Serviceline Industrial Sensors
Serviceline Explosion Protection
Connection cable, Ethernet V1D-M16H-GN1M-PUR-E1S-V45-G
- Hard-wearing PUR cable
- Suitable for drag chains and abrasion resistant
- Industrial Ethernet
- D coding for Ethernet
- Conforms to PROFINET
- CAT5/CAT5e cable
- Free of paint wetting interfering substances
- Halogen-free
- Rear/screw mounting
- Image is generic for this device type and may deviate from the specific variant
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Download the complete datasheet as a PDF:
Datasheet excerpt: Technical data of V1D-M16H-GN1M-PUR-E1S-V45-G
| Product Description |
|---|
| Ethernet bus cable receptacle M12 socket straight D-coded to RJ45 Ethernet-coded, 4-pin, PUR cable green, Cat5e, shielded, drag chain suitable |
| General specifications | ||
|---|---|---|
| Connector 1 | ||
| Connection | socket | |
| Construction type | M12 | |
| Style | straight | |
| Locking | screw connection | |
| Number of pins | 4 | |
| Coding | D-coded | |
| Customization | Receptacles | |
| Connector 2 | ||
| Connection | plug | |
| Construction type | RJ45 | |
| Style | straight | |
| Locking | snap locking | |
| Number of pins | 8 | |
| Coding | EtherNet/IP / PROFINET | |
| Electrical specifications | ||
| Operating voltage | max. 48 V AC / 60 V DC | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| Plug connection | connector M12 x 1 : IEC 61076-2-101 connector RJ45 : IEC 60603-7 |
|
| Component category | CAT5 (IEC 11801) , CAT5e (IEC 61156-6) | |
| Flammability | IEC 60332-1-2 / UL 2556 / ISO 6722-1 5.22 (UN ECE-R 118.01) | |
| Ambient conditions | ||
| Ambient temperature | ||
| Connector 1 | -40 ... 90 °C (-40 ... 194 °F) | |
| Cable, fixed | -30 ... 70 °C (-22 ... 158 °F) , UL: -20 ... 70 °C (-4 ... 158 °F) | |
| Cable, flexing | -20 ... 70 °C (-4 ... 158 °F) | |
| Mechanical specifications | ||
| Connector 1 | ||
| Tightening torque | 0.6 Nm | |
| Tool installation | Rear mounting M16 , SW = 17 mm and SW = 19 mm | |
| Mating cycles | min. 100 | |
| Shielding | shield connected to connector | |
| Degree of protection | IP67 | |
| Connector 2 | ||
| Loosening protection | available | |
| Mating cycles | min. 100 | |
| Shielding | shield connected to connector | |
| Degree of protection | IP20 | |
| Cable | according to IEC/EN 60228 (DIN VDE 0295) class 5 | |
| Sheath diameter | 6 mm | |
| Bending radius | > 10 x cable diameter, moving > 8 x cable diameter, fixed |
|
| Sheath stripping force | max. 60 N / 100 mm | |
| Sheath color | green (similar to RAL 6018) | |
| Number of cores | 4 | |
| Core cross section | 0.34 mm2 / 22 AWG | |
| Cores color | Core 1-1: yellow Core 2-3: white Core 3-2: orange Core 4-6: blue |
|
| Core construction | 7 x 0.254 mm ∅ twisted quad |
|
| Shield | aluminum-lined polyester foil Tinned copper braiding |
|
| Length | 1 m | |
| Drag chain suitability | ||
| Drag chain cycles | max. 1000000 | |
| Motion velocity | max. 3 m/s | |
| Traverse distance | max. 5 m | |
| Acceleration | max. 2 m/s2 | |
| Mass | 73.04 g | |
| Material | ||
| PWIS free | yes | |
| Halogen-free | yes | |
| Connector 1 | ||
| Screw connection | Zinc diecast, nickel-plated | |
| Seal | FKM | |
| Contact surface | Au | |
| Flammability | V-2 | |
| Connector 2 | ||
| Body | PA, green | |
| Flammability | V-0 | |
| Cable | ||
| Sheathing | PUR based on polyether | |
| Core insulation | PP | |
| Flammability | FT2 complies with UN ECE-R 118.01 |
|
| General information | ||
| Scope of delivery | locknut included | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27060307 |
| ECLASS 12.0 | 27060307 |
| ECLASS 11.0 | 27060307 |
| ECLASS 10.0.1 | 27060307 |
| ECLASS 9.0 | 27060390 |
| ECLASS 8.0 | 27060390 |
| ECLASS 5.1 | 27279201 |
| ETIM 9.0 | EC001855 |
| ETIM 8.0 | EC001855 |
| ETIM 7.0 | EC001855 |
| ETIM 6.0 | EC001855 |
| ETIM 5.0 | EC002585 |
| UNSPSC 12.1 | 31251501 |
Details: V1D-M16H-GN1M-PUR-E1S-V45-G
Design / Simulation: V1D-M16H-GN1M-PUR-E1S-V45-G
| CAD | Language | File Type | File Size |
|---|---|---|---|
| CAD 3-D / CAD 3-D | ALL | STP | 2517 KB |
| CAD Portal / CAD Portal | ALL | LINK | --- |
Approvals: V1D-M16H-GN1M-PUR-E1S-V45-G
| Declaration of Conformity | Certificate No. | Language | File Type | File Size |
|---|---|---|---|---|
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-4458A | ALL | 287 KB | |
| UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F) | DOC-6744 | ALL | 213 KB |
Associated Products: V1D-M16H-GN1M-PUR-E1S-V45-G
| Accessories | ||||||
|---|---|---|---|---|---|---|
|
||||||
Pepperl+Fuchs (Pty) Ltd
8 Glen Eagle Office Park
Koorsboom Ave, Glen Marais, Kempton Park
1619 Johannesburg
South Africa
info@za.pepperl-fuchs.com
+27 87985 0797
© 2024 All Rights Reserved.
Pepperl+Fuchs is a leading developer and manufacturer of electronic sensors and components for the global automation market. Continuous innovation, enduring quality, and steady growth have been the foundation of our success for more than 70 years. Pepperl+Fuchs employs 6,300 people worldwide and has manufacturing facilities in Germany, USA, Singapore, Hungary, Indonesia and Vietnam, most of them ISO 9001 certified.