Connector box for barcode scanner CBX500-KIT-B6
- Connect up to 32 scanners to a network with ID-NetTM
- PROFIBUS interface
- Easy scanner connection by means of clamp terminals
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Download the complete datasheet as a PDF:
Datasheet excerpt: Technical data of CBX500-KIT-B6
| Product Description |
|---|
| PROFIBUS Connector box for barcode scanner |
| Indicators/operating means | ||
|---|---|---|
| Display elements | 5 LEDs (POWER, TRIGGER, IN 2, OUT 1, OUT 2) | |
| Electrical specifications | ||
| Operating voltage | 10 ... 30 V DC PELV | |
| Current consumption | max. 2.5 A | |
| Power consumption | max. 3 W | |
| Interface | ||
| Physical | RS-485 | |
| Protocol | PROFIBUS DP V0 and V1 | |
| Transfer rate | 9.6; 19.2; 93.75; 187.5; 500; 1500 kBit/s 3; 6; 12 Mbit/s self-synchronizing |
|
| Compliance with standards and directives | ||
| Directive conformity | 89/336 EWG | |
| Standard conformity | ||
| Product standard | EN 60947-5-2:2007 IEC 60947-5-2:2007 |
|
| Noise immunity | EN 61000-6-2 | |
| Degree of protection | EN 60529 | |
| Shock and impact resistance | EN 60068-2-27 | |
| Vibration resistance | EN 60068-2-6 | |
| Ambient conditions | ||
| Ambient temperature | -35 ... 50 °C (-31 ... 122 °F) Mount, connect, and configure only between 0° ... 50° | |
| Storage temperature | -20 ... 70 °C (-4 ... 158 °F) | |
| Relative humidity | 90 % , noncondensing | |
| Shock resistance | 30G ; 11 ms ; 3 impacts on each axis | |
| Vibration resistance | 1.5 mm ; 10 ... 55 Hz ; 2 hours on each axis | |
| Mechanical specifications | ||
| Degree of protection | IP40 | |
| Connection | 25-pin Sub-D socket for Barcode scanner , M16 cable gland for system connection (5x) , 9-pin Sub-D socket for PROFIBUS interface |
|
| Material | ||
| Housing | PC (Polycarbonate) | |
| Mass | 780 g | |
| Dimensions | ||
| Height | 71 mm | |
| Width | 192 mm | |
| Depth | 180 mm | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27280192 |
| ECLASS 12.0 | 27280192 |
| ECLASS 11.0 | 27280192 |
| ECLASS 10.0.1 | 27280192 |
| ECLASS 9.0 | 27280192 |
| ECLASS 8.0 | 27319290 |
| ECLASS 5.1 | 27310290 |
| ETIM 9.0 | EC003015 |
| ETIM 8.0 | EC003015 |
| ETIM 7.0 | EC003015 |
| ETIM 6.0 | EC003015 |
| ETIM 5.0 | EC003015 |
| UNSPSC 12.1 | 43211711 |
Details: CBX500-KIT-B6
Function
Devices from the CBX* series enable RS232- and RS485-compatible devices to be connected quickly and easily. A wide variety of connections also allows other field devices to be connected.
By reducing installation time and the number of system failures when a device is replaced, your operating costs will be significantly lower.
Standardized pinning of connections and simple attachment of cable ends using spring terminals ensures easy cable installation. The configuration of the connected scanner can be saved in backup modules and restored at a later date.
To facilitate installation of the device, the continuous mounting holes are easy to access and the top section of housing can be removed.
Note: Avoid mechanical stress, such as screwing the housing cover together, in deep-freeze areas.
Product Documentation: CBX500-KIT-B6
| Manuals | Language | File Type | File Size |
|---|---|---|---|
| Manual BM100 Backup module | ENG | 501 KB | |
| Manual CBX500 | ENG | 3149 KB | |
| Manual DAD Driver | ENG | 604 KB | |
| Manual Host Interface Modules | ENG | 1556 KB |
Design / Simulation: CBX500-KIT-B6
| CAD | Language | File Type | File Size |
|---|---|---|---|
| CAD 3-D / CAD 3-D | ALL | STP | 768 KB |
| CAD Portal / CAD Portal | ALL | LINK | --- |
Approvals: CBX500-KIT-B6
| Declaration of Conformity | Certificate No. | Language | File Type | File Size |
|---|---|---|---|---|
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-3633A | ALL | 213 KB | |
| UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F) | DOC-6630 | ALL | 36 KB |
Software: CBX500-KIT-B6
| Device Description Files/Drivers | Release Info | File Type | File Size |
|---|---|---|---|
| GSD file for Interface box / GSD-File für Anschaltbox | V 1.1 | ZIP | 14 KB |
| Software Tools | |||
| Genius Software / Genius Software | V. 1.16 | ZIP | 95060 KB |
Associated Products: CBX500-KIT-B6
| Accessory of | ||||||
|---|---|---|---|---|---|---|
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
From 2-D code readers and handhelds to barcode scanners and special solutions—find the ideal solution for your optical identification task.
Pepperl+Fuchs (Pty) Ltd
8 Glen Eagle Office Park
Koorsboom Ave, Glen Marais, Kempton Park
1619 Johannesburg
South Africa
info@za.pepperl-fuchs.com
+27 87985 0797
Pepperl+Fuchs is a leading developer and manufacturer of electronic sensors and components for the global automation market. Continuous innovation, enduring quality, and steady growth have been the foundation of our success for more than 70 years. Pepperl+Fuchs employs 6,300 people worldwide and has manufacturing facilities in Germany, USA, Singapore, Hungary, Indonesia and Vietnam, most of them ISO 9001 certified.