Serviceline Industrial Sensors
Serviceline Explosion Protection

6100 Series Mini Vent EPV-6100-MPM-*

EPV-6100-MPM-*
  • Flow rate: 2,000 ... 6,000 l/min
  • Intrinsically safe when connected to 6100 control unit
  • Compact footprint

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Download the complete datasheet as a PDF:


Datasheet excerpt: Technical data of  EPV-6100-MPM-*

Product Description
6100 series purge and pressurization enclosure protection mini vent
General specifications
Series6100 Series
SystemEx pxb Purge
Hazardous environmentgas
Electrical specifications
Connection
PowerIntrinsically safe connection to the 6100 control unit
Signal2-wire intrinsically safe pressure switch
Connection2-wire
Pneumatic parameters
Protective gas supplyClean air or inert gas
Safe pressure0.625 mbar [0.25 in wc / 6.4 mm wc)
Enclosure pressure0 ... 50 mbar (0 ... 20.1 in wc / 0 ... 510.5 mm wc)
Flow rate for leakage compensationdepends on enclosure seal
based on completely sealed enclosure
Breaking pressureApprox. 10 mbar (4.0 in wc)
Approx. 15 mbar (6.0 in wc)
Approx. 20 mbar (8.0 in wc)
Approx. 30 mbar (12.1 in wc)
Approx. 40 mbar (16.1 in wc)
Directive conformity
Electromagnetic compatibility
Directive 2014/30/EUEN 61326-1:2013
RoHS
Directive 2011/65/EU (RoHS)EN 50581:2012
Ambient conditions
Ambient temperature-20 ... 60 °C (-4 ... 140 °F)
Storage temperature-20 ... 80 °C (-4 ... 176 °F)
Relative humidity5 ... 95 %, noncondensing
Vibration resistanceEN 60068-2-6
Impact resistanceEN 60068-2-27
Mechanical specifications
Material316L stainless steel (housing)
Installation-gravity dependent
-air outlet, screen side must be facing down
Mass9 kg (20 lb)
Data for application in connection with hazardous areas
CertificateCML 19 ATEX 1425X
MarkingEx-Hexagon II2G Ex db eb ib [ib Gb][pxb Gb] IIC T4 Gb
Directive conformity
Directive 2014/34/EUEN IEC 60079-0:2018
EN 60079-1:2014
EN 60079-2:2014
EN 60079-7:2015
EN 60079-11:2012
International approvals
IECEx approvalIECEx CML 19.0156X
Ex db eb ib [ib Gb][pxb Gb] IIC T4 Gb
General information
Supplementary informationEC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com.
Supplemental Standards : EN 61010-1:2010

Classifications

SystemClasscode
ECLASS 13.027180591
ECLASS 12.027180591
ECLASS 11.027180591
ECLASS 10.0.127291390
ECLASS 9.027291390
ECLASS 8.027291390
ECLASS 5.140050501
ETIM 9.0EC000243
ETIM 8.0EC000243
ETIM 7.0EC000243
ETIM 6.0EC000243
ETIM 5.0EC000243
UNSPSC 12.139121303

Details: EPV-6100-MPM-*

Function

The Motor Purge Mini Vent pressure relief device exhausts excess pressure from the motor/enclosure. It features a pressure switch that monitors the differential pressure across the vent orifice during the purging cycle. The differential pressure is used to verify the flow through the vent. The pressure switch is connected to the 6100 EPCU. It is intrinsically safe through the galvanic isolation barrier within the 6100 EPCU.

Product Documentation: EPV-6100-MPM-*

Language Selection:
Safety and Security DocumentationLanguageFile TypeFile Size
Instruction manualENGPDF172 KB
Manuals
ManualENGPDF5218 KB

Approvals: EPV-6100-MPM-*

Language Selection:
CertificatesCertificate No.LanguageFile TypeFile Size
Brasil Certificate of ComplianceDNV 24.0062 XALLPDF421 KB
Europe CML ATEX Certificate II 2 GCML 19ATEX1425XALLPDF118 KB
IECEx Certificate of ConformityIECEx CML 19.0156XALLLINK---
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitätserklärung (P+F)DOC-B0D7CALLPDF113 KB
UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F)DOC-B0F6ALLPDF160 KB

Associated Products: EPV-6100-MPM-*

Accessories
pa