Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Ladda ned datablad som PDF::
Utdrag ur datablad: Tekniska data för
VLD700-F280-2E2-1000
| Product Description |
| Laser light sensor for field monitoring; Resolution: 752 x 480 pixel; Measuring range: X = 40 ... 310 mm, Z = 60 ... 700 mm; Scan rate: 30 s-1; 2 digital outputs; RS-485 interface |
| General specifications |
| Measuring range | X = 40 ... 310 mm ; Z = 60 ... 700 mm |
| Light source | laser diode |
| Light type | red laser + Integrated LED lightning red 650 nm |
| Laser nominal ratings | |
| Note | VISIBLE LASER RADIATION , DO NOT STARE INTO BEAM
DO NOT VIEW DIRECTLY WITH OPTICAL INSTRUMENTS |
| Laser class | 1 |
| Wave length | Measuring laser: 660 nm |
| Pulse length | Measuring laser: 2 ms |
| Maximum optical power output | Measuring laser: 15 mW |
| Laser monitoring | The safety system switches off the laser when the laser current is too high |
| Object size | > 0.1 mm at min. read distance |
| Scan rate | 30 s-1 |
| Functional safety related parameters |
| MTTFd | 20 a |
| Mission Time (TM) | 10 a |
| Diagnostic Coverage (DC) | 0 % |
| Indicators/operating means |
| Operation indicator | LED green |
| Diagnostics indicator | LED yellow / red |
| Function indicator | Trigger: LED yellow ; object in evaluation range : LED red / green |
| Control elements | 2 push-buttons |
| Electrical specifications |
| Operating voltage | 24 V ± 20 % , PELV |
| No-load supply current | max. 250 mA |
| Power consumption | max. 6 W , Outputs without load |
| Interface |
| Interface type | RS 485 interface |
| Physical | Switchable terminal resistor |
| Protocol | binary code |
| Transfer rate | 38400 ... 230400 Bit/s |
| Input |
| Input voltage | 24 V |
| Number/Type | External triggering + 1 Input |
| Switching threshold | low: < 2.5 V, high: > 8 V |
| Output |
| Number/Type | 2 digital outputs |
| Switching type | PNP |
| Switching voltage | 24 V |
| Switching current | 150 mA each output |
| Compliance with standards and directives |
| Standard conformity | |
| Noise immunity | EN 61000-6-2:2005 |
| Emitted interference | EN 61000-6-4:2007/A1:2011 |
| Degree of protection | EN 60529 |
| Shock and impact resistance | EN 60068-2-27:2009 |
| Laser class | IEC 60825-1:2007 |
| Approvals and certificates |
| UL approval | cULus Listed, Type 1 enclosure |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Approvals | CE |
| Ambient conditions |
| Operating temperature | -20 ... 45 °C (-4 ... 113 °F) , (noncondensing; prevent icing on the lens!) |
| Storage temperature | -20 ... 70 °C (-4 ... 158 °F) |
| Mechanical specifications |
| Degree of protection | IP67 |
| Connection | 8-pin, M12 x 1 connector ( supply + RS485 + Inputs/Outputs ) ; can be rotated 90° ; Grounding : Grounding clip for PCV system |
| Material | |
| Housing | PC/ABS |
| Optical face | Plastic pane |
| Mass | approx. 125 g |
| Tightening torque, fastening screws | max. 2 Nm |
| Dimensions | |
| Height | 85 mm |
| Width | 38 mm |
| Depth | 55 mm |
| General information |
| Note | Security Instructions:
- Read the operating instructions before attempting commissioning
- Installation, connection and adjustments should only be undertaken by specialist personnel
- Not a safety component in accordance with the EU Machinery Directive |
Classifications
| System | Classcode |
| ECLASS 13.0 | 27270916 |
| ECLASS 12.0 | 27270916 |
| ECLASS 11.0 | 27270801 |
| ECLASS 10.0.1 | 27270801 |
| ECLASS 9.0 | 27270801 |
| ECLASS 8.0 | 27270801 |
| ECLASS 5.1 | 27270801 |
| ETIM 9.0 | EC001825 |
| ETIM 8.0 | EC001825 |
| ETIM 7.0 | EC001825 |
| ETIM 6.0 | EC001825 |
| ETIM 5.0 | EC001825 |
| UNSPSC 12.1 | 41111613 |
Details:
VLD700-F280-2E2-1000
Product Documentation:
VLD700-F280-2E2-1000
Design / Simulation:
VLD700-F280-2E2-1000
Approvals:
VLD700-F280-2E2-1000
Software:
VLD700-F280-2E2-1000
Associated Products:
VLD700-F280-2E2-1000
| Accessories |
|
|
|
| Female cordset single-ended M12 straight A-coded, 8-pin, PUR cable grey, shieldedfa |
|
|
|
|
| Mounting bracket fa |
|
|
|
|
| Mounting bracket fa |
|
|
|
|
| USB to RS 485 interface converter, Extension cable 0.8 m in scope of delivery, Power supply for 95 - 230 V AC, For RS485fa |
|
|
|
|
| Interface module with PROFIBUS interface for SmartRunner, Up to 4 sensors can be connected, DIN rail mounting, PROFIBUS interfacefa |
|
|
|
|
| Interface module with PROFINET interface for SmartRunner, Up to 4 sensors can be connected, DIN rail mounting, Ethernet interface with PROFINET, Integrated switchfa |
|
|
|
|
| Interface module with EtherCAT interface for SmartRunner, Up to 4 read heads can be connected, DIN rail mounting, EtherCAT interface, Integrated switchfa |
|
|
|
|
| Interface module with EtherNet/IP interface for SmartRunner, Up to 4 read heads can be connected, DIN rail mounting, EtherNet/IP, Integrated switchfa |
|
|
|
|
| Weld slag cover model, Enclosure for SmartRunner, Protection from welding beads, Simple and fast mountingfa |
|
|
|
|
| Replacement glass for SmartRunner protective housing, Protection from welding beads, Simple and fast mountingfa |
|
+46 303 246070