Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Ladda ned datablad som PDF::
Utdrag ur datablad: Tekniska data för
DK10-LAS-54/76/110/124
| Product Description |
| Print mark contrast sensor, 10 m detection range, red laser light, laser class 2, light/dark on, sensitivity adjuster, push-pull output, M12 plug |
| General specifications |
| Effective detection range | 0 ... 10 m |
| Reflector distance | 0 ... 10 m |
| Threshold detection range | 12 m |
| Reference target | reflector C110-2 |
| Light source | laser diode |
| Light type | modulated visible red light |
| Laser nominal ratings | |
| Note | LASER LIGHT , DO NOT STARE INTO BEAM |
| Laser class | 2 |
| Wave length | 650 nm |
| Beam divergence | < 1.5 mrad |
| Pulse length | 1.5 µs |
| Repetition rate | 108.7 kHz |
| max. pulse energy | 2.1 nJ |
| Light spot representation | approx. 10 mm at a distance of 10 m |
| Ambient light limit | |
| Continuous light | 40000 Lux |
| Functional safety related parameters |
| MTTFd | 550 a |
| Mission Time (TM) | 20 a |
| Diagnostic Coverage (DC) | 60 % |
| Indicators/operating means |
| Function indicator | LED yellow: lights up if receiver is lit (light on), lights up if receiver is not lit (dark on) |
| Control elements | Light-on/dark-on changeover switch, sensitivity adjuster |
| Electrical specifications |
| Operating voltage | 10 ... 30 V DC |
| Ripple | 10 % |
| No-load supply current | ≤ 55 mA |
| Input |
| Test input | emitter deactivation with +Ub |
| Output |
| Switching type | light/dark on switchable |
| Signal output | Push-pull output, short-circuit protected, reverse polarity protected |
| Switching voltage | PNP: UB - 2.5 V / NPN: URest 1.5 V |
| Switching current | max. 200 mA |
| Switching frequency | 16.5 kHz |
| Response time | 30 µs |
| Conformity |
| Product standard | EN 60947-5-2 |
| Laser safety | IEC 60825-1:2007 |
| Compliance with standards and directives |
| Standard conformity | |
| Shock and impact resistance | IEC / EN 60068. half-sine, 40 g in each X, Y and Z directions |
| Vibration resistance | IEC / EN 60068-2-6. Sinus. 10 -150 Hz, 5 g in each X, Y and Z directions |
| Approvals and certificates |
| UL approval | cULus Listed , Class 2 power source |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Ambient conditions |
| Ambient temperature | -10 ... 50 °C (14 ... 122 °F) |
| Storage temperature | -20 ... 75 °C (-4 ... 167 °F) |
| Mechanical specifications |
| Degree of protection | IP67 |
| Connection | 5-pin, M12 x 1 connector |
| Material | |
| Housing | PC (glass-fiber-reinforced Makrolon) |
| Optical face | glass |
| Mass | 200 g |
| Dimensions | |
| Height | 85.6 mm |
| Width | 33 mm |
| Depth | 60.8 mm |
Classifications
| System | Classcode |
| ECLASS 13.0 | 27270906 |
| ECLASS 12.0 | 27270906 |
| ECLASS 11.0 | 27270906 |
| ECLASS 10.0.1 | 27270906 |
| ECLASS 9.0 | 27270906 |
| ECLASS 8.0 | 27270906 |
| ECLASS 5.1 | 27270906 |
| ETIM 9.0 | EC001820 |
| ETIM 8.0 | EC001820 |
| ETIM 7.0 | EC001820 |
| ETIM 6.0 | EC001820 |
| ETIM 5.0 | EC001820 |
| UNSPSC 12.1 | 39121528 |
Details:
DK10-LAS-54/76/110/124
Product Documentation:
DK10-LAS-54/76/110/124
Design / Simulation:
DK10-LAS-54/76/110/124
Approvals:
DK10-LAS-54/76/110/124
Associated Products:
DK10-LAS-54/76/110/124
| Accessories |
|
|
|
| Female cordset single-ended M12 straight A-coded, 5-pin, PVC cable greyfa |
|
|
|
|
| Female cordset single-ended M12 angled A-coded, 5-pin, PVC cable greyfa |
|
|
|
|
| Right-Angled Mounting Bracketfa |
|
|
|
|
| Flat Mounting Bracketfa |
|
+46 303 246070