Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Download the complete datasheet as a PDF:
General specifications | ||
---|---|---|
Pulse count | max. 2500 | |
Electrical specifications | ||
Operating voltage | 10 ... 30 V DC | |
No-load supply current | max. 80 mA | |
Output | ||
Output type | push-pull, incremental | |
Voltage drop | < 4 V | |
Load current | max. per channel 40 mA , short-circuit protected, reverse polarity protected | |
Output frequency | max. 160 kHz | |
Rise time | 250 ns | |
De-energized delay | 250 ns | |
Connection | ||
Connector | type 9414 (M16), 5-pin | |
Standard conformity | ||
Degree of protection | DIN EN 60529, IP40 | |
Emitted interference | EN 61000-6-4:2007/A1:2011 | |
Noise immunity | EN 61000-6-2:2005 | |
Approvals and certificates | ||
UL approval | cULus Listed, General Purpose, Class 2 Power Source | |
Ambient conditions | ||
Operating temperature | ||
Plastic disk | -20 ... 60 °C (-4 ... 140 °F) | |
Storage temperature | ||
Plastic disk | -40 ... 60 °C (-40 ... 140 °F) | |
Mechanical specifications | ||
Material | ||
Housing | powder coated diecast zinc | |
Flange | powder coated diecast zinc | |
Shaft | Stainless steel 1.4305 / AISI 303 | |
Mass | approx. 480 g | |
Rotational speed | max. 3000 min -1 | |
Moment of inertia | ≤ 5 gcm2 | |
Starting torque | < 0.5 Ncm | |
Shaft load | ||
Axial | 10 N | |
Radial | 10 N |
System | Classcode |
---|---|
ECLASS 13.0 | 27270501 |
ECLASS 12.0 | 27270501 |
ECLASS 11.0 | 27270501 |
ECLASS 10.0.1 | 27270501 |
ECLASS 9.0 | 27270501 |
ECLASS 8.0 | 27270501 |
ECLASS 5.1 | 27270501 |
ETIM 9.0 | EC001486 |
ETIM 8.0 | EC001486 |
ETIM 7.0 | EC001486 |
ETIM 6.0 | EC001486 |
ETIM 5.0 | EC001486 |
UNSPSC 12.1 | 39121527 |
The cuboid housing of this incremental rotary encoder is suitable for easy fastening onto mounting profiles or comparable types of construction. Four through holes and two grooves in the housing allow a wide range of installation possibilities. The diecast zinc housing gives the incremental rotary encoder the sturdiness it needs.
The pulse disk is designed in plastic up to 600 pulses. Beyond that, glass is used.
Certificates | Certificate No. | Language | File Type | File Size |
---|---|---|---|---|
Canada, USA UL General Purpose | UL-US-2233187-0 / UL-CA-2232331-0 | ALL | 493 KB | |
Canada, USA UL General Purpose | CoC E223176 RepRef E223176-20050829 | ALL | 409 KB |
Accessories | ||||||
---|---|---|---|---|---|---|
|
||||||
|
||||||
|
||||||
|
||||||
|