Safety thru-beam sensor SLA12/124

Sensing range up to 10 m
Self-monitoring (type 4 according to IEC/EN 61496-1)
Red transmission light
Integrated alignment aid
Clearly visible LED functional display and pre-fault indicator on the receiver
Sturdy housing
Waterproof, degree of protection IP67
Operation on control units of SB4 (SafeBox)

Technical Data
Product Documentation
Design / Simulation
Approvals
Software
Associated Products

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Ladda ned datablad som PDF::

Utdrag ur datablad: Tekniska data för SLA12/124

System components
Emitter		SLA12-T/124
Receiver		SLA12-R/124
General specifications
Effective detection range		0.2 ... 10 m
Threshold detection range		16 m
Light source		LED, 660 nm
Light type		modulated visible red light
Target size		static: 10 mm dynamic: 30 mm (at v = 1.6 m/s of the obstacle)
Alignment aid		LED red
Opening angle		< 5 °
Functional safety related parameters
Safety Integrity Level (SIL)		SIL 3
Performance level (PL)		PL e
Category		Cat. 4
Mission Time (T_M)		20 a
PFH_d		4.4 E-10
Type		4
Indicators/operating means
Operation indicator		LED green
Function indicator		LED yellow: 1. LED lit constantly: signal > 2 x switching point (operating reserve) 2. LED flashes: signal between 1 x switching point and 2 x switching point 3. LED off: signal < switching point
Electrical specifications
Operating voltage		Power supply via control unit
Protection class		III , IEC 61140
Conformity
Functional safety		ISO 13849-1
Product standard		EN 61496-1 ; IEC 61496-2
Approvals and certificates
CE conformity		CE
UKCA conformity		UKCA
UL approval		cULus Listed
TÜV approval		TÜV SÜD
Ambient conditions
Ambient temperature		-20 ... 60 °C (-4 ... 140 °F)
Storage temperature		-20 ... 70 °C (-4 ... 158 °F)
Relative humidity		max. 95 %, not condensing
Shock resistance		10 g , 16 ms ; stationary applications only
Vibration resistance		1 mm , 10 ... 55 Hz ; stationary applications only
Mechanical specifications
Degree of protection		IP67 according to EN 60529
Connection		5-pin M12 x 1 connector with metal thread, 90° rotatable
Material
	Housing	Frame: nickel plated, die cast zinc, Laterals: glass-fiber reinforced plastic PC RAL 1021 (yellow)
	Optical face	Plastic pane
Mass		per device 60 g
Dimensions
	Height	49 mm
	Width	41.5 mm
	Depth	15 mm

Classifications

System	Classcode
ECLASS 13.0	27272701
ECLASS 12.0	27272701
ECLASS 11.0	27272701
ECLASS 10.0.1	27272701
ECLASS 9.0	27272701
ECLASS 8.0	27272701
ECLASS 5.1	27272701
ETIM 9.0	EC002716
ETIM 8.0	EC002716
ETIM 7.0	EC002716
ETIM 6.0	EC002716
ETIM 5.0	EC002716
UNSPSC 12.1	46171620

Details: SLA12/124

Product Documentation: SLA12/124

Brief Instructions	Language	File Type	File Size
Instruction leaflet / Beipackzettel	ALL	PDF	644 KB

Design / Simulation: SLA12/124

CAD	Language	File Type	File Size
CAD 3-D / CAD 3-D	ALL	STP	204 KB
CAD Portal / CAD Portal	ALL	LINK	---

Approvals: SLA12/124

Certificates	Cert No.	Language	File Type	File Size
/cert/cert1312d.pdf	Z10 020068 0099	ALL	PDF	365 KB
/cert/cert4281a.pdf	UL-CA-L215245-21-10607002-2 / UL-US-L215245-11-10607002-3	ALL	PDF	570 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)	DOC-2144C	ALL	PDF	484 KB
UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F)	DOC-7145	ALL	PDF	441 KB

Software: SLA12/124

Software Tools	Release Info	File Type	File Size
SISTEMA Library Sensors / SISTEMA-Bibliothek Sensoren		ZIP	131 KB

Associated Products: SLA12/124

Matching System Components

	SB4-OR-4CP Safety control unit
	Evaluation device for safety thru-beam sensors SLA12 and SLA29 and for 2 channel safety devices (emergency off), 4 sensor channels, Self-monitoring (type 4 according to IEC/EN 61496-1), Operating mode can be selected by means of DIP switches, Start/Restart disable , Relay monitor, Stability alarm indication, Clearly visible LED functional display, Safety Integrity Level (SIL): SIL 3, Performance level (PL): PL e, Category: Cat. 4, Operating voltage: 24 V DC, ± 20 %fa

	SB4-OR-4CP-B Safety control unit
	Evaluation device for safety thru-beam sensors SLA12 and SLA29 and for 2 channel safety devices (emergency off), Expansion slots for SB4 modules for optional enhanced functionality, Self-monitoring (type 4 according to IEC/EN 61496-1), Operating mode can be selected by means of DIP switches, 7-segment diagnostic display, Safety outputs OSSD, external status displays OSSD, Safety Integrity Level (SIL): SIL 3, Performance level (PL): PL e, Category: Cat. 4, Operating voltage: 24 V DC, ± 20 %fa

	SB4-OR-4CP-B-B Safety control unit
	Evaluation device for safety thru-beam sensors SLA12 and SLA29 and for 2 channel safety devices (emergency off), Expansion slots for SB4 modules for optional enhanced functionality, Self-monitoring (type 4 according to IEC/EN 61496-1), Operating mode can be selected by means of DIP switches, 7-segment diagnostic display, Safety outputs OSSD, external status displays OSSD, Safety Integrity Level (SIL): SIL 3, Performance level (PL): PL e, Category: Cat. 4, Operating voltage: 24 V DC, ± 20 %fa

	SB4-OR-4CP-B-B-B Safety control unit
	Evaluation device for safety thru-beam sensors SLA12 and SLA29 and for 2 channel safety devices (emergency off), Expansion slots for SB4 modules for optional enhanced functionality, Self-monitoring (type 4 according to IEC/EN 61496-1), Operating mode can be selected by means of DIP switches, 7-segment diagnostic display, Safety outputs OSSD, external status displays OSSD, Safety Integrity Level (SIL): SIL 3, Performance level (PL): PL e, Category: Cat. 4, Operating voltage: 24 V DC, ± 20 %fa

	SB4-OR-4CP-B-B-B-B Safety control unit
	Evaluation device for safety thru-beam sensors SLA12 and SLA29 and for 2 channel safety devices (emergency off), Expansion slots for SB4 modules for optional enhanced functionality, Self-monitoring (type 4 according to IEC/EN 61496-1), Operating mode can be selected by means of DIP switches, 7-segment diagnostic display, Safety outputs OSSD, external status displays OSSD, Safety Integrity Level (SIL): SIL 3, Performance level (PL): PL e, Category: Cat. 4, Operating voltage: 24 V DC, ± 20 %fa

	SB4-OR-4CP-B-B-B-B-B-B Safety control unit
	Evaluation device for safety thru-beam sensors SLA12 and SLA29 and for 2 channel safety devices (emergency off), Expansion slots for SB4 modules for optional enhanced functionality, Self-monitoring (type 4 according to IEC/EN 61496-1), Operating mode can be selected by means of DIP switches, 7-segment diagnostic display, Safety outputs OSSD, external status displays OSSD, Safety Integrity Level (SIL): SIL 3, Performance level (PL): PL e, Category: Cat. 4, Operating voltage: 24 V DC, ± 20 %fa

	SB4-OR-4CP-4C Safety control unit
	Evaluation device for safety thru-beam sensors SLA12 and SLA29 and for 2 channel safety devices (emergency off), 8 sensor channels, Self-monitoring (type 4 according to IEC/EN 61496-1), Operating mode can be selected by means of DIP switches, Start/Restart disable , Relay monitor, Stability alarm indication, Clearly visible LED functional display, Safety Integrity Level (SIL): SIL 3, Performance level (PL): PL e, Category: Cat. 4, Operating voltage: 24 V DC, ± 20 %fa

	SB4-OR-4CP-4M Safety control unit
	Evaluation device for safety thru-beam sensors SLA12 and SLA29 and for 2 channel safety devices (emergency off), 4 sensor channels, Self-monitoring (type 4 according to IEC/EN 61496-1), Operating mode can be selected by means of DIP switches, Start/Restart disable , Relay monitor, Sequential and parallel muting in various operating modes, Double muting, Safety Integrity Level (SIL): SIL 3, Performance level (PL): PL e, Category: Cat. 4, Operating voltage: 24 V DC, ± 20 %fa

Accessories

	SLA-1-M Deviation mirror
	Deflecting mirror for single-beam deflection of the protection beam of safety light beams in the SL and SLA series, Safety Series: SLAfa

	OMH-06 Mounting aid
	Mounting aid for round steel ø 12 mm or sheet 1.5 mm ... 3 mmfa

	OMH-MLV12-HWG Mounting aid
	Mounting bracket for series MLV12 sensorsfa

	OMH-MLV12-HWK Mounting aid
	Mounting bracket for series MLV12 sensorsfa

	OMH-K01 Mounting aid
	dove tail mounting clampfa

	OMH-K02 Mounting aid
	dove tail mounting clampfa

Allmänna kommentarer om produktinformationen från Pepperl+Fuchs

Funktionssäkerhetsnav från Pepperl+Fuchs

Besök funktionssäkerhetsnavet

Här hittar du flera hundra produkter med SIL/PL-bedömning, kostnadsfria verktyg och broschyrer: funktionssäkerhetsnavet är utgångspunkten när du behöver implementera säkerhetsfunktioner.

Pepperl+Fuchs AB
Bultgatan 40 A
442 40 Kungälv
Sverige
orgnr. 556212-2126
info@se.pepperl-fuchs.com
phone +46 303 246070

Pepperl+Fuchs is a leading developer and manufacturer of electronic sensors and components for the global automation market. Continuous innovation, enduring quality, and steady growth have been the foundation of our success for more than 70 years. Pepperl+Fuchs employs 6,300 people worldwide and has manufacturing facilities in Germany, USA, Singapore, Hungary, Indonesia and Vietnam, most of them ISO 9001 certified.