Vision Sensor VOS2000-F226-C-I
- Reads all standard 1-D and 2-D codes
- Reads DPM codes
- Multi code reading
- Output string formatting
- Code quality output
- 32 Jobs on-board can be saved
- Offline parameterization
- 1.2 megapixel resolution
- Exchangeable lens (C-Mount)
- Mechanical focus adjustment
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Download the complete datasheet as a PDF:
Datasheet excerpt: Technical data of VOS2000-F226-C-I
| Product Description |
|---|
| Vision sensor for 1-D and 2-D code reading; Resolution: 1280 x 960 pixels; Light source: external illumination; Lens: C-mount connection |
| General specifications | ||
|---|---|---|
| Sensing range | 1-D barcode: 225 mm x 169 mm with min. line width of 0.3 mm (reading distance depends on lens) 2-D barcode: 166 mm x 125 mm with min. module size of 0.3 mm (reading distance depends on lens) 1-D barcode: 376 mm x 282 mm with min. line width of 0.5 mm (reading distance depends on lens) 2-D barcode: 278 mm x 208 mm with min. module size of 0.5 mm (reading distance depends on lens) |
|
| Light source | External lighting | |
| Picture detail | dependant of operating distance | |
| Readable codes | 1-D Codes: Code 128, Code 39, Int 2 of 5, Codabar, UPC-A/E, EAN-8/13, Code 11, Code 32, Plessey, MSI Plessey, Telepen, BC 412, Pharmacode, DataBar, Postcode, Trioptic
2-D Codes: Data Matrix, QR-Code, Micro QR-Code, PDF417, Micro PDF417, Aztec, Han Xin Code, Maxi Code, Grid Matrix, Dotcode |
|
| Trigger mode | Free-running or triggered externally | |
| Depth of focus | ± 5 % of the operating distance | |
| Evaluation frequency | 30 Hz | |
| Target velocity | max. 4 m/s | |
| Resolution | 1280 x 960 pixels | |
| Image sensor | 1/3" CMOS monochrom Global Shutter 3.75 µm pixel size |
|
| Parameterization/software | ||
| Parameter assignment | Parameterization via PC user interface VCT Tool | |
| Evaluation procedure | ||
| Identification and Verification | 1-D and 2-D codes | |
| Indicators/operating means | ||
| LED 1 | Steady blue: sensor started, not set up Steady green: job loaded, ready for execution Flashing green: job loaded and being executed, capture in progress Steady red: sensor fault |
|
| LED 2 | Flashing blue: starting (duration approx. 20 seconds) Steady green: measurement successful (Pass) Steady blue: measurement borderline (Recycle) Steady red: measurement unsuccessful (Fail) |
|
| LED 3 | Steady blue: warm reset or restart Steady red/green/yellow: network activity |
|
| Electrical specifications | ||
| Operating voltage | 12 ... 30 V DC | |
| No-load supply current | 300 mA | |
| Interface 1 | ||
| Interface type | Ethernet | |
| Protocol | PROFINET IO TCP/IP EtherNet/IP |
|
| Transfer rate | 100 MBit/s | |
| Interface 2 | ||
| Interface type | RS-232 , serial | |
| Transfer rate | 115.2 kBit/s | |
| Input | ||
| Input type | optically decoupled Inputs | |
| Input voltage | Logic low (OFF): 0 ... 3 V Logic high (ON): 11 ... 30 V Switching threshold: 12 V |
|
| Control input | Image capture trigger + 2 general purpose inputs 2 inputs can be used for job switching |
|
| Input current | 8 mA ( typical ) | |
| Internal protection circuit | 3 kΩ / 4000 V ( rms ) | |
| Switching delay | Switch-on time (ON): 20 µs Switch-off time (OFF): 10 µs Image capture trigger: 62 µs (until image capture is triggered) |
|
| Output | ||
| Output type | 3 general purpose outputs , freely programmable , optically decoupled | |
| Switching voltage | max. 30 V | |
| Switching current | max. 100 mA each output | |
| Switching delay | Switch-on time (ON): 150 µs Switch-off time (OFF): 50 µs |
|
| Standard conformity | ||
| Emitted interference | EN 61000-6-4:2007+A1:2011 | |
| Noise immunity | EN 61000-6-2:2005 | |
| Approvals and certificates | ||
| Approvals | CE | |
| Ambient conditions | ||
| Ambient temperature | 0 ... 50 °C (32 ... 122 °F) | |
| Storage temperature | -20 ... 60 °C (-4 ... 140 °F) | |
| Mechanical specifications | ||
| Degree of protection | IP67 (with mounted lens protection cover) | |
| Connection | 8-pin M12 socket A-coded ; 12-pin M12 socket | |
| Material | ||
| Housing | anodized aluminum , plastic | |
| Installation | Mounting bracket | |
| Mass | approx. 200 g | |
| Objective connection | C-mount connection for external lens with different focal lengths | |
| Dimensions | ||
| Height | 57 mm | |
| Width | 58 mm | |
| Length | 61 mm | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27310101 |
| ECLASS 12.0 | 27310101 |
| ECLASS 11.0 | 27310101 |
| ECLASS 10.0.1 | 27310101 |
| ECLASS 9.0 | 27310101 |
| ECLASS 8.0 | 27310101 |
| ECLASS 5.1 | 27310101 |
| ETIM 9.0 | EC002999 |
| ETIM 8.0 | EC002999 |
| ETIM 7.0 | EC002999 |
| ETIM 6.0 | EC002999 |
| ETIM 5.0 | EC002999 |
| UNSPSC 12.1 | 43211711 |
Details: VOS2000-F226-C-I
Informative Literature: VOS2000-F226-C-I
Product Documentation: VOS2000-F226-C-I
| Manuals | Language | File Type | File Size |
|---|---|---|---|
| Manual | ENG | 11739 KB |
Design / Simulation: VOS2000-F226-C-I
| CAD | Language | File Type | File Size |
|---|---|---|---|
| CAD 3-D / CAD 3-D | ALL | STP | 1791 KB |
| CAD Portal / CAD Portal | ALL | LINK | --- |
Approvals: VOS2000-F226-C-I
| Declaration of Conformity | Cert No. | Language | File Type | File Size |
|---|---|---|---|---|
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-4653A | ALL | 138 KB | |
| UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F) | DOC-6801 | ALL | 134 KB |
Software: VOS2000-F226-C-I
| Device Description Files/Drivers | Release Info | File Type | File Size |
|---|---|---|---|
| EDS / EDS | ZIP | 2 KB | |
| GSDML / GSDML | ZIP | 6 KB | |
| Software Tools | |||
| Configuration Software VCT for VOS Vision Cameras / Konfigurations Software VCT für VOS Vision Kameras | ZIP | 25374 KB | |
Associated Products: VOS2000-F226-C-I
| Accessories | ||||||
|---|---|---|---|---|---|---|
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
From 2-D code readers and handhelds to barcode scanners and special solutions—find the ideal solution for your optical identification task.
Pepperl+Fuchs (Aust) Pty Ltd
131-149 Link Drive
Campbellfield, Victoria
Melbourne, Victoria 3061
Australia
sales@au.pepperl-fuchs.com
+61 3 9358 3400
© 2024 All Rights Reserved.
Pepperl+Fuchs is a leading developer and manufacturer of electronic sensors and components for the global automation market. Continuous innovation, enduring quality, and steady growth have been the foundation of our success for more than 70 years. Pepperl+Fuchs employs 6,300 people worldwide and has manufacturing facilities in Germany, USA, Singapore, Hungary, Indonesia and Vietnam, most of them ISO 9001 certified.