WCS3B-LS810DS Read head

Key Benefits at a Glance

IO-Link interface for service and process data
Non-contact, absolute position encoder
Automatic detection of dirt accumulation
Integrated display module
Output of position and speed
Acceleration measurement in 3 axis
Output of the ID number for ID pads

Please contact us for exact delivery estimation.11.070,00 DKK

Connection Assignment: Read head WCS3B-LS810DS

Note

All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Datasheet Classification Design / Simulation Approvals Software Related Products

Technical data of WCS3B-LS810DS

Read head, IO-Link interface

Passage speed	v	≤ 12.5 m/s
Measuring length		max. 314.5 m
Free tolerances to code rail		horizontal: 31 mm ( ± 15.5 mm ) vertical: 28 mm ( ± 14 mm )
Resolution		± 0.4 mm (1,250 positions/m)

MTTF_d		154 a
Mission Time (T_M)		10 a
Diagnostic Coverage (DC)		0 %

Operation indicator		LED green: constantly on - power on flashing - IO-Link mode
Data flow indicator		LED yellow: data communication active
Error indicator		LED red flashing: read head outside of code rail solid on: internal diagnostic test failed
Display		Display module, 6-digit , adaptable to installation position

Operating voltage	U_B	18 ... 30 V DC
Power consumption	P₀	2.4 VA

Interface type		IO-Link
IO-Link revision		1.1
Device profile		Identification and Diagnosis - I&D Firmware update
Process data		Input: 18 Byte - Position value 32 Bit - Velocity value 16 Bit - Acceleration values 3 x 16 Bit - Ident number 16 Bit - Heartbeat 8 Bit - status data 24 Bit output: 1 Byte - control signals 8 Bit
Vendor ID		1 (0x0001)
Device ID		6291713 (0x600101)
Transfer rate		COM3 (230.4 kbits/s)
Min. cycle time		1.5 ms
SIO mode support		no
Compatible master port type		Class A

Communication interface		IEC 61131-9 / IO-Link V1.1.3
Emitted interference		DIN EN 61000-6-4 , DIN EN 12015
Noise immunity		DIN EN 61000-6-2 , DIN EN 12016
Shock resistance		DIN EN 60068-2-27, half sine 30 g, 18 ms
Vibration resistance		DIN EN 60068-2-6, sine, 5 g, 10 - 2000 Hz, 10 cycles

CSA approval		cCSAus Certified, General Purpose Class 2 power source
CCC approval		CCC approval / marking not required for products rated ≤36 V

Operating temperature		0 ... 60 °C (32 ... 140 °F)
Storage temperature		-40 ... 85 °C (-40 ... 185 °F)
Relative humidity		90 % , noncondensing

Connection type

5-pin, M12 x 1 connector

Degree of protection

IP54

Material

Housing

ABS , PC (Polycarbonate)

Mass

500 g

Ordering information

Mounting plate included with delivery

General Notes

We value your privacy!

We and our partners are using technologies like cookies and process personal data like the IP-address or browser information in order to personalize the advertising that you see. This helps us to show you more relevant ads and improves your internet experience. We also use it in order to measure results or align our website content. Because we value your privacy, we are herewith asking for your permission to use these technologies. You can always change/withdraw your consent later by clicking on the settings button on the left lower corner of the page.

Categories	Description	Status
Technisch erforderlich	Diese Cookies und Skripte sind für die Bedienung der Website wichtig.
Analytics	We use these cookies and scripts to measure the visits and clicks on our website in order to constantly improve it.
Marketing	These cookies and similar technologies are used to provide you with personalized and therefore relevant advertising content.