Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Hent hele databladet som PDF:
Produkt beskrivelse |
---|
Code carrier for optical high-temperature identification system, stainless steel |
General specifications | ||
---|---|---|
Read distance | 250 ... 450 mm Depending on the respective read device |
|
Data storage | Range of values: 6-character numerical, between 000.000 and 999.999 plus 1 check digit |
|
Ambient conditions | ||
Ambient temperature | -25 ... 500 °C (-13 ... 932 °F) | |
Mechanical specifications | ||
Material thickness | 2 mm | |
Material | ||
Housing | Stainless steel V2A | |
Installation | Parallel to the reader at the respective reading distance Tilt angle 10° max. |
|
Mass | approx. 280 g | |
Note | Coating of the code sheets is possible, provided that reliable hole detection is guaranteed. | |
Hole diameter | 5 mm | |
General information | ||
Ordering information | yyyyyy: starting value zzzzzz: number The final value is determined as follows: Final value = start value + number - 1 Note: The code plate numbers are always increased by the value 1 from the start value to the final value. |
System | Classcode |
---|---|
ECLASS 13.0 | 27310192 |
ECLASS 12.0 | 27310192 |
ECLASS 11.0 | 27319290 |
ECLASS 10.0.1 | 27319090 |
ECLASS 9.0 | 27319290 |
ECLASS 8.0 | 27319290 |
ECLASS 5.1 | 27310290 |
ETIM 9.0 | EC003015 |
ETIM 8.0 | EC003015 |
ETIM 7.0 | EC003015 |
ETIM 6.0 | EC003015 |
ETIM 5.0 | EC003015 |
UNSPSC 12.1 | 43211711 |
Accessory of | ||||||
---|---|---|---|---|---|---|
|
||||||
|