Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Download the complete datasheet as a PDF:
Datasheet excerpt: Technical data of
UB1500-F42-UK-V95
| Product Description |
| Single head system |
| General specifications |
| Sensing range | 70 ... 1500 mm |
| Adjustment range | 90 ... 1500 mm |
| Dead band | 0 ... 70 mm |
| Standard target plate | 100 mm x 100 mm |
| Transducer frequency | approx. 175 kHz |
| Response delay | approx. 150 ms |
| Indicators/operating means |
| LED green | solid green: Power on |
| LED yellow | solid: switching state switch output
flashing: program function |
| LED red | normal operation: "fault"
program function: no object detected |
| Electrical specifications |
| Fusing | ≤ 3 A Slow-blow fuse in accordance with IEC 60127-2 Sheet 5 required. Recommendation: after a short circuit, check that the device is functioning correctly. |
| Operating voltage | 22 ... 253 V AC/DC |
| No-load supply current | ≤ 60 mA |
| Time delay before availability | ≤ 800 ms |
| Output |
| Output type | 1 relay output |
| Rated operating current | 3 A |
| Repeat accuracy | ≤ 0.5 % of switching point |
| Switching frequency | ≤ 3 Hz |
| Range hysteresis | 1 % of the set operating distance |
| Temperature influence | ± 1 % of full-scale value |
| Compliance with standards and directives |
| Standard conformity | |
| Standards | EN IEC 60947-5-2:2020
IEC 60947-5-2:2019 |
| Ambient conditions |
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
| Mechanical specifications |
| Degree of protection | IP65 |
| Connection | 5-pin V95 connector (7/8"-16 UN 2A) |
| Material | |
| Housing | PBT |
| Transducer | epoxy resin/hollow glass sphere mixture; foam polyurethane, cover PBT |
| Mass | 260 g |
| Dimensions | |
| Height | 80 mm |
| Width | 80 mm |
| Length | 34 mm |
Classifications
| System | Classcode |
| ECLASS 13.0 | 27272803 |
| ECLASS 12.0 | 27272803 |
| ECLASS 11.0 | 27272803 |
| ECLASS 10.0.1 | 27272803 |
| ECLASS 9.0 | 27272803 |
| ECLASS 8.0 | 27272803 |
| ECLASS 5.1 | 27272803 |
| ETIM 9.0 | EC001849 |
| ETIM 8.0 | EC001849 |
| ETIM 7.0 | EC001849 |
| ETIM 6.0 | EC001849 |
| ETIM 5.0 | EC001849 |
| UNSPSC 12.1 | 41111960 |
Details:
UB1500-F42-UK-V95
Product Documentation:
UB1500-F42-UK-V95
Design / Simulation:
UB1500-F42-UK-V95
Approvals:
UB1500-F42-UK-V95
Associated Products:
UB1500-F42-UK-V95
| Accessories |
|
|
|
| Mounting aid for FP and F42 sensors, Suitable for series F42 and FPfa |
|
|
|
|
| Female connector, 7/8" - 16 UN, 5-pin, field attachablefa |
|
|
|
|
| Female cordset, 7/8", 5-pin, PVC cablefa |
|
|
|
|
| Female cordset, field attachablefa |
|
|
|
|
|
| Female cordset, 7/8", 5-pin, PVC cablefa |
|
|
|
|
| Mounting brackets for sensorsfa |
|
+27 87985 0797