OBP120-R100-EP-IO-V3-L Trigger marks sensor

Key Benefits at a Glance

Miniature design with versatile mounting options
For detecting black trigger marks on a white background
DuraBeam Laser Sensors - durable and employable like an LED
Extended temperature range
-40 °C ... 60 °C
High degree of protection IP69K
IO-Link interface for service and process data

Please contact us for exact delivery estimation.7 069,00 CZK

Product photo: Trigger marks sensor OBP120-R100-EP-IO-V3-L

Dimensions: Trigger marks sensor OBP120-R100-EP-IO-V3-L

Connection Assignment: Trigger marks sensor OBP120-R100-EP-IO-V3-L

Note

All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Datasheet Function Classification Informative Literature Product Documentation Design / Simulation Approvals Software Related Products

Technical data of OBP120-R100-EP-IO-V3-L

Laser trigger marks sensor

Detection range

25 ... 120 mm

Adjustment range

25 ... 120 mm

Reference target

standard white, 100 mm x 100 mm

Light source

laser diode

Light type

modulated visible red light

Laser nominal ratings

Note		LASER LIGHT , DO NOT STARE INTO BEAM
Laser class		1
Wave length		680 nm
Beam divergence		> 5 mrad d63 < 1 mm in the range of 50 mm ... 250 mm
Pulse length		1.6 µs
Repetition rate		approx. 28.5 kHz
max. pulse energy		10.4 nJ

Optical resolution

Trigger mark [black, 6%] of 1 mm-wide on a white background [white, 90%]; Contrast difference of min. 50%

Diameter of the light spot

< 1 mm at a distance of 60 mm

Opening angle

approx. 0.3 °

Ambient light limit

EN 60947-5-2 : 40000 Lux

Teach-in

static and dynamic Teach-In

MTTF_d		560 a
Mission Time (T_M)		20 a
Diagnostic Coverage (DC)		0 %

Operation indicator		LED green: constantly on - power on flashing (4Hz) - short circuit flashing with short break (1 Hz) - IO-Link mode
Function indicator		LED yellow: constantly on - object detected constantly off - object not detected
Control elements		Teach-In key
Control elements		5-step rotary switch for operating modes selection

Rated operating voltage	U_e	10 ... 30 V DC
Ripple		max. 10 %
No-load supply current	I₀	< 20 mA at 24 V supply voltage
Protection class		III

Interface type		IO-Link ( via C/Q = pin 4 )
IO-Link revision		1.1
Device profile		Smart Sensor
Device ID		0x110C01 (1117185)
Transfer rate		COM2 (38.4 kBit/s)
Min. cycle time		2.3 ms
Process data width		Process data input 1 Bit Process data output 2 Bit
SIO mode support		yes
Compatible master port type		A

Switching type		The switching type of the sensor is adjustable. The default setting is: C/Q - Pin4: NPN normally open / light-on, PNP normally closed / dark-on, IO-Link
Signal output		1 push-pull (4 in 1) output, short-circuit protected, reverse polarity protected, overvoltage protected
Switching voltage		max. 30 V DC
Switching current		max. 100 mA , resistive load
Usage category		DC-12 and DC-13
Voltage drop	U_d	≤ 1.5 V DC
Switching frequency	f	3300 Hz
Response time		125 µs

Communication interface		IEC 61131-9
Product standard		EN 60947-5-2
Laser safety		EN 60825-1:2014

Protection class

Rated insulation voltage	U_i	30 V
Rated impulse withstand voltage	U_imp	800 V

UL approval

E87056 , cULus Listed , class 2 power supply , type rating 1

FDA approval

IEC 60825-1:2014 Complies with 21 CFR 1040.10 and 1040.11 except for conformance with IEC 60825-1 Ed. 3 as described in Laser Notice 56, dated May 8, 2019.

Ambient temperature		-40 ... 60 °C (-40 ... 140 °F)
Storage temperature		-40 ... 70 °C (-40 ... 158 °F)
Pollution degree		3

Degree of protection

IP67 / IP69 / IP69K

Connection

M8 x 1 connector, 3-pin

Material

Housing		PC (Polycarbonate)
Optical face		PMMA

Mass

approx. 10 g

Dimensions

Height		44.5 mm
Width		11 mm
Depth		21.5 mm

General Notes

Related News and Applications

Read more on news and applications related to this product.

R100 photoelectric sensor in safe residual stack monitoring application

Safe Residual Stack Monitoring on Packaging Machines

With increased automation in industrial plants, the requirements for machine safety are rising, which also affects the packaging industry. Learn how an individual safety concept is developed in order to meet higher safety requirements.

More information

We value your privacy!

We and our partners are using technologies like cookies and process personal data like the IP-address or browser information in order to personalize the advertising that you see. This helps us to show you more relevant ads and improves your internet experience. We also use it in order to measure results or align our website content. Because we value your privacy, we are herewith asking for your permission to use these technologies. You can always change/withdraw your consent later by clicking on the settings button on the left lower corner of the page.

Categories	Description	Status
Functional	These cookies are necessary so that you can navigate through the pages and use essential functions (e.g. login).
Analytics	We use these cookies and scripts to measure the visits and clicks on our website in order to constantly improve it.
Marketing	These cookies and similar technologies are used to provide you with personalized and therefore relevant advertising content.