Serviceline Industrial Sensors
Serviceline Explosion Protection
Industrial Sensors
Not available for purchase
Not available for purchase

Elevator light grid AL2109-P-1820-3449/25/32/143

AL2109-P-1820-3449/25/32/143
  • Low-profile, high resolution light grid for monitoring locking edges on elevators and accesses
  • Dense monitoring field with up to 135 beams ensures that small objects are detected
  • Object detection up to distance of zero
  • Automatic beam crossing and beam suppression
  • Insensitive to reflection and ambient light
  • In accord with EN81-70 and EN12015/16

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Download the complete datasheet as a PDF:


Datasheet excerpt: Technical data of  AL2109-P-1820-3449/25/32/143

Product Description
High-resolution light grid for detecting people and objects, set comprising emitter and receiver, field height: 1800 mm, light on, PNP output, M8 plug
General specifications
Effective detection range0 ... 3500 mm
Threshold detection range3500 mm
Light sourceIRED
Light typemodulated infrared light , 950 nm
Field height1800 mm
Beam crossoverautomatic, 3x/5x/7x (depending on distance between transmitter/receiver)
Beam blankingDefective beams are faded out after 60 s. Deactivation of the light grid upon failure of 2 adjacent beams or more than 50 % of all beams
Beam spacing90 mm
Number of beams61 ... 135 (dynamic)
Opening angleEmitter: < 20 ° , Receiver: < 6 °
Ambient light limit> 100000 Lux
Accessories provided2 connecting cable , length 5 m (15 ft)
Functional safety related parameters
MTTFd180 a
Mission Time (TM)20 a
Diagnostic Coverage (DC)0 %
Indicators/operating means
Function indicatorLED red (in receiver): Illuminates after connecting operating power, out when object is detected, flashes in case of permanent interruption of 2 neighbouring beams
Electrical specifications
Operating voltage11 ... 30 V DC
Ripple10 %
No-load supply current< 180 mA
Output
Switching typelight-on
Signal outputPNP short-circuit protected
Switching voltagemax. 30 V DC
Switching current100 mA
Switching frequency< 3 Hz
Response time< 100 ms
Compliance with standards and directives
Directive conformity
EMC Directive 2004/108/ECEN 12015:2014 EN 12016:2013
Standard conformity
Product standardEN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2 Edition 3.1:2012-09
StandardsEN 81-70:2003-05 EN 81-70/A1:2004-12 EN 81-1+A3:2009-12; Chapter 7.5.2.1.1.3 Taking into account object detection in accordance with the datasheet specification for the monitoring field.
Approvals and certificates
CE conformityyes
CCC approvalCCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature-20 ... 60 °C (-4 ... 140 °F)
Storage temperature-20 ... 65 °C (-4 ... 149 °F)
Mechanical specifications
Profile width9 mm
Degree of protectionIP54
ConnectionM8 x 1 connector, 4-pin
Material
HousingAluminum
Optical faceplastic
Mass2000 g (device)
Dimensions
Width9 mm
Depth34 mm
Length2000 mm

Classifications

SystemClasscode
ECLASS 13.027270910
ECLASS 12.027270910
ECLASS 11.027270910
ECLASS 10.0.127270910
ECLASS 9.027270910
ECLASS 8.027270910
ECLASS 5.127270910
ETIM 9.0EC002549
ETIM 8.0EC002549
ETIM 7.0EC002549
ETIM 6.0EC002549
ETIM 5.0EC002549
UNSPSC 12.139121528

Details: AL2109-P-1820-3449/25/32/143

Function

The AL2109 elevator light grid is used to protect elevator doors or for passenger monitoring and access control. Its special features include its dynamic beam crossover with up to 135 active sensors, object detection down to nearly zero millimeters and an ambient light limit greater than 100,000 Lux. The evaluation electronics and the power supply are completely integrated into the emitter and receiver element, so that no external equipment is necessary for operation. The system offers flexible mounting options and meets the newest standards in accordance with EN 81-70 and EN 12016.

Informative Literature: AL2109-P-1820-3449/25/32/143

Language Selection:
LiteratureLanguageFile TypeFile Size
Brochure - Automation Light Grids: LGS and LGM SeriesENGPDF1965 KB

Product Documentation: AL2109-P-1820-3449/25/32/143

Language Selection:
Brief InstructionsLanguageFile TypeFile Size
Instruction leaflet / BeipackzettelALLPDF314 KB

Design / Simulation: AL2109-P-1820-3449/25/32/143

Language Selection:
CADLanguageFile TypeFile Size
CAD 3-D / CAD 3-DALLSTP52 KB
CAD Portal / CAD PortalALLLINK---

Approvals: AL2109-P-1820-3449/25/32/143

Language Selection:
CertificatesCertificate No.LanguageFile TypeFile Size
Canada, USA General PurposeUL-US-2133488-0 / UL-CA-2133488-0ALLPDF545 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)DOC-1903CALLPDF226 KB

Associated Products: AL2109-P-1820-3449/25/32/143

Accessories
Mounting set for backboard mounting of the elevator light curtains AL2109, Variety of possible uses in the areas of doors and elevators, Simple and fast mountingfa
Mounting set for mechanical extension of the elevator light curtains AL2109, Variety of possible uses in the areas of doors and elevators, Simple and fast mounting, Material: Aluminum housingfa
Mounting set for lateral mounting of the elevator light curtains AL2109, Variety of possible uses in the areas of doors and elevators, Simple and fast mountingfa
General Notes Relating to Pepperl+Fuchs Product Information

Pepperl+Fuchs (Pty) Ltd
8 Glen Eagle Office Park
Koorsboom Ave, Glen Marais, Kempton Park
1619 Johannesburg
South Africa
info@za.pepperl-fuchs.com
phone +27 87985 0797

© 2024 All Rights Reserved.

Pepperl+Fuchs is a leading developer and manufacturer of electronic sensors and components for the global automation market. Continuous innovation, enduring quality, and steady growth have been the foundation of our success for more than 70 years. Pepperl+Fuchs employs 6,300 people worldwide and has manufacturing facilities in Germany, USA, Singapore, Hungary, Indonesia and Vietnam, most of them ISO 9001 certified.