Active infrared scanner AIR30/32-UP-2493
- Single-beam light scanner
- Can be used to monitor both main and ancillary closing edges
- Closing edge safety on revolving doors and carousel doors
- Accurate beam alignment thanks to finely bundled light beam
- Flush-mounted version with front cover, black
- DC voltage version
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Download the complete datasheet as a PDF:
Datasheet excerpt: Technical data of AIR30/32-UP-2493
| Product Description |
|---|
| Single-beam light scanners with finely bundled light beam for monitoring main and ancillary closing edges |
| General specifications | ||
|---|---|---|
| Detection range min. | 0 ... 885 mm preset | |
| Reference target | material with reflection factor> 6% | |
| Light source | IRED | |
| Light type | modulated infrared light | |
| Transmitter frequency | 1800 Hz | |
| Operating mode | Background evaluation | |
| Diameter of the light spot | 22 x 22 mm at sensor range 885 mm | |
| Opening angle | approx. 1.4 ° | |
| Accessories provided | Swivel bracket, Mounting bracket | |
| Functional safety related parameters | ||
| MTTFd | 1050 a | |
| Mission Time (TM) | 20 a | |
| Diagnostic Coverage (DC) | 90 % | |
| Electrical specifications | ||
| Operating voltage | 24 V DC | |
| No-load supply current | 100 mA | |
| Input | ||
| Test input | emitter deactivation at +UB | |
| Output | ||
| Switching type | light-on (output is active, when background exists and no person in the detection field) | |
| Signal output | 1 PNP output, short-circuit protected, reverse polarity protected, open collector | |
| Switching voltage | max: 31.2 V DC | |
| Switching current | ≤ 0.2 A | |
| Response time | 50 ms | |
| Standard conformity | ||
| Standards | EN 60947-5-2 | |
| Standards 2 | EN 61000-6-2 without EN 61000-4-5, EN 61000-4-11 | |
| Standards 3 | EN 61000-6-3 | |
| Approvals and certificates | ||
| CCC approval | CCC approval / marking not required for products rated ≤36 V | |
| Ambient conditions | ||
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) | |
| Storage temperature | -30 ... 70 °C (-22 ... 158 °F) | |
| Mechanical specifications | ||
| Degree of protection | IP52 | |
| Connection | Connecting cable 500 mm with socket connector (Deutsch), 4-pin | |
| Material | ||
| Housing | plastic | |
| Optical face | Luran® | |
| Mass | 50 g | |
| Dimensions | ||
| Height | 45 mm | |
| Width | 102 mm | |
| Depth | 32 mm | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27270913 |
| ECLASS 12.0 | 27270913 |
| ECLASS 11.0 | 27270913 |
| ECLASS 10.0.1 | 27270913 |
| ECLASS 9.0 | 27270913 |
| ECLASS 8.0 | 27270913 |
| ECLASS 5.1 | 27270903 |
| ETIM 9.0 | EC002550 |
| ETIM 8.0 | EC002550 |
| ETIM 7.0 | EC002550 |
| ETIM 6.0 | EC002550 |
| ETIM 5.0 | EC001821 |
| UNSPSC 12.1 | 39121528 |
Details: AIR30/32-UP-2493
Function
The sensor is used as an opening impulse sensor for train doors. The fact that it is fitted to the side means that the detection beam crosses the entrance area. The detection range is optimized for doors that are 935 mm to 955 mm wide. The detection range is preset and cannot be modified. This creates a background area above 885 mm in which no detection takes place.
Caution!
The sensor must point towards a background or a wall, otherwise it will not work.
Informative Literature: AIR30/32-UP-2493
| We are sorry, there are no documents for your language selection. Please select another language. |
Product Documentation: AIR30/32-UP-2493
| Brief Instructions | Language | File Type | File Size |
|---|---|---|---|
| Instruction leaflet / Beipackzettel | ALL | 416 KB |
Design / Simulation: AIR30/32-UP-2493
| CAD | Language | File Type | File Size |
|---|---|---|---|
| CAD 3-D additional / CAD 3-D additional | ALL | STP | 140 KB |
| CAD Portal / CAD Portal | ALL | LINK | --- |
Approvals: AIR30/32-UP-2493
| Declaration of Conformity | Certificate No. | Language | File Type | File Size |
|---|---|---|---|---|
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-2247B | ALL | 227 KB | |
| UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F) | DOC-6941 | ALL | 224 KB |
Associated Products: AIR30/32-UP-2493
| Accessories | ||||||
|---|---|---|---|---|---|---|
|
||||||
|
||||||
|
||||||
Pepperl+Fuchs (Pty) Ltd
8 Glen Eagle Office Park
Koorsboom Ave, Glen Marais, Kempton Park
1619 Johannesburg
South Africa
info@za.pepperl-fuchs.com
+27 87985 0797
Pepperl+Fuchs is a leading developer and manufacturer of electronic sensors and components for the global automation market. Continuous innovation, enduring quality, and steady growth have been the foundation of our success for more than 70 years. Pepperl+Fuchs employs 6,300 people worldwide and has manufacturing facilities in Germany, USA, Singapore, Hungary, Indonesia and Vietnam, most of them ISO 9001 certified.