HART MUX Primary Module KFD2-HMM-16

16-channel
24 V DC supply (Power Rail)
HART field device input (revision 5 to 7)
Up to 15 KFD0-HMS-16 HART MUX secondary modules can be connected
Up to SIL 3 acc. to IEC/EN 61508

Technical Data
Informative Literature
Product Documentation
Design / Simulation
Approvals
Software
Productos asociados
Pregunte a un Experto

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Descargue la hoja de datos completa en PDF:

Extracto de la hoja de datos: Información técnica del KFD2-HMM-16

Descripción del producto
HART MUX Primary Module

Functional safety related parameters
Safety Integrity Level (SIL)		SIL 3
Supply
Connection		terminals 17+, 18-
Rated voltage		20 ... 32 V DC typical at 100 mA
Power consumption		max. 3 W
HART signal channels (non-intrinsically safe)
Conformity		HART field device input (revision 5 to 7)
Connection		26-pin flat cable for analog connections 14-pin flat cable for primary module/secondary module connection between KFD2-HMM-16 and KFD0-HMS-16
Leakage current		< 3 µA at -20 ... 85 °C (-4 ... 185 °F)
Terminating resistor		external 230 ... 500 Ω standard (up to 1000 Ω possible)
Output voltage		≥ 400 mV _ss (with the terminator resistance specified above)
Output resistance		100 Ω or smaller, capacitive coupling
Input impedance		according to HART specification
Input voltage range		0.08 ... 4 V _ss ; typ. ± 5.2 V as local reference
Interface
Transfer rate		9600, 19200, or 38400 Bit/s (selectable with DIL switch (2 and 3) by the user)
Type		RS-485 , 2-wire multidrop
Address selection		One of 31 possible addresses selectable per DIL switch (4 ... 8)
Indicators/settings
Control elements		DIP switch
Configuration		via DIP switches
Labeling		space for labeling at the front
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Conformity
Degree of protection		IEC 60529:2001
Ambient conditions
Ambient temperature		-20 ... 60 °C (-4 ... 140 °F)
Mechanical specifications
Degree of protection		IP20
Connection		screw terminals
Mass		approx. 250 g
Dimensions		40 x 107 x 115 mm (1.6 x 4.2 x 4.5 inch) (W x H x D) , housing type C1
Mounting		on 35 mm DIN mounting rail acc. to EN 60715:2001
Data for application in connection with hazardous areas
Certificate		PF 07 CERT 1143 X
	Marking	II 3G Ex nA IIC T4 Gc
Directive conformity
	Directive 2014/34/EU	EN 60079-0:2012+A11:2013 , EN 60079-15:2010
General information
Supplementary information		Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

Classifications

System	Classcode
ECLASS 13.0	27210190
ECLASS 12.0	27210190
ECLASS 11.0	27210190
ECLASS 10.0.1	27210190
ECLASS 9.0	27210190
ECLASS 8.0	27210190
ECLASS 5.1	27242692
ETIM 9.0	EC001601
ETIM 8.0	EC001601
ETIM 7.0	EC001601
ETIM 6.0	EC001601
ETIM 5.0	EC001597
UNSPSC 12.1	39121008

Details: KFD2-HMM-16

Informative Literature: KFD2-HMM-16

Literature	Idioma	Tipo de archivo	Tamaño
Application Report - Biological Cleaning of Wastwater and Secondary Sedimentation Stage	ENG	PDF	566 KB
Application Report - Generating Electricity in Coal-Fired Power Plants	ENG	PDF	412 KB
Application Report - Sand Trap and Preliminary Sedimentation Stage	ENG	PDF	448 KB
Application Report - Screening Systems in Sewage Treatment Plants	ENG	PDF	577 KB

Product Documentation: KFD2-HMM-16

Safety and Security Documentation	Idioma	Tipo de archivo	Tamaño
Manual de instrucciones	SPA	PDF	87 KB
Manuals
Manual KFD-HM-16	ENG	PDF	8323 KB

Design / Simulation: KFD2-HMM-16

CAD	Idioma	Tipo de archivo	Tamaño
CAD 3-D / CAD 3-D	ALL	STP	186 KB
CAD Portal / CAD Portal	ALL	LINK	---
CAE
CAE EPLAN Data Portal / CAE EPLAN Data Portal	ALL	LINK	---
CAE EPLAN macro EDZ / CAE EPLAN Makro EDZ	ALL	EDZ	212 KB

Approvals: KFD2-HMM-16

Certificates	Número de Certificado	Idioma	Tipo de archivo	Tamaño
Europe Pepperl+Fuchs Certificate of Compliance ATEX Category 3	PF 07 CERT 1143 X	ALL	PDF	209 KB
exida Functional Safety Assessment	P+F 02/4-11 R006	ALL	PDF	348 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)	DOC-0777D	ALL	PDF	1040 KB
UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F)	DOC-5294A	ALL	PDF	1037 KB

Software: KFD2-HMM-16

Device Description Files/Drivers	Liberar Info	Tipo de archivo	Tamaño
DTM Collection HART-Multiplexer / DTM Collection HART-Multiplexer	2.0.1.208	ZIP	13306 KB
Software Tools
PACTware 4.1 SP6 / PACTware 4.1 SP6	4.1.0.53	ZIP	43327 KB
PACTware 5.0 / PACTware 5.0	5.0.5.31	ZIP	44203 KB

Productos asociados: KFD2-HMM-16

Matching System Components

	FI-PFH-NS0137-R HART Termination Board
	Connection board for K-System HART Multiplexer, 16-channel, Interface for series connection or parallel connection, Integrated, switchable 220 Ω resistor, Connection via screw terminalspa

	KFD0-HMS-16 HART MUX Secondary Module
	16-channel, No external power required, HART field device input (revision 5 to 7), Used with HART MUX primary module KFD2-HMM-16, Up to SIL 3 acc. to IEC/EN 61508pa

	FI-PFH-TR-AO-380X HART Termination Board
	System board for Schneider Electric, Tricon series by Triconex, HART Termination Board (ETP) for Tricon AO module, For 8-channel AO card 3805E, 8-channel, Field side: pluggable screw terminals, green, Control side: ELCO socket, 56-pinpa

	FI-PFH-TR-AI-370X-GP HART Termination Board
	System board for Schneider Electric, Tricon series by Triconex, TAN48 approval, HART Termination Board (ETP) for Tricon v10 AI module, For 16-channel AI cards 3700, 3700A, 3703E and 3721, 16-channel, Field side: pluggable screw terminals, green, Control side: ELCO socket, 56-pinpa

Matching System Components

	K-HM14 HART Connection Cable with Connectors
	K-System accessory, Connection cable for KFD2-HMM-16 to up to 15 KFD0-HMS-16, 14-pin ribbon cablepa

	K-HM26-114025 HART Connection Cable with Connectors
	K-System accessory, Connection cable for KF-HM-16 to Termination Board, 26-pin ribbon cablepa

	K-HM26 HART Connection Cable with Connectors
	K-System accessory, Connection cable for KF-HM-16 to Termination Board, 26-pin ribbon cablepa

	PACTware 5.0 FDT Framework
	Universal DTM host platform, For all DTMs of Pepperl+Fuchs, Approved FDT/DTM technology, Free of charge, Download from Pepperl+Fuchs websitepa

	DTM Generic HART Universal DTM
	Device DTM, For HART multiplexers, Communication DTMpa

	DTM HART Comm Commmunication drivers
	Communication DTM, Frame application, like e. g. PACTware, must be installed separatelypa

	DTM HART Multiplexer Device Type Manager (DTM)
	Human machine interface, For HiDMux2700, For KFD2-HMM-16/KFD0-HMS-16pa

	ICDM-RX/TCP-ST/RJ45-DIN Serial Device Server
	Serial Device Server 1-port DIN Rail Screw Terminalfa

Accessories

	KF-ST-5GN Terminal Block
	3-pin screw terminal, For KF modules of K-System, Packaging unit: 5 pieces greenpa

	KF-CP Coding Pins
	Coding of K-System terminal blocks, Coding of LB/FB-System front sockets, Packaging unit: 20 x 6 coding pinspa

Notas generales sobre la información de los productos de Pepperl+Fuchs

Enlaces directos

Selector for Safety Products

Choose from various selection criteria like safety integrity level, performance level, device function, and signal type and find the SIL/PL assessed device that you are looking for.

Visite el Functional Safety Hub

Varios cientos de productos con evaluación de SIL/PL, herramientas gratuitas y folletos en un mismo lugar: el "Functional Safety Hub" es su punto de partida para la implementación de funciones de seguridad.

Safety Product Selector for SIL/PL Assessed Products

Selector de productos de seguridad para productos certificados SIL/PL

¿Buscas un producto específico con certificación SIL/PL?. Nuestra herramienta de selección le proporciona una descripción general de los dispositivos certificados en seguridad, incluido el nivel SIL y el PL ¡Pruébelo!

Pepperl+Fuchs, S.A.
Txori-Erri Etorbidea, 46
Edificio Esser
48150 Sondika (Vizcaya)
España
sov@es.pepperl-fuchs.com
phone +34 94 4535 020

Pepperl + Fuchs es líder en el desarrollo y la fabricación de sensores electrónicos y componentes para el mercado de la automatización global. Su incesante innovación, calidad duradera y crecimiento constante garantizan el éxito continuado, desde hace más de 70 años. Pepperl + Fuchs emplea a 6.300 personas en todo el mundo y cuenta con fábricas en Alemania, EE.UU., Singapur, Hungría, Indonesia y Vietnam, la mayoría de ellas con certificado ISO 9001.