Serviceline Industrial Sensors
Serviceline Explosion Protection
Read head WCS3B-LS221EHS-OM
- RS-485 interface
- Non-contact, absolute position encoder
- Automatic detection of dirt accumulation
- Speed transfer
- Extended temperature range
- Measuring length max. 629 m
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Ladda ned datablad som PDF::
Utdrag ur datablad: Tekniska data för WCS3B-LS221EHS-OM
| Product Description |
|---|
| Read head, RS-485 interface, with RS-485 terminal resistor |
| General specifications | ||
|---|---|---|
| Passage speed | ≤ 12.5 m/s | |
| Measuring length | max. 629 m | |
| Free tolerances to code rail | horizontal: 28 mm ( ± 14 mm ) vertical: 25.5 mm ( +11.5 mm/-14 mm ) |
|
| Resolution | ± 0.4 mm (1,250 positions/m) | |
| Functional safety related parameters | ||
| MTTFd | 44 a | |
| Mission Time (TM) | 10 a | |
| Diagnostic Coverage (DC) | 0 % | |
| Indicators/operating means | ||
| Data flow indicator | 1 LED yellow flashing: data communication active |
|
| Velocity indicator | 2 LED yellow on: if the speed limit is not exceeded off, if speed limit is exceeded |
|
| Error indicator | 3 Dual LED green on: code rail detected, normal function green flashing: invalid position red on: internal diagnostic test failed red flashing: read head outside of code rail |
|
| Electrical specifications | ||
| Operating voltage | 10 ... 30 V DC | |
| Power consumption | 11 VA at 24 V DC | |
| Interface | ||
| Interface type | RS 485 interface | |
| Data output code | binary code | |
| Protocol | 2 , extended to 629 m | |
| Transfer rate | 62.5 kBit/s | |
| Address | 0 | |
| Termination | with RS 485 termination | |
| Query cycle time | ≥ 5 ms | |
| Output | ||
| Output velocity | switching output | |
| Output type | 1 switch output PNP, NO , short-circuit protected | |
| Switching voltage | Operating voltage | |
| Switching current | 150 mA | |
| Standard conformity | ||
| Emitted interference | DIN EN 61000-6-4 , DIN EN 12015 | |
| Noise immunity | DIN EN 61000-6-2 , DIN EN 12016 | |
| Shock resistance | DIN EN 60068-2-27, half sine 30 g, 18 ms | |
| Vibration resistance | DIN EN 60068-2-6, sine, 5 g, 10 - 2000 Hz, 10 cycles | |
| Approvals and certificates | ||
| CSA approval | cCSAus Certified, General Purpose Class 2 power source |
|
| CCC approval | CCC approval / marking not required for products rated ≤36 V | |
| Ambient conditions | ||
| Operating temperature | -40 ... 60 °C (-40 ... 140 °F) | |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
| Mechanical specifications | ||
| Connection type | 5-pin, M12 x 1 connector | |
| Degree of protection | IP67 / IP69 | |
| Material | ||
| Housing | PET , PC (Polycarbonate) | |
| Mass | 1000 g | |
| Note | The reader must not be operated without the protective housing! | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27270918 |
| ECLASS 12.0 | 27270918 |
| ECLASS 11.0 | 27270701 |
| ECLASS 10.0.1 | 27270701 |
| ECLASS 9.0 | 27270701 |
| ECLASS 8.0 | 27270701 |
| ECLASS 5.1 | 27270701 |
| ETIM 9.0 | EC001852 |
| ETIM 8.0 | EC001852 |
| ETIM 7.0 | EC001852 |
| ETIM 6.0 | EC001852 |
| ETIM 5.0 | EC001852 |
| UNSPSC 12.1 | 41111945 |
Details: WCS3B-LS221EHS-OM
Informative Literature: WCS3B-LS221EHS-OM
| Literature | Language | File Type | File Size |
|---|---|---|---|
| Application Report - Position Encoding System (WCS) Tackles Positioning Tasks in Container Terminals | ENG | 226 KB | |
| Application Report - Position Encoding System (WCS) for Absolute Positioning in Galvanic Plants | ENG | 240 KB |
Product Documentation: WCS3B-LS221EHS-OM
| Manuals | Language | File Type | File Size |
|---|---|---|---|
| Manual WCS Electrical | ENG | 11790 KB | |
| Manual WCS Mechanical | ENG | 12338 KB |
Approvals: WCS3B-LS221EHS-OM
| Certificates | Cert No. | Language | File Type | File Size |
|---|---|---|---|---|
| Canada USA CSA Ordinary Location | 1007121 | ALL | 198 KB | |
| Declaration of Conformity | ||||
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-0909F | ALL | 87 KB | |
| UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F) | DOC-6636A | ALL | 84 KB | |
Pepperl+Fuchs AB
Bultgatan 40 A
442 40 Kungälv
Sverige
orgnr. 556212-2126
info@se.pepperl-fuchs.com
+46 303 246070
© 2024 All Rights Reserved.
Pepperl+Fuchs is a leading developer and manufacturer of electronic sensors and components for the global automation market. Continuous innovation, enduring quality, and steady growth have been the foundation of our success for more than 70 years. Pepperl+Fuchs employs 6,300 people worldwide and has manufacturing facilities in Germany, USA, Singapore, Hungary, Indonesia and Vietnam, most of them ISO 9001 certified.