0 KV. The signal conditioners are designed for an operating temperature from -25 °C to +70 °C, and can be mounted horizontally or vertically without distance and reducing operating values. The SC-System modules are supplied with 24 volts via terminals or power bus, an insert for 35-mm DIN rails.

• Reliable limit monitoring (min and max)
• Parameterizable switching outputs
• Various input quantities can be evaluated
• Integrated restart inhibit
• Compact housing design
• High-quality three-way isolation
• Convenient installation, power supply and error reporting via power bus
• Operating temperature from -25 °C to +70 °C