Switch Amplifier HiC2853R1

1-channel isolated barrier
24 V DC supply (bus powered)
Input for approved dry contacts or SN/S1N sensors
Usable as signal splitter (1 input and 2 outputs)
Application-specific outputs
Active voltage output
Passive transistor output (resistive)
Line fault detection (LFD)
Line fault transparency (LFT)
Up to SIL 3 acc. to IEC/EN 61508

Technical Data
Product Documentation
Design / Simulation
Approvals

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Ladda ned datablad som PDF::

Utdrag ur datablad: Tekniska data för HiC2853R1

General specifications
Signal type		Digital Input
Functional safety related parameters
Safety Integrity Level (SIL)		SIL 3
Systematic capability (SC)		SC 3
Supply
Connection		SL1: 1a(-), 1b(-); 2a(+), 2b(+)
Rated voltage		19 ... 30 V DC bus powered via Termination Board
Ripple		≤ 10 %
Rated current		≤ 55 mA
Power dissipation		≤ 800 mW
Power consumption		≤ 1300 mW
Input
Connection side		field side
Connection		SL2: 5a(+), 5b(-)
Open circuit voltage/short-circuit current		approx. 8.4 V DC / approx. 11.9 mA
Switching point/switching hysteresis		2.1 ... 2.8 mA / approx. 0.3 mA
Line fault detection		breakage I ≤ 0.15 mA , short-circuit I ≥ 8.5 mA
Lead resistance		max. 50 Ω , consider capacitances and inductances
Switching point		1-signal: I > 2.8 mA 0-signal: I < 2.1 mA
Response delay		≤ 1 ms
Output
Connection side		control side
Connection		SL1: 8a(+), 7a(-); 10a(+), 9a(-)
Rated voltage		output I: 19 ... 30 V DC with external resistance > 2 kΩ, e. g. 16-channel ProSafe DI card SDV144 from Yokogawa
Output I		passive transistor output (resistive) 0-signal: 39 kΩ ± 5 % 1-signal: voltage drop 6.5 V ± 0.5 V fault: > 100 kΩ
Output II		active voltage output, short-circuit proof 0-signal: 0 V 1-signal: 20 ... 31 V DC at max. 15 mA fault: 0 V
Fault indication output
Connection		SL1: 6b
Output type		open collector transistor (internal fault bus)
Transfer characteristics
Switching frequency
	Output I	≤ 50 Hz
	Output II	≤ 50 Hz
Galvanic isolation
Output/power supply		functional insulation acc. to IEC 62103, rated insulation voltage 50 V_eff
Output/Output		functional insulation acc. to IEC 62103, rated insulation voltage 50 V_eff
Indicators/settings
Display elements		LEDs
Labeling		space for labeling at the front
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Conformity
Electromagnetic compatibility		EN IEC 61326-3-2:2018 , NE 21:2017 For further information see system description.
Degree of protection		IEC 60529:2001
Ambient conditions
Ambient temperature		-20 ... 60 °C (-4 ... 140 °F)
Mechanical specifications
Degree of protection		IP20
Mass		approx. 105 g
Dimensions		12.5 x 106 x 128 mm (0.5 x 4.2 x 5.1 inch) (W x H x D)
	Height	106 mm
	Width	12.5 mm
	Depth	128 mm
Mounting		on termination board
Coding		pin 1 and 2 trimmed For further information see system description.
Data for application in connection with hazardous areas
EU-type examination certificate		BASEEFA 07 ATEX 0302X
	Marking	II (1)G [Ex ia] IIC , II (1) D [Ex ia] IIIC , I (M1) [Ex ia] I
	Input	Ex ia
	Voltage	10.5 V
	Current	17.1 mA
	Power	45 mW (linear characteristic)
Supply
	Maximum safe voltage	253 V AC (Attention! U_m is no rated voltage.)
Output
	Maximum safe voltage	253 V AC (Attention! U_m is no rated voltage.)
Certificate		PF 09 CERT 1440 X
	Marking	II 3G Ex nA IIC T4 Gc
Galvanic isolation
	Input/Output	safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
	Input/power supply	safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
Directive conformity
	Directive 2014/34/EU	EN IEC 60079-0:2018+AC:2020 , EN 60079-11:2012 , EN 60079-15:2010
International approvals
UL approval		E106378
	Control drawing	116-0364
IECEx approval
	IECEx certificate	IECEx BAS 07.0097X
	IECEx marking	[Ex ia Ga] IIC, [Ex ia] IIIC , [Ex ia] I
General information
Supplementary information		Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

Classifications

System	Classcode
ECLASS 13.0	27210121
ECLASS 12.0	27210121
ECLASS 11.0	27210121
ECLASS 10.0.1	27210121
ECLASS 9.0	27210121
ECLASS 8.0	27210121
ECLASS 5.1	27210121
ETIM 9.0	EC001485
ETIM 8.0	EC001485
ETIM 7.0	EC001485
ETIM 6.0	EC001485
ETIM 5.0	EC001485
UNSPSC 12.1	32101514

Details: HiC2853R1

Product Documentation: HiC2853R1

Safety and Security Documentation	Language	File Type	File Size
Manual	SWE	PDF	161 KB
Functional Safety Manual	ENG	PDF	1966 KB
Manuals
System Manual	ENG	PDF	5438 KB

Design / Simulation: HiC2853R1

CAD	Language	File Type	File Size
CAD 3-D / CAD 3-D	ALL	STP	2770 KB
CAD Portal / CAD Portal	ALL	LINK	---
CAE
EPLAN macros H-System devices (EMA) / EPLAN-Makros Geräte H-System (EMA)	ALL	ZIP	3536 KB

Approvals: HiC2853R1

Certificates	Cert No.	Language	File Type	File Size
Baseefa IECEx Certificate of Conformity	IECEx BAS 07.0097X	ALL	LINK	---
China SITIIAS CCC Ex Certificate	2021322316004125 (Singapore)	ALL	PDF	988 KB
Europe Baseefa ATEX Category (M1) ATEX Category (1) GD	Baseefa 07 ATEX 0302X	ALL	PDF	1615 KB
Europe Pepperl+Fuchs ATEX Category 3 G Certificate	PF 09 CERT 1440 X	ALL	PDF	208 KB
South Africa MASC	MASC MS/17-0853X	ALL	PDF	762 KB
USA Canada UL Hazardous Location Certificate of Compliance cULus UL E106378	CoC 20130429 - E106378 RepRef 20130429	ALL	PDF	425 KB
United Arab Emirates SGS Gulf Limited ECASEx	24-02-101831/E24-02-105329/NB0002	ALL	PDF	603 KB
Worldwide exida Functional Safety Assessment	P+F 1406-079-C R035 V2R1	ALL	PDF	408 KB
Worldwide exida Functional Safety Certificate	Cert P+F 1406079 P0006 C014 V3R1	ALL	PDF	121 KB
Control Drawings
Control drawing UL / Control drawing UL		ALL	PDF	154 KB
Declaration of Conformity
EU Declaration of Conformity (P+F)	TDOC-0034FSWE	SWE	PDF	180 KB

Allmänna kommentarer om produktinformationen från Pepperl+Fuchs

Länkar

Selector for Safety Products

Choose from various selection criteria like safety integrity level, performance level, device function, and signal type and find the SIL/PL assessed device that you are looking for.

Pepperl+Fuchs AB
Bultgatan 40 A
442 40 Kungälv
Sverige
orgnr. 556212-2126
info@se.pepperl-fuchs.com
phone +46 303 246070

Pepperl+Fuchs is a leading developer and manufacturer of electronic sensors and components for the global automation market. Continuous innovation, enduring quality, and steady growth have been the foundation of our success for more than 70 years. Pepperl+Fuchs employs 6,300 people worldwide and has manufacturing facilities in Germany, USA, Singapore, Hungary, Indonesia and Vietnam, most of them ISO 9001 certified.