Select Your Country
OPC120W-F200-R2-Ex Stationary read device
Key Benefits at a Glance
- Explosion protection for use in Zone 1, Zone 2, Zone 21 and Zone 22
- Reads 1-D and 2-D codes at high speeds of up to 6 m/s at 30 readings/s
- High depth of focus
- Code quality index output
- Logo comparison
- Presence detection
Show more
Note
All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
DE
- DE
- EN
- ES
- FR
Technical data of OPC120W-F200-R2-Ex
| Stationary read device for hazardous area |
| Light type | Integrated LED lightning (white) | ||||||||||
| Symbologies | Data Matrix, Code 39, Code 128, Int 2 of 5, EAN13, Pharmacode | ||||||||||
| Read distance | 60 ... 160 mm Nominal distance: 120 mm | ||||||||||
| Reading field | Minimum read field: 28 mm x 45 mm Read field at nominal distance: 44 mm x 70 mm Maximum read field: 60 mm x 95 mm | ||||||||||
| Modul size | Minimum module size: 0.3 mm | ||||||||||
| Evaluation frequency | up to 30 Hz | ||||||||||
| Target velocity | triggered max. 6 m/s | ||||||||||
| Data Matrix | |||||||||||
| |||||||||||
| Camera | ||||||||||||||
| ||||||||||||||
| MTTFd | 40.5 a | |
| Mission Time (TM) | 8 a | |
| Diagnostic Coverage (DC) | 0 % |
| Operation indicator | LED green: Ready for operation | |
| LED indication | for good/poor reading |
| Operating voltage | UB | 24 V DC ± 15% , PELV |
| No-load supply current | I0 | max. 250 mA |
| Power consumption | P0 | 6 W |
| Interface type | serial , RS 232 | |
| Transfer rate | max. 115.2 kBit/s | |
| Cable length | max. 30 m |
| Interface type | Ethernet | |
| Protocol | TCP/IP | |
| Transfer rate | 100 MBit/s | |
| Cable length | max. 30 m |
| Input voltage | to be applied externally 24 V ± 15% PELV | |
| Number/Type | Trigger | |
| Input current | approx. 10 mA at 24 V DC | |
| Switching threshold | low: < 10 V, high: > 15 V | |
| Cable length | max. 30 m |
| Number/Type | GOOD, BAD, Matchcode | |
| Switching type | PNP | |
| Switching voltage | to be applied externally 24 V ± 15 % PELV | |
| Switching current | 100 mA each output | |
| Cable length | max. 30 m |
| Standard conformity | ||||||||||||||
| ||||||||||||||
| IECEx approval | IECEx INE 14.0042X | ||||
| ATEX approval | INERIS 14 ATEX 0035X Device type: GUBW1.D.OS-OPC120W-F200-R2 | ||||
| |||||
II 2 GD| Ambient temperature | 0 ... 37 °C (32 ... 98.6 °F) |
| Connection type | Connection terminals, max. conductor cross-section 2.5 mm2 | ||||||||||
| Conductor cross section | 0.13 ... 2.5 mm2 | ||||||||||
| Cable gland | 3 ... 8.5 mm | ||||||||||
| Enclosure cover | threaded round cover | ||||||||||
| Cover fixing | flamepath thread | ||||||||||
| Cover seal | none, O-ring for IP66/67 | ||||||||||
| Flamepath grease | petroleum jelly | ||||||||||
| Degree of protection | IP66 (IP66/IP67 with O-ring) | ||||||||||
| Material | |||||||||||
| |||||||||||
| Mass | approx. 7 kg | ||||||||||
| Dimensions | |||||||||||
| |||||||||||
| Grounding | M6 external grounding points | ||||||||||
