Serviceline Industrial Sensors
Serviceline Explosion Protection

Inductive positioning system PMI14V-F112-U-IO-2M-V31

PMI14V-F112-U-IO-2M-V31
  • Parameterization and diagnosis via IO-Link
  • Analog output 0 ... 10 V
  • Measuring range 0 ... 14 mm

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Download the complete datasheet as a PDF:


Datasheet excerpt: Technical data of  PMI14V-F112-U-IO-2M-V31

General specifications
Switching element functionAnalog voltage output
Installationflush
Object distancemax. 2.5 mm
Measuring range0 ... 14 mm
Nominal ratings
Operating voltage18 ... 30 V DC
Reverse polarity protectionreverse polarity protected
Linearity error± 0.3 mm
Repeat accuracy± 0.05 mm
Resolution33 µm
Temperature drift± 0.5 mm
No-load supply current≤ 20 mA
Operating voltage indicatorLED green
Functional safety related parameters
MTTFd490 a
Mission Time (TM)20 a
Diagnostic Coverage (DC)0 %
Interface
Interface typeIO-Link
ModeCOM2 (38.4 kBit/s)
Value range0000h ... 7000h
Analog output
Output typevoltage output 0 ... 10 V
Load resistor≥ 2000 Ω
Short-circuit protectionlimited to 6 mA
Compliance with standards and directives
Standard conformity
StandardsEN 60947-5-2:2007
EN 60947-5-2/A1:2012
IEC 60947-5-2:2007
IEC 60947-5-2 AMD 1:2012
IEC 61131-9:2013
Approvals and certificates
UL approvalcULus Listed, Class 2 Power Source, Type 1 enclosure
CCC approvalCCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature-25 ... 70 °C (-13 ... 158 °F)
Mechanical specifications
Connection typeCable connector
Housing materialdiecast zinc, not laquered or coated
Degree of protectionIP67
Material
Targetmild steel, e. g. 1.0037, SR235JR (formerly St37-2)
Connector
ThreadingM8 x 1
Cable
Cable diameter4.8 mm
Bending radius> 10 x cable diameter
MaterialPUR
Length2 m ± 20 mm
Dimensions
Height30.5 mm
Width35 mm
Length35 mm
NoteThe data relating to accuracy only apply to a distance to the object to be detected of 1 ... 2.5  mm.

Classifications

SystemClasscode
ECLASS 13.027274004
ECLASS 12.027274004
ECLASS 11.027270702
ECLASS 10.0.127270702
ECLASS 9.027270702
ECLASS 8.027270702
ECLASS 5.127270702
ETIM 9.0EC001852
ETIM 8.0EC001852
ETIM 7.0EC001852
ETIM 6.0EC001852
ETIM 5.0EC001852
UNSPSC 12.139121550

Details: PMI14V-F112-U-IO-2M-V31

Informative Literature: PMI14V-F112-U-IO-2M-V31

Language Selection:
LiteratureLanguageFile TypeFile Size
Product Overview - Inductive Positioning SystemsENGPDF1289 KB

Approvals: PMI14V-F112-U-IO-2M-V31

Language Selection:
Declaration of ConformityCertificate No.LanguageFile TypeFile Size
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)DOC-4864AALLPDF1230 KB
UK Declaration of Conformity (P+F)TDOC-6430_ENGENGPDF1284 KB

Associated Products: PMI14V-F112-U-IO-2M-V31

Accessories
Damping element for sensors of type F90, F112, and F166; side holefa
Cordset M8 socket straight to M12 plug straight A-coded, 4-pin, PUR cable greyfa
Damping element for sensors of type F90, F112, and F166; front holefa
EtherNet/IP IO-Link master with 8 inputs/outputs, DIN rail, screw terminalfa
PROFINET IO IO-Link master with 8 inputs/outputs, DIN rail, push-in terminalsfa
PROFINET IO IO-Link master with 8 inputs/outputs, DIN rail, screw terminalfa
IO-Link master, supply via USB port or separate power supply, LED indicators, M12 plug for sensor connectionfa
EtherNet/IP IO-Link master with 8 inputs/outputs, DIN rail, push-in connectorsfa
torque screwdriver (0.6 Nm)fa
plug-in cap M12fa