Serviceline Industrial Sensors
Serviceline Explosion Protection
Inductive positioning system PMI15V-F112-EP-IO-V1
- IO-Link interface for service and process data
- Measuring range 0 ... 15 mm
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Ladda ned datablad som PDF::
Utdrag ur datablad: Tekniska data för PMI15V-F112-EP-IO-V1
| General specifications | ||
|---|---|---|
| Object distance | 0.5 ... 2 mm | |
| Measuring range | 0 ... 15 mm | |
| Nominal ratings | ||
| Operating voltage | 18 ... 30 V DC | |
| Reverse polarity protection | reverse polarity protected | |
| Linearity error | ± 0.3 mm | |
| Repeat accuracy | ± 0.5 mm | |
| Resolution | 10 µm | |
| Temperature drift | ± 0.4 mm in the range 0.5 mm ... 14.5 mm (for 1 mm object distance) |
|
| No-load supply current | ≤ 22 mA | |
| Functional safety related parameters | ||
| MTTFd | 830 a | |
| Mission Time (TM) | 20 a | |
| Diagnostic Coverage (DC) | 0 % | |
| Interface | ||
| Interface type | IO-Link (via C/Q = Pin 4) | |
| IO-Link revision | 1.1 | |
| Device profile | Identification and Diagnosis - I&D Smart Sensor - SSP 0 Smart Sensor - SSP 3.1 |
|
| Process data | Input 4 byte - Measurement value 16 bit - Scale 8 bit - Signal quality indicator 2 bit - Switching signal 1 1 bit - Switching signal 2 1 bit |
|
| Vendor ID | 1 (0x0001) | |
| Device ID | 2097413 (0x200105) | |
| Transfer rate | COM2 (38.4 kBit/s) | |
| Min. cycle time | 3 ms | |
| SIO mode support | yes | |
| Compatible master port type | Class A Class B |
|
| Switching output | ||
| Output type | 1 push-pull (4 in 1) output, short-circuit protected, reverse polarity protected, overvoltage protected | |
| Operating current | ≤ 100 mA / Output | |
| Voltage drop | ≤ 3 V | |
| Short-circuit protection | pulsing | |
| Compliance with standards and directives | ||
| Standard conformity | ||
| Standards | EN IEC 60947-5-2 | |
| Communication interface | IEC 61131-9 / IO-Link V1.1.3 | |
| Approvals and certificates | ||
| UL approval | cULus Listed, Class 2 Power Source, Type 1 enclosure | |
| Ambient conditions | ||
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) | |
| Mechanical specifications | ||
| Connection type | 5-pin, M12 x 1 connector | |
| Degree of protection | IP67 | |
| Material | ||
| Housing | Zinc diecast, nickel-plated cover PA Active surface PBT |
|
| Target | mild steel, e. g. 1.0037, SR235JR (formerly St37-2) | |
| Dimensions | ||
| Height | 30.5 mm | |
| Width | 35 mm | |
| Length | 35 mm | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27274004 |
| ECLASS 12.0 | 27274004 |
| ECLASS 11.0 | 27270702 |
| ECLASS 10.0.1 | 27270702 |
| ECLASS 9.0 | 27270702 |
| ECLASS 8.0 | 27270702 |
| ECLASS 5.1 | 27270702 |
| ETIM 9.0 | EC001852 |
| ETIM 8.0 | EC001852 |
| ETIM 7.0 | EC001852 |
| ETIM 6.0 | EC001852 |
| ETIM 5.0 | EC001852 |
| UNSPSC 12.1 | 39121550 |
Details: PMI15V-F112-EP-IO-V1
Informative Literature: PMI15V-F112-EP-IO-V1
| Literature | Language | File Type | File Size |
|---|---|---|---|
| Product Overview - Inductive Positioning Systems | ENG | 1289 KB |
Product Documentation: PMI15V-F112-EP-IO-V1
| Manuals | Language | File Type | File Size |
|---|---|---|---|
| Manual | ENG | 980 KB | |
| Parameter Information | |||
| IODD for PMI15V-F112-EP-IO / IODD für PMI15V-F112-EP-IO | ALL | 714 KB | |
Design / Simulation: PMI15V-F112-EP-IO-V1
| CAD | Language | File Type | File Size |
|---|---|---|---|
| CAD 3-D / CAD 3-D | ALL | STP | 255 KB |
| CAE | |||
| CAE EPLAN macro EDZ / CAE EPLAN Makro EDZ | ALL | EDZ | 182 KB |
Approvals: PMI15V-F112-EP-IO-V1
| Certificates | Cert No. | Language | File Type | File Size |
|---|---|---|---|---|
| Canada USA UL Ordinary Location | UL-CA-2133562-0 / UL-US-2140037-0 | ALL | 546 KB | |
| Declaration of Conformity | ||||
| EU Declaration of Conformity (P+F) | TDOC-7549_SWE | SWE | 1307 KB | |
| UK Declaration of Conformity (P+F) | TDOC-7550_ENG | ENG | 1284 KB | |
Software: PMI15V-F112-EP-IO-V1
| Device Description Files/Drivers | Release Info | File Type | File Size |
|---|---|---|---|
| IODD for PMI15V-F112-EP-IO / IODD für PMI15V-F112-EP-IO | V1.00.000 / 2023-11-01 | ZIP | 247 KB |
| Software Tools | |||
| IO-Link Offline Parameterization Tool / IO-Link Offline-Parametriertool | V1.00.006 / 2022-07-10 | ZIP | 96138 KB |
Pepperl+Fuchs AB
Bultgatan 40 A
442 40 Kungälv
Sverige
orgnr. 556212-2126
info@se.pepperl-fuchs.com
+46 303 246070
© 2024 All Rights Reserved.
Pepperl+Fuchs is a leading developer and manufacturer of electronic sensors and components for the global automation market. Continuous innovation, enduring quality, and steady growth have been the foundation of our success for more than 70 years. Pepperl+Fuchs employs 6,300 people worldwide and has manufacturing facilities in Germany, USA, Singapore, Hungary, Indonesia and Vietnam, most of them ISO 9001 certified.