Active infrared scanner DoorScan-OS-1P-1200

Moving presence sensor for automatic doors
SIL 2, certified in accordance with DIN 18650/EN 16005
Exceptional detection reliability
Reliable operation with all floor coverings
Complete protection up to the wall without sensor shutoff
Additional protection of the main and secondary closing edges
Tool-free module mounting using snap-in mechanism
Switchable NPN or PNP outputs

Technical Data
Product Documentation
Design / Simulation
Approvals
Associated Products

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Ladda ned datablad som PDF::

Utdrag ur datablad: Tekniska data för DoorScan-OS-1P-1200

Product Description
Light curtain for individual protection for automatic doors in accordance with DIN 18650/EN 16005, complete system for a door measuring up to 1200 mm wide, NPN output

General specifications
Detection range min.		0 ... 1500 mm
Detection range max.		0 ... 3500 mm (Upright CA test body)
Sensing range		1000 mm at installation height of 2100 mm
Light source		IRED 850 nm
Black-white difference (6 %/90 %)		< 2 % at 2000 mm sensor range
Number of beams		10
Operating mode		Background evaluation
Diameter of the light spot		8 cm at 2000 mm sensor range
Functional safety related parameters
Safety Integrity Level (SIL)		SIL 2
Performance level (PL)		PL d
Category		Cat. 2
MTTF_d		112.7 a
Mission Time (T_M)		10 a
Indicators/operating means
Function indicator		Receiver: Red LED: detection, operating reserve, fault code Interface: Red LED: detection, operating reserve, fault code Yellow LED: teach status Green LED: blank status Green LED: DIP switch status
Control elements		Teach-In key , DIP switch for selection of operating modes
Electrical specifications
Operating voltage		24 V DC +/- 20 %
No-load supply current		max. 200 mA
Power consumption		3.3 W
Input
Test input		high level ≥ 15 V low level ≤ 2 V
Control input		Standby active at U = 11 V DC at 30 V DC
Output
Switching type		light-on
Signal output		switchable NPN or PNP , short-circuit protected
Switching voltage		max. 30 V DC
Switching current		max. 100 mA
Response time		≤ 52 ms ≤ 200 ms in boost operating mode
Conformity
Functional safety		ISO 13849-1 ; EN 61508 part1-4
Product standard		EN 12978
Approvals and certificates
CCC approval		CCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature		-30 ... 60 °C (-22 ... 140 °F)
Mechanical specifications
Housing length L		1200 mm
Mounting height		max. 3500 mm
Degree of protection		IP54 (when mounted)
Connection		Plug-in terminal with 6-wire connection cable
Material
	Housing	Aluminum / PA
	Optical face	PC (Polycarbonate)
Mass		approx. 1400 g
Dimensions		(W x H x D) : 42 mm x 1200 mm x 37 mm
	Height	42 mm
	Depth	37 mm
	Length	1200 mm
General information
Scope of delivery		Sensor system for door hinge side or hinge opposite side (1 emitter and receiver module each, 1 interface module, double-ended cordset, 1 sensing strip each, and sensor window, 2 end caps)

Classifications

System	Classcode
ECLASS 13.0	27270913
ECLASS 12.0	27270913
ECLASS 11.0	27270913
ECLASS 10.0.1	27270913
ECLASS 9.0	27270913
ECLASS 8.0	27270913
ECLASS 5.1	27270903
ETIM 9.0	EC002550
ETIM 8.0	EC002550
ETIM 7.0	EC002550
ETIM 6.0	EC002550
ETIM 5.0	EC001821
UNSPSC 12.1	39121528

Details: DoorScan-OS-1P-1200

Product Documentation: DoorScan-OS-1P-1200

Manuals	Language	File Type	File Size
Manual	ENG	PDF	2756 KB

Design / Simulation: DoorScan-OS-1P-1200

CAD	Language	File Type	File Size
CAD 3-D / CAD 3-D	ALL	STP	2137 KB
CAD Portal / CAD Portal	ALL	LINK	---

Approvals: DoorScan-OS-1P-1200

Certificates	Cert No.	Language	File Type	File Size
EU TUV Nord EC-Type Exam. Certificate Functional Safety	44 205 13 095719	ALL	PDF	89 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)	DOC-0115F	ALL	PDF	480 KB

Associated Products: DoorScan-OS-1P-1200

Accessories

	DoorScan Weather Cap L1200 Weather protection cover
	Weather protection cover for sensing strips, Protection from adverse effects of weather such as rain, snow, etc., Can be cut to the required lengths, Retrofitting possible with already installed sensing stripsfa

	DoorScan Transfer Loop DoorScan^® door transition cable
	Door transition cable to connect the sensor to the controller, Connection to interface module, Operating voltage: max. 300 V, Connection: screw terminal , 6-pinfa

	DoorScan Connection Cable 5p Connection cable DoorScan^®
	Connecting cable for sensor modules, Serves as the internal bus connection for module communication, Ribbon cable, Up to 5 sensor modules can be connected, Operating voltage: max. 50 V, Connection: 5 x plug-in terminal, 8-pinfa

	DoorScan Cable BS/BGS Connection cable DoorScan^®
	Connecting cable between hinge side and leading edge side, Connection to interface module, Operating voltage: max. 300 V, Connection: 2 x plug-in terminalfa

	DoorScan End Caps End cap set for DoorScan^® sensor profile
	End caps for DoorScan^® sensing stripfa

	TopScan-S Profile L1400 Accessories
	Aluminum profile for TopScan-S Series, Length 1400 mmfa

	TopScan-S Cover L1400 Accessories
	Profile cover for aluminum profile for TopScan-S Series, Length 1400 mmfa

	DoorScan Relay Module Accessory DGE
	Sensor module for configurable DoorScan^® presence sensor, Conversion of semiconductor signals to relay output signals, Tool-free module mounting using snap-in mechanism, Operating voltage: 24 V DC ± 20 %, Signal output: Hinge side (BS): Relay, 1 alternator , Opposite hinge side (BGS): Relay, 1 alternator, Connection: plug strip , 6-pin Interface , 4-pin Relay supplyfa

	DoorScan Adapter Accessory DGE
	Cable adapter for configurable DoorScan presence sensor, Adapter for connecting cables (e.g., to glass doors, existing cables), Tool-free module mounting using snap-in mechanism, Connection: plug strip 6-pin , socket 8-pin , solder pins 8-pinfa

	DoorScan Cable Adapter Accessory DGE
	Cable adapter for configurable DoorScan presence sensor, Cable adapter for extending the ribbon cable, Tool-free module mounting using snap-in mechanism, Connection: socket 8-pinfa

Allmänna kommentarer om produktinformationen från Pepperl+Fuchs

Pepperl+Fuchs AB
Bultgatan 40 A
442 40 Kungälv
Sverige
orgnr. 556212-2126
info@se.pepperl-fuchs.com
phone +46 303 246070

Pepperl+Fuchs is a leading developer and manufacturer of electronic sensors and components for the global automation market. Continuous innovation, enduring quality, and steady growth have been the foundation of our success for more than 70 years. Pepperl+Fuchs employs 6,300 people worldwide and has manufacturing facilities in Germany, USA, Singapore, Hungary, Indonesia and Vietnam, most of them ISO 9001 certified.