Redundancy Module PS1000-D2-24.40.RM

12 V DC to 28 V DC input
2 inputs with 1 output
Output 24 V DC, 40 A
Housing width 36 mm
Built-in decoupling mosfets for 1+1 and N+1 redundancy
Only 72 mV voltage drop at 20 A output current
Only 1.7 W loss at 2 x 10 A and 5.9 W at 2 x 20 A input current
Reverse input polarity protection
Suitable for Zone 2/Div. 2 mounting

Technical Data
Informative Literature
Product Documentation
Design / Simulation
Approvals
Associated Products

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Ladda ned datablad som PDF::

Utdrag ur datablad: Tekniska data för PS1000-D2-24.40.RM

Electrical specifications
Voltage drop		input to output 72 mV at input 2 x 10 A 140 mV at input 2 x 20 A
Power dissipation		0.23 W no load 1.7 W at input 2 x 10 A 5.9 W at input 2 x 20 A
Input
Rated voltage		12 ... 28 V
Voltage range		8.4 ... 36.4 V DC
Current		2 x 20 A at ambient temperature < 60 °C (140 °F) 2 x 15 A at ambient temperature 70 °C (158 °F) 2 x 20 ... 32.5 A for up to 5 s for lower output currents see technical information
Output
Voltage range		12 ... 28 V DC
Current		40 A at ambient temperature < 60 °C (140 °F) 30 A at ambient temperature < 70 °C (158 °F) 65 A for up to 5 s max. 26 A in overload or short circuit mode (voltage < 6 V DC)
Galvanic isolation
Input/Output		SELV/PELV
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	IEC/EN 61000-6-1 , IEC/EN 61000-6-2 , IEC/EN 61000-6-3 , IEC/EN 61000-6-4
Low voltage
	Directive 2014/35/EU	EN 61010-1
RoHS
	Directive 2011/65/EU (RoHS)	IEC/EN 63000:2019
Conformity
Degree of protection		EN 60529
Shock resistance		EN 60068-2-27
Vibration resistance		EN 60068-2-6
Ambient conditions
Ambient temperature		-25 ... 70 °C (-13 ... 158 °F) , see technical information
Storage temperature		-40 ... 85 °C (-40 ... 185 °F)
Relative humidity		5 ... 95 %, noncondensing
Shock resistance		20 g , 11 ms or 30 g , 6 ms
Vibration resistance		2 ... 17.8 Hz : ± 1.6 mm , 17.8 ... 500 Hz : 2 g
Corrosion resistance		IEC 60068-2-60, Method 4 ISA-71.04, severity level G3
Mechanical specifications
Housing material		aluminum alloy , galvanized steel
Degree of protection		IP20
Connection
	Input	screw terminals conductor cross section: max. 6 mm² (AWG 20-10) cable diameter: max. 2.8 mm, wire end ferrules included stripped insulation length: 7 mm tightening torque: recommendet 0.8 Nm
	Output	screw terminals conductor cross section: max. 16 mm² (AWG 22-8) cable diameter: max. 5.2 mm, wire end ferrules included stripped insulation length: 12 mm tightening torque: recommendet 1.2 Nm
Mass		approx. 280 g
Dimensions		36 x 124 x 127 mm (W x H x D) , without DIN mounting rail
	Height	124 mm
	Width	36 mm
	Depth	127 mm
Mounting		on 35 mm DIN mounting rail acc. to EN 60715:2001
Data for application in connection with hazardous areas
ATEX approval
	ATEX certificate	EPS 11 ATEX 1 312 X
	ATEX marking	II 3G Ex ec II T4 Gc
Directive conformity
	Directive 2014/34/EU	EN 60079-0:2012+A11:2013 , EN 60079-7:2016 , EN 60079-15:2010
International approvals
UL approval		E223176
IECEx approval
	IECEx certificate	IECEx EPS 20.0057X
	IECEx marking	Ex ec IIC T4 Gc
	Standards	IEC 60079-0:2011 , IEC 60079-7:2015 , IEC 60079-15:2010
General information
Supplementary information		Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

Classifications

System	Classcode
ECLASS 13.0	27040790
ECLASS 12.0	27040790
ECLASS 11.0	27040790
ECLASS 10.0.1	27040790
ECLASS 9.0	27040790
ECLASS 8.0	27049090
ECLASS 5.1	27049090
ETIM 9.0	EC002542
ETIM 8.0	EC002542
ETIM 7.0	EC002542
ETIM 6.0	EC002542
ETIM 5.0	EC002542
UNSPSC 12.1	39121004

Details: PS1000-D2-24.40.RM

Informative Literature: PS1000-D2-24.40.RM

Literature	Language	File Type	File Size
Product Information - PS1000 for Global Use up to Zone 2/Div. 2	ENG	PDF	577 KB

Product Documentation: PS1000-D2-24.40.RM

Product information	Language	File Type	File Size
Technical information	ENG	PDF	2542 KB
Safety and Security Documentation
Instruction manual / Betriebsanleitung	ALL	PDF	225 KB
Instruction manual / Betriebsanleitung	ALL	PDF	291 KB

Design / Simulation: PS1000-D2-24.40.RM

CAD	Language	File Type	File Size
CAD 3-D / CAD 3-D	ALL	STP	3662 KB
CAD Portal / CAD Portal	ALL	LINK	---
CAE
CAE EPLAN macro EDZ / CAE EPLAN Makro EDZ	ALL	EDZ	187 KB

Approvals: PS1000-D2-24.40.RM

Certificates	Cert No.	Language	File Type	File Size
Bureau Veritas IECEx Certificate of Conformity	IECEx EPS 20.0057X	ALL	LINK	---
Canada, USA CSA Hazardous Location	CoC 80059967	ALL	PDF	84 KB
China SITIIAS CCC Ex Certificate	2023122303116293 (Mannheim)	ALL	PDF	519 KB
Europe Bureau Veritas ATEX Category 3 G	EPS 11 ATEX 1 312X	ALL	PDF	1011 KB
US CA UL	CoC E223176 RptRef E223176-20070416	ALL	PDF	444 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)	DOC-4794	ALL	PDF	73 KB
EU Declaration of Conformity (P+F)	TDOC-4794ASWE	SWE	PDF	183 KB

Associated Products: PS1000-D2-24.40.RM

Accessory of

	PS1000-A6-12.16 Power Supply
	100 V AC to 240 V AC wide-range input, Output 12 V DC, 16 A, 192 W, 1-phase, Housing width 39 mm, Efficiency up to 94.3 %, Minimal inrush current surge, Remote control for ON/OFF, DC OK relay contact, Suitable for Zone 2/Div. 2 mounting, Device type: device for DIN rail mounting, Function: Standard, Rated voltage: 12 V DC, Voltage range: 12 ... 15 V DC factory setting: 12 Vpa

	PS1000-A6-24.20 Power Supply
	100 V AC to 240 V AC wide-range input, Output 24 V DC, 20 A, 480 W, 1-phase, Housing width 48 mm, Efficiency up to 95.6 %, Minimal inrush current surge, DC OK relay contact, Current sharing for parallel use, Suitable for Zone 2/Div. 2 mounting, Device type: device for DIN rail mounting, Function: Standard, Rated voltage: 24 V DC, Voltage range: 24 ... 28 V DC factory setting: 24.1 Vpa

Allmänna kommentarer om produktinformationen från Pepperl+Fuchs

Länkar

Pepperl+Fuchs AB
Bultgatan 40 A
442 40 Kungälv
Sverige
orgnr. 556212-2126
info@se.pepperl-fuchs.com
phone +46 303 246070

Pepperl+Fuchs is a leading developer and manufacturer of electronic sensors and components for the global automation market. Continuous innovation, enduring quality, and steady growth have been the foundation of our success for more than 70 years. Pepperl+Fuchs employs 6,300 people worldwide and has manufacturing facilities in Germany, USA, Singapore, Hungary, Indonesia and Vietnam, most of them ISO 9001 certified.