IO-Link printed circuit board module ICA-8DIO-CB10-IO
- Outputs short-circuit and overload proof
- Connection via lead
- IO-Link interface
- Ultra-compact enclosure
- 8 digital inputs/outputs can be configured
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Download the complete datasheet as a PDF:
Datasheet excerpt: Technical data of ICA-8DIO-CB10-IO
| Product Description |
|---|
| I/O hub with IO-Link interface |
| Indicators/operating means | ||
|---|---|---|
| LED PWR | LED green: flashing with short break (1 Hz) - IO-Link mode | |
| LED OL | overload of sensor power supply; LED red | |
| LED IO | Switching status/overload (input/output); 8 LED yellow/red yellow: input/output active red: output overload |
|
| Electrical specifications | ||
| Operating voltage | 18 ... 30 V DC, PELV |
|
| No-load supply current | max. 25 mA | |
| Operating current | max. 2 A | |
| Protection class | III | |
| Interface | ||
| Interface type | IO-Link | |
| IO-Link revision | 1.1 | |
| Device profile | Identification and Diagnosis - I&D | |
| Process data | Inputs 2 Byte - Input signals 8 Bit - diagnosis signals 4 Bit Outputs 2 Byte - Output signals 8 Bit - Special functions 8 Bit |
|
| Vendor ID | 1 (0x0001) | |
| Device ID | 984577 (0x0F0601) | |
| Data transfer rate | COM3 (230.4 kbits/s) | |
| Min. cycle time | 1 ms | |
| SIO mode support | no | |
| Compatible master port type | Class A , Class B | |
| Input | ||
| Number/Type | 8 Inputs for 3-wire sensors (PNP), DC (IO1 ... IO8) | |
| Supply | from IO-Link | |
| Voltage | 18 ... 30 V | |
| Current loading capacity | 400 mA , overload and short-circuit protected | |
| Input current | ≤ 5 mA (limited internally) | |
| Switching point | Type 1 according to IEC 61131-2 | |
| Output | ||
| Number/Type | 8 electronic outputs, PNP (IO1 … IO8), overload proof and short-circuit proof | |
| Supply | from IO-Link | |
| Voltage | ≥ (UB - 1.5 V) | |
| Current | 200 mA per output | |
| Directive conformity | ||
| Electromagnetic compatibility | ||
| Directive 2014/30/EU | EN 61326-1:2013 EN 55011:2016 |
|
| Standard conformity | ||
| Degree of protection | EN 60529:2000 | |
| Fieldbus standard | EN 61131-9:2013 | |
| Input | EN 61131-2:2007 | |
| Communication interface | IEC 61131-9 / IO-Link V1.1.3 | |
| Emitted interference | EN 61000-6-4:2007 | |
| Noise immunity | EN 61000-6-2:2005, EN 61326-1:2006 | |
| Approvals and certificates | ||
| UL approval | Protection class IP20 is not included in the UL approval. The protection class is tested by Pepperl+Fuchs. | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 70 °C (-40 ... 158 °F) | |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
| Relative humidity | 85 % non-condensing | |
| Climatic conditions | For indoor use only | |
| Altitude | ≤ 5000 m above MSL | |
| Shock and impact resistance | 30 g, 11 ms in 6 spatial directions, 3 shocks 10 g, 16 ms in 6 spatial directions, 1000 shocks | |
| Vibration resistance | 0.35 mm / 5 g 5 ... 500 Hz | |
| Pollution degree | 2 | |
| Mechanical specifications | ||
| Degree of protection | IP20 according to EN 60529 | |
| Connection | 200 mm, PVC cable 0.5 mm2 |
|
| Material | ||
| Housing | Polyamide hot-melt adhesive | |
| Mass | 33 g | |
| Dimensions | ||
| Height | 10 mm | |
| Width | 36 mm | |
| Length | 39.5 mm | |
| Note | This device is maintenance-free. If the device is used in a manner not specified by the manufaturer, the protection provided by the device may be impaired. | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27242604 |
| ECLASS 12.0 | 27242604 |
| ECLASS 11.0 | 27242604 |
| ECLASS 10.0.1 | 27242604 |
| ECLASS 9.0 | 27242604 |
| ECLASS 8.0 | 27242604 |
| ECLASS 5.1 | 27242604 |
| ETIM 9.0 | EC001599 |
| ETIM 8.0 | EC001599 |
| ETIM 7.0 | EC001599 |
| ETIM 6.0 | EC001599 |
| ETIM 5.0 | EC001599 |
| UNSPSC 12.1 | 39121535 |
Details: ICA-8DIO-CB10-IO
Function
The IO-Link PCB module is ideally suited for the integration of customer-specific electronics, e.g. illuminated pushbuttons or LED lights.
It has eight freely configurable digital inputs/outputs which are transmitted in bundles via IO-Link. The digital inputs/outputs and IO-Link communication are connected via cable strands.
The module is completely powered via a Class A port from IO-Link.
The inputs and outputs are short-circuit and overload-proof.
Product Documentation: ICA-8DIO-CB10-IO
| Parameter Information | Language | File Type | File Size |
|---|---|---|---|
| IO-Link Parameter Datasheet ICA-8DIO-CB10-IO | ENG | 458 KB |
Design / Simulation: ICA-8DIO-CB10-IO
| CAD | Language | File Type | File Size |
|---|---|---|---|
| CAD 3-D / CAD 3-D | ALL | STP | 194 KB |
Approvals: ICA-8DIO-CB10-IO
| Certificates | Certificate No. | Language | File Type | File Size |
|---|---|---|---|---|
| IO-Link Manufacturer Declaration | CERT-6654 | ALL | 273 KB | |
| Declaration of Conformity | ||||
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-5866 | ALL | 115 KB | |
| UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F) | DOC-5867 | ALL | 113 KB | |
Software: ICA-8DIO-CB10-IO
| Device Description Files/Drivers | Release Info | File Type | File Size |
|---|---|---|---|
| IODD for ICA-8DIO-CB10-IO / IODD für ICA-8DIO-CB10-IO | V1.02.000 / 2022-09-07 | ZIP | 233 KB |
| Software Tools | |||
| IO-Link Offline Parameterization Tool / IO-Link Offline-Parametriertool | V1.00.006 / 2022-07-10 | ZIP | 96138 KB |
Associated Products: ICA-8DIO-CB10-IO
| Accessory of | ||||||
|---|---|---|---|---|---|---|
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
Connect your factory floor sensors to the cloud and start your digital transformation with the new IIoT starter kits.
Pepperl+Fuchs (Pty) Ltd
8 Glen Eagle Office Park
Koorsboom Ave, Glen Marais, Kempton Park
1619 Johannesburg
South Africa
info@za.pepperl-fuchs.com
+27 87985 0797
Pepperl+Fuchs is a leading developer and manufacturer of electronic sensors and components for the global automation market. Continuous innovation, enduring quality, and steady growth have been the foundation of our success for more than 70 years. Pepperl+Fuchs employs 6,300 people worldwide and has manufacturing facilities in Germany, USA, Singapore, Hungary, Indonesia and Vietnam, most of them ISO 9001 certified.