Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Download the complete datasheet as a PDF:
Datasheet excerpt: Technical data of
PXV100SI-F200-R4-V19
| Product Description |
| Read head for incident light positioning system |
| General specifications |
| Passage speed | ≤ 8 m/s |
| Measuring length | max. 10000 m |
| Light type | Infrared |
| Scan rate | 100 s-1 |
| Read distance | 100 mm |
| Depth of focus | + 20 mm / - 40 mm |
| Reading field | 115 mm x 73 mm |
| Ambient light limit | 100000 Lux |
| Accuracy | ± 0.2 mm |
| Nominal ratings |
| Camera | |
| Type | CMOS , Global shutter |
| Processor | |
| Clock pulse frequency | 600 MHz |
| Speed of computation | 4800 MIPS |
| Digital resolution | 32 Bit |
| Functional safety related parameters |
| MTTFd | 84 a |
| Mission Time (TM) | 10 a |
| Diagnostic Coverage (DC) | 0 % |
| Indicators/operating means |
| LED indication | 7 LEDs (communication, alignment aid, status information) |
| Electrical specifications |
| Operating voltage | 15 ... 30 V DC , PELV |
| No-load supply current | max. 200 mA |
| Power consumption | 3 W |
| Interface |
| Interface type | RS-485 - Interface |
| Data output code | binary code |
| Transfer rate | 38400 ... 230400 Bit/s |
| Termination | Switchable terminal resistor |
| Query cycle time | ≥ 10 ms |
| Interface 2 |
| Interface type | USB Service |
| Input |
| Input type | 1 to 3 functional inputs , programmable |
| Input impedance | ≥ 27 kΩ |
| Output |
| Output type | 1 to 3 switch outputs , PNP , programmable , short-circuit protected |
| Switching voltage | Operating voltage |
| Switching current | 150 mA each output |
| Conformity |
| Photobiological safety | exempt group according to EN 62471:2008 |
| Standard conformity |
| Emitted interference | EN 61000-6-4:2007+A1:2011 |
| Noise immunity | EN 61000-6-2:2005 |
| Shock resistance | EN 60068-2-27:2009 |
| Vibration resistance | EN 60068-2-6:2008 |
| Approvals and certificates |
| CE conformity | CE |
| UL approval | cULus Listed, Class 2 Power Source, Type 1 enclosure |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Ambient conditions |
| Operating temperature | 0 ... 60 °C (32 ... 140 °F) , -20 ... 60 °C (-4 ... 140 °F) (noncondensing; prevent icing on the lens!) |
| Storage temperature | -20 ... 85 °C (-4 ... 185 °F) |
| Relative humidity | 90 % , noncondensing |
| Mechanical specifications |
| Connection type | 8-pin, M12 x 1 connector |
| Degree of protection | IP67 |
| Material | |
| Housing | PC/ABS |
| Mass | approx. 160 g |
| Dimensions | |
| Height | 70 mm |
| Width | 70 mm |
| Depth | 50 mm |
| Factory settings |
| X resolution (protocol) | 1 mm |
| Y resolution (protocol) | 1 mm |
| Code tape orientation | 0 ° |
| Address | 0 |
| Baud rate | 115200 Bd |
| Bus termination | ON |
| "No Position" X value | 0 |
| "No Position" Y value | 0 |
| "No Position" speed value | 127 |
| Overspeed threshold (protocol) | 12.5 m/s |
| X value in case of error | Error number |
| Y value in case of error | Error number |
| Speed value in case of error | Error number |
| Code tape width | one-rowed |
| X positon offset | 0 mm |
| Function input/output | inactive |
Classifications
| System | Classcode |
| ECLASS 13.0 | 27270918 |
| ECLASS 12.0 | 27270918 |
| ECLASS 11.0 | 27270701 |
| ECLASS 10.0.1 | 27270701 |
| ECLASS 9.0 | 27270701 |
| ECLASS 8.0 | 27270701 |
| ECLASS 5.1 | 27270701 |
| ETIM 9.0 | EC004672 |
| ETIM 8.0 | EC002999 |
| ETIM 7.0 | EC002999 |
| ETIM 6.0 | EC002999 |
| ETIM 5.0 | EC001852 |
| UNSPSC 12.1 | 43211711 |
Details:
PXV100SI-F200-R4-V19
Product Documentation:
PXV100SI-F200-R4-V19
| Manuals | Language | File Type | File Size |
| Manual | ENG | PDF | 3199 KB
|
Design / Simulation:
PXV100SI-F200-R4-V19
Approvals:
PXV100SI-F200-R4-V19
Software:
PXV100SI-F200-R4-V19
Associated Products:
PXV100SI-F200-R4-V19
| Matching System Components |
|
|
|
| Data Matrix code tape, High chemical resistance, Low weight, Self-adhesive mounting, High temperature resistance, High mechanical stabilityfa |
|
| Accessories |
|
|
|
| Female connector M12 straight A-coded 8-pin, for cable diameter 5 - 8 mm, shielded, field-attachablefa |
|
|
|
|
| Alignment guide for readerfa |
|
|
|
|
| USB to RS 485 interface converter, Extension cable 0.8 m in scope of delivery, Power supply for 95 - 230 V AC, For RS485fa |
|
|
|
|
| Cable unit with power supply for USB / RS-485 interface converter , Power supply for 95 - 230 V ACfa |
|
|
|
|
| Female connector, M12, 8-pin, shielded, field attachablefa |
|
|
|
|
| Grounding clip for PCV system, Stainless steel version, Low weight, M12 plug connection, High mechanical stabilityfa |
|
|
|
|
| Marker head for 25 mm code tape, For 25 mm code tapes, Can be used for PCV80..., PCV100..., and PCV130... readers, Includes 2 x edding® 3000 permanent markersfa |
|
|
|
|
| Mounting bracket for PCV* read headfa |
|
|
|
|
| Operating software for camera-based sensorsfa |
|
|
|
|
| Event markers for the PXV system, High chemical resistance, Low weight, Self-adhesive mounting, High temperature resistance, High mechanical stabilityfa |
|
+27 87985 0797