Inductive sensor NMB3-8GM50-E2-V3

3 mm flush
Stainless steel sensing face
Increased operating distance

Technical Data
Product Documentation
Design / Simulation
Approvals
Associated Products

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Ladda ned datablad som PDF::

Utdrag ur datablad: Tekniska data för NMB3-8GM50-E2-V3

General specifications
Switching function		Normally open (NO)
Output type		PNP
Rated operating distance		3 mm
Installation		flush
Output polarity		DC
Assured operating distance		0 ... 2.43 mm
Reduction factor r_Al		0.3
Reduction factor r_Cu		0.2
Reduction factor r₃₀₄		0.7
Output type		3-wire
Nominal ratings
Operating voltage		10 ... 30 V DC
Switching frequency		0 ... 360 Hz
Hysteresis		5 ... 15 typ. 10 %
Reverse polarity protection		reverse polarity protected
Short-circuit protection		pulsing
Voltage drop		≤ 2 V
Operating current		0 ... 100 mA
Off-state current		0 ... 10 µA typ. 0.1 µA at 25 °C
No-load supply current		≤ 10 mA
Switching state indicator		LED, red
Functional safety related parameters
MTTF_d		2000 a
Mission Time (T_M)		20 a
Diagnostic Coverage (DC)		0 %
Standard conformity
Standards		EN 60947-5-2:2007 IEC 60947-5-2:2007
Approvals and certificates
UL approval		cULus Listed, General Purpose
CCC approval		CCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature		-25 ... 75 °C (-13 ... 167 °F)
Mechanical specifications
Connection type		Connector plug M8 x 1 , 3-pin
Housing material		Stainless steel 1.4305 / AISI 303
Sensing face		Stainless steel 1.4305 / AISI 303
Degree of protection		IP67
Dimensions
	Length	50 mm
	Diameter	8 mm

Classifications

System	Classcode
ECLASS 13.0	27274001
ECLASS 12.0	27274001
ECLASS 11.0	27270101
ECLASS 10.0.1	27270101
ECLASS 9.0	27270101
ECLASS 8.0	27270101
ECLASS 5.1	27270101
ETIM 9.0	EC002714
ETIM 8.0	EC002714
ETIM 7.0	EC002714
ETIM 6.0	EC002714
ETIM 5.0	EC002714
UNSPSC 12.1	39121550

Details: NMB3-8GM50-E2-V3

Product Documentation: NMB3-8GM50-E2-V3

Product information	Language	File Type	File Size
Installation conditions	ENG	PDF	1054 KB

Design / Simulation: NMB3-8GM50-E2-V3

CAD	Language	File Type	File Size
CAD 3-D / CAD 3-D	ALL	STP	25 KB
CAD Portal / CAD Portal	ALL	LINK	---
CAE
CAE EPLAN Data Portal / CAE EPLAN Data Portal	ALL	LINK	---
EPLAN macro EDZ / EPLAN Makro EDZ	ALL	EDZ	62 KB

Approvals: NMB3-8GM50-E2-V3

Certificates	Cert No.	Language	File Type	File Size
Canada USA UL Ordinary Location	UL-US-L87056-11-41301991-3 / UL-CA-L87056-31-41301991-3	ALL	PDF	1806 KB
China Information on CCC	CCC-Exempt Declaration (Pepperl+Fuchs)	ALL	PDF	457 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)	DOC-3030B	ALL	PDF	1256 KB
UK Declaration of Conformity (P+F)	TDOC-6090_ENG	ENG	PDF	1223 KB

Associated Products: NMB3-8GM50-E2-V3

Accessories

	V3-WM-2M-PUR Female cordset
	Female cordset single-ended M8 angled A-coded, 3-pin, PUR cable greyfa

Allmänna kommentarer om produktinformationen från Pepperl+Fuchs

Pepperl+Fuchs AB
Bultgatan 40 A
442 40 Kungälv
Sverige
orgnr. 556212-2126
info@se.pepperl-fuchs.com
phone +46 303 246070

Pepperl+Fuchs is a leading developer and manufacturer of electronic sensors and components for the global automation market. Continuous innovation, enduring quality, and steady growth have been the foundation of our success for more than 70 years. Pepperl+Fuchs employs 6,300 people worldwide and has manufacturing facilities in Germany, USA, Singapore, Hungary, Indonesia and Vietnam, most of them ISO 9001 certified.