Support Industrielle sensorer
Support Explosion Protection
Commmunication drivers DTM HART Comm
- Communication DTM
- Frame application, like e. g. PACTware, must be installed separately
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Hent hele databladet som PDF:
Uddrag af datablad: Tekniske data for DTM HART Comm
| Produkt beskrivelse |
|---|
| Device type manager (DTM) for HART communication |
| General specifications | ||
|---|---|---|
| Description | Communication DTM for use of HART devices via HART modem or serial interface * * Note: DTMs do only work in conjunction with FDT frame application e. g. PACTware. |
|
| Software | ||
| Hardware requirements | - processor min. 500 MHz - working memory: min. 256 MB - hard disk space: min. 200 MB - graphic resolution 1024 x 768 Depending on the complexity of the project and the DTMs used, the memory requirement may be several times higher. |
|
| Software requirements | operating system: - Microsoft Windows 7, Windows 8 or Windows 10 internet browser: - Microsoft Internet Explorer 4.0 or higher software components for installation - Microsoft .Net Framework 3.5 or higher - FDT framework program PACTware 5.X - the application-specific device type manager |
|
| Languages | German, English, French, Spanish, Russian can be selected | |
| Licensing | The Pepperl+Fuchs DTM-Collections can be downloaded separately or altogether in a version with basic license. This version can also be obtained on CD-ROM from Pepperl+Fuchs. Basic license: The software remains a basic version after installation under the terms of a basic license that may have limited features. The basic license is delivered free of charge. Full license: The full license can only be activated by an individual license key number and transfers a basic version of software to a full version under the term of a full license. The software under these terms can be installed on more than one workstation simultaneously. The full licenses with the functionality quoted in the following can be ordered at Pepperl+Fuchs. |
|
| Available licenses | DTM-Collection HART Comm: basic license already includes full license, no further licenses necessary |
|
| Installation | Administrator rights are required For installation in Windows. | |
| Configuration | ||
| Representation of the system configuration | Graphic representation of all communication and device type managers in the tree structure. In case of online operation colour code for identification of defective units and simulation operation. Multiple windows can be opened simultaneously. It is therefore possible to view the set device parameters, to monitor the measurement value and to display the device diagnostic simultaneously. | |
| System planning, application processing | Generation of a configuration by means of a graphical application processing menu. Editing of available projects. Selection switch markings for each channel. Offline configuration, saving of project data to hard disk. Automatic comparison of the project plan to the actual available system when establishing connections on the device and parameter levels. | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27242505 |
| ECLASS 12.0 | 27242502 |
| ECLASS 11.0 | 27242502 |
| ECLASS 10.0.1 | 27242502 |
| ECLASS 9.0 | 27242502 |
| ECLASS 8.0 | 27242502 |
| ECLASS 5.1 | 27242502 |
| ETIM 9.0 | EC000757 |
| ETIM 8.0 | EC001416 |
| ETIM 7.0 | EC001416 |
| ETIM 6.0 | EC001416 |
| ETIM 5.0 | EC000809 |
| UNSPSC 12.1 | 43232901 |
Details: DTM HART Comm
Software: DTM HART Comm
| Device Description Files/Drivers | Udgivelses info | Fil type | Fil størrelse |
|---|---|---|---|
| HART Comm DTM / HART Comm DTM | 1.0.55 | ZIP | 9385 KB |
Tilhørende produkter: DTM HART Comm
| Accessory of | ||||||
|---|---|---|---|---|---|---|
|
||||||
| Matching System Components | ||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
| Accessories | ||||||
|
||||||
|
||||||
|
||||||
Direkte til
Pepperl+Fuchs A/S
Kirkebjerg Allé 90
DK-2605 Brøndby
Denmark
info@dk.pepperl-fuchs.com
+45 7010 4210
© 2024 Alle rettigheder forbeholdt.
Pepperl+Fuchs er markedsledende indenfor udvikling og fabrikation af elektroniske sensorer og komponenter til det globale automatiseringsmarked. Kontinuerlig innovation, kombineret med høj kvalitet og stabil vækst har sikret uafbrudt succes gennem mere end 70 år. Pepperl+Fuchs har 6.300 ansatte på verdensplan og har produktionsfaciliteter i Tyskland, USA, Singapore, Ungarn, Indonesien og Vietnam; de fleste ISO 9001 certificerede.