Solenoid Driver KCD2-SLD-Ex1.1045

1-channel isolated barrier
24 V DC supply (bus or loop powered)
Output 45 mA at 10 V DC
Line fault transparency (LFT)
Test pulse immunity
Housing width 12.5 mm
Up to SIL 3 acc. to IEC/EN 61508

Technical Data
Informative Literature
Product Documentation
Design / Simulation
Approvals
Tilhørende produkter

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Hent hele databladet som PDF:

Uddrag af datablad: Tekniske data for KCD2-SLD-Ex1.1045

General specifications
Signal type		Digital Output
Functional safety related parameters
Safety Integrity Level (SIL)		SIL 3
Systematic capability (SC)		SC 3
Supply
Connection		terminals 5+, 6- loop powered Power Rail or terminals 9+, 10- bus powered
Rated voltage		19 ... 30 V DC loop powered
Input current		75 mA at 24 V, 220 Ω load
Power dissipation		1.4 W at 24 V, 220 Ω load
Input
Connection side		control side
Connection		terminals 5+, 6-
Test pulse length		max. 2 ms from DO card
Signal level		loop powered 1-signal: 19 ... 30 V DC 0-signal: 0 ... 5 V DC bus powered 1-signal: 15 ... 30 V DC (current limited to 5 mA) 0-signal: 0 ... 5 V DC
Rated current		0-signal: typ. 1.6 mA at 1.5 V DC; typ. 8 mA at 3 V DC (maximum leakage current DO card) 1-signal: ≥ 36 mA (minimum load current DO card)
Inrush current		< 200 mA , 10 ms loop powered
Output
Connection side		field side
Connection		terminals 1+, 2-
Internal resistor		285 Ω
Current		typ. 45 mA
Voltage		typ. 10 V
Current limit		45 mA
Open loop voltage		typ. 24.6 V
Load		nominal 0.05 ... 18 kΩ , valid range for line fault detection (LFD)
Output II		fault signal
	Connection	terminals 7, 8 , non-intrinsically safe
	Contact loading	30 V DC/ 0.5 A resistive load
	Mechanical life	10⁵ switching cycles
	Energized/De-energized delay	≤ 20 ms / ≤ 20 ms
Line fault detection
	Test current	max. 350 µA , calculated by I_LFD = 4.7 V / (15 kΩ + R_Load)
Galvanic isolation
Output/other circuits		basic insulation according to IEC/EN 61010-1, rated insulation voltage 300 V_eff
Output II/power supply		basic insulation according to IEC/EN 61010-1, rated insulation voltage 32 V_eff
Indicators/settings
Display elements		LEDs
Control elements		DIP switch
Configuration		via DIP switches
Labeling		space for labeling at the front
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Conformity
Electromagnetic compatibility		NE 21:2012 , EN 61326-3-2:2008 For further information see system description.
Degree of protection		IEC 60529:2013
Protection against electrical shock		EN 61010-1:2010
Ambient conditions
Ambient temperature		-20 ... 60 °C (-4 ... 140 °F) Observe the temperature range limited by derating, see section derating.
Mechanical specifications
Degree of protection		IP20
Connection		screw terminals
Mass		approx. 150 g
Dimensions		12.5 x 119 x 114 mm (0.5 x 4.7 x 4.5 inch) (W x H x D) , housing type A2
Mounting		on 35 mm DIN mounting rail acc. to EN 60715:2001
Data for application in connection with hazardous areas
EU-type examination certificate		EXA 17 ATEX 0002 X
	Marking	II 3(1)G Ex nC ec [ia Ga] IIC T4 Gc II (1)D [Ex ia Da] IIIC I (M1) [Ex ia Ma] I
	Output I	Ex ia
	Voltage	26 V
	Current	93 mA
	Power	605 mW
Supply
	Maximum safe voltage	60 V (Attention! The rated voltage can be lower.)
Input
	Maximum safe voltage	60 V (Attention! The rated voltage can be lower.)
Collective error message
	Maximum safe voltage	60 V (Attention! The rated voltage can be lower.)
Galvanic isolation
	Output I/other circuits	safe electrical isolation acc. to IEC/EN 60079-11, rated insulation voltage 300 V_rms
Directive conformity
	Directive 2014/34/EU	EN 60079-0:2012+A11:2013 , EN 60079-7:2015 , EN 60079-11:2012 , EN 60079-15:2010
International approvals
UL approval		E106378
	Control drawing	116-0448 (cULus)
IECEx approval
	IECEx certificate	IECEx EXA 17.0001X
	IECEx marking	Ex nC ec [ia Ga] IIC T4 Gc [Ex ia Da] IIIC [Ex ia Ma] I
General information
Supplementary information		Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

Classifications

System	Classcode
ECLASS 13.0	27210101
ECLASS 12.0	27210190
ECLASS 11.0	27210190
ECLASS 10.0.1	27210190
ECLASS 9.0	27210190
ECLASS 8.0	27210190
ECLASS 5.1	27210121
ETIM 9.0	EC001485
ETIM 8.0	EC001485
ETIM 7.0	EC001485
ETIM 6.0	EC001485
ETIM 5.0	EC001485
UNSPSC 12.1	39121008

Details: KCD2-SLD-Ex1.1045

Informative Literature: KCD2-SLD-Ex1.1045

Literature	Sprog	Fil type	Fil størrelse
Application Report - Biological Cleaning of Wastwater and Secondary Sedimentation Stage	ENG	PDF	566 KB
Application Report - Energy Generation in Wastwater Treatment Plants	ENG	PDF	532 KB
Application Report - Generating Electricity in Coal-Fired Power Plants	ENG	PDF	412 KB
Application Report - Sand Trap and Preliminary Sedimentation Stage	ENG	PDF	448 KB
Application Report - Screening Systems in Sewage Treatment Plants	ENG	PDF	577 KB
Application Report - Sicherer Brennstofftransport in Kohlekraftwerken	ENG	PDF	391 KB
Application Report - Water Inlet in Wastewater Treatment Plants	ENG	PDF	526 KB
Application Guideline Solenoid Drivers	ENG	PDF	1982 KB

Product Documentation: KCD2-SLD-Ex1.1045

Safety and Security Documentation	Sprog	Fil type	Fil størrelse
Instruktions manual	DAN	PDF	165 KB
Functional Safety Manual	ENG	PDF	435 KB
Manuals
Manual	ENG	PDF	3685 KB

Design / Simulation: KCD2-SLD-Ex1.1045

CAD	Sprog	Fil type	Fil størrelse
CAD 3-D / CAD 3-D	ALL	STP	3088 KB
CAD Portal / CAD Portal	ALL	LINK	---
CAE
CAE EPLAN Data Portal / CAE EPLAN Data Portal	ALL	LINK	---
CAE EPLAN macro EDZ / CAE EPLAN Makro EDZ	ALL	EDZ	2007 KB

Approvals: KCD2-SLD-Ex1.1045

Certificates	Certifikat nr.	Sprog	Fil type	Fil størrelse
Australia New Zealand Test Safe	ANZEx 24.3002X	ALL	PDF	196 KB
Brasil TUV Rheinland Brazil	TÜV 21.1182 X	ALL	PDF	1240 KB
China SITIIAS CCC Ex Certificate	2021322316003612 (Singapore)	ALL	PDF	1300 KB
DNV Marine	TAA00001WX	ALL	PDF	106 KB
EXA IECEx Certificate of Conformity	IECEx EXA 17.0001X	ALL	LINK	---
Europe EXA ATEX Category (1) D ATEX ATEX Category (M1) ATEX Category (1) G ATEX Category 3 G	EXA 17 ATEX 0002X	ALL	PDF	2278 KB
Japan CML	CML 23JPN2001X	ALL	PDF	276 KB
Korea KOSHA	23-AV4BO-0173X	ALL	PDF	691 KB
South Africa MASC	MASC MS/24-8397X	ALL	PDF	805 KB
USA Canada UL Hazardous Location Certificate of Compliance cULus UL E106378	CoC E106378 RepRef E106378-20181130	ALL	PDF	414 KB
United Arab Emirates SGS Gulf Limited ECASEx	23-12-96799/E23-12-099897/NB0002	ALL	PDF	603 KB
United Kingdom CML UKEX Category (1) D UKEX Category (M1) UK-Type Examination Certificate UKEX Category 3 (1) G	CML 21UKEX2891X	ALL	PDF	308 KB
Control Drawings
Control drawing UL / Control drawing UL		ALL	PDF	89 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)	DOC-3545C	ALL	PDF	88 KB

Tilhørende produkter: KCD2-SLD-Ex1.1045

Matching System Components

	KFD2-EB2 Power Feed Module
	Interface for Power Rail, Supply current ≤ 4 A, Replaceable fuse, Relay contact output, reversible, LED status indicationpa

	UPR-03 Universal Power Rail
	35 mm DIN mounting rail with 3-conductor insert, Provides DC supply voltage to all equipped K-System modules, Standard length 2 m (6 foot), simple to customize to application space, Eliminates daisy-chainspa

	UPR-03-S Universal Power Rail
	35 mm DIN mounting rail with 3-conductor insert, Provides DC supply voltage to all equipped K-System modules, Standard length 0.8 m (2.6 ft), simple to customize to application space, Eliminates daisy-chainspa

	UPR-03-M Universal Power Rail
	35 mm DIN mounting rail with 3-conductor insert, Provides DC supply voltage to all equipped K-System modules, Standard length 1.6 m (5 foot), simple to customize to application space, Eliminates daisy-chainspa

	K-DUCT-BU Profile Rail
	Cable trunking is integrated in the mounting profile, Safe spacious separation of safe and hazardous signals, No additional cable guides necessary, Standard length 1.8 m (5.8 ft), simple to customize to application space, With mounting aidspa

	K-DUCT-BU-UPR-03 Profile Rail
	Cable trunking with integrated Power Rail UPR-03, Safe spacious separation of safe and hazardous signals, No additional cable guides necessary, Provides DC supply voltage to all equipped K-System modules, Standard length 1.8 m (5.8 ft), simple to customize to application space, With end caps UPR-E, cover and mounting aidspa

Accessories

	KC-ST-5GN Terminal Block
	2-pin screw terminal, For KC modules of K-System, Packaging unit: 5 pieces greenpa

	KC-ST-5BU Terminal Block
	2-pin screw terminal, For KC modules of K-System, Packaging unit: 5 pieces bluepa

	KF-CP Coding Pins
	Coding of K-System terminal blocks, Coding of LB/FB-System front sockets, Packaging unit: 20 x 6 coding pinspa

Generelle bemærkninger vedr. produktoplysninger fra Pepperl+Fuchs

Hurtige links

Selector for Safety Products

Choose from various selection criteria like safety integrity level, performance level, device function, and signal type and find the SIL/PL assessed device that you are looking for.

Pepperl+Fuchs A/S
Kirkebjerg Allé 90
DK-2605 Brøndby
Denmark
info@dk.pepperl-fuchs.com
phone +45 7010 4210

Pepperl+Fuchs er markedsledende indenfor udvikling og fabrikation af elektroniske sensorer og komponenter til det globale automatiseringsmarked. Kontinuerlig innovation, kombineret med høj kvalitet og stabil vækst har sikret uafbrudt succes gennem mere end 70 år. Pepperl+Fuchs har 6.300 ansatte på verdensplan og har produktionsfaciliteter i Tyskland, USA, Singapore, Ungarn, Indonesien og Vietnam; de fleste ISO 9001 certificerede.