Solenoid Driver KFD2-RCI-1

1-channel signal conditioner
24 V DC supply (Power Rail)
Output 20.4 mA at 13.5 V DC
19 V DC ... 30 V DC input
Test pulse immunity
Line fault detection (LFD)
Up to SIL 3 acc. to IEC/EN 61508

Technical Data
Informative Literature
Product Documentation
Design / Simulation
Approvals
Tilhørende produkter

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Hent hele databladet som PDF:

Uddrag af datablad: Tekniske data for KFD2-RCI-1

General specifications
Signal type		Digital Output
Functional safety related parameters
Safety Integrity Level (SIL)		SIL 3
Supply
Connection		Power Rail or terminals 14+, 15-
Rated voltage		19 ... 30 V DC
Rated current		< 35 mA
Power consumption		< 0.8 W
Input
Connection side		control side
Connection		terminals 10+, 11-
Test pulse length		max. 2 ms from DO card
Input current		40 mA at 19 ... 30 V DC
Signal level		1-signal: 19 ... 30 V DC 0-signal: 0 ... 5 V DC
Power consumption		< 1.2 W
Operating mode		loop powered
Output
Connection side		field side/control side
Connection		terminals 1+, 3- (terminals 1+, 2 for test loop)
Internal resistor		approx. 275 Ω
Current		≤ 20.4 mA
Voltage		≥ 13.5 V
Open loop voltage		> 16 V
Voltage		1-signal: > 13.5 V
Current		1-signal: 20.4 A 0-signal: 4.2 mA
Load		max. 650 Ω
Response time		< 40 ms input to output
Line fault detection		short circuit voltage < 1 V , open circuit voltage > 16 V
Output II
	Connection	terminal 7: source (-) or sink (+), terminal 8: source (+), terminal 9: sink (-)
	Current	11 mA (source or sink mode)
	Voltage	9 ... 30 V sink mode from external supply
	Load	max. 650 Ω , source mode , for HART ≥ 230 Ω
	Communication	pass-through of HART signal between input II and output
Galvanic isolation
Field circuit/control circuit		basic insulation according to IEC 61010-1, rated insulation voltage 300 V_eff
Input/power supply		functional insulation, rated insulation voltage 50 V_eff
Output II/power supply		functional insulation, rated insulation voltage 50 V_eff
Indicators/settings
Display elements		LEDs
Control elements		DIP switch
Configuration		via DIP switches
Labeling		space for labeling at the front
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Conformity
Electromagnetic compatibility		NE 21:2012
Degree of protection		IEC 60529:2001
Ambient conditions
Ambient temperature		-20 ... 60 °C (-4 ... 140 °F)
Mechanical specifications
Degree of protection		IP20
Connection		screw terminals
Mass		approx. 150 g
Dimensions		20 x 119 x 115 mm (0.8 x 4.7 x 4.5 inch) (W x H x D) , housing type B2
	Height	119 mm
	Width	20 mm
	Depth	115 mm
Mounting		on 35 mm DIN mounting rail acc. to EN 60715:2001
General information
Supplementary information		Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

Classifications

System	Classcode
ECLASS 13.0	27210101
ECLASS 12.0	27210190
ECLASS 11.0	27210190
ECLASS 10.0.1	27210190
ECLASS 9.0	27210190
ECLASS 8.0	27210190
ECLASS 5.1	27210121
ETIM 9.0	EC001485
ETIM 8.0	EC001485
ETIM 7.0	EC001485
ETIM 6.0	EC001485
ETIM 5.0	EC001485
UNSPSC 12.1	39121008

Details: KFD2-RCI-1

Informative Literature: KFD2-RCI-1

Literature	Sprog	Fil type	Fil størrelse
Application Report - Biological Cleaning of Wastwater and Secondary Sedimentation Stage	ENG	PDF	566 KB
Application Report - Generating Electricity in Coal-Fired Power Plants	ENG	PDF	412 KB
Application Report - Sand Trap and Preliminary Sedimentation Stage	ENG	PDF	448 KB
Application Report - Screening Systems in Sewage Treatment Plants	ENG	PDF	577 KB

Product Documentation: KFD2-RCI-1

Safety and Security Documentation	Sprog	Fil type	Fil størrelse
Instruktions manual	DAN	PDF	47 KB
Safety Manual	ENG	PDF	597 KB
Manuals
System Manual	ENG	PDF	3694 KB

Design / Simulation: KFD2-RCI-1

CAD	Sprog	Fil type	Fil størrelse
CAD 3-D / CAD 3-D	ALL	STP	3123 KB
CAE
CAE EPLAN Data Portal / CAE EPLAN Data Portal	ALL	LINK	---
CAE EPLAN macro EDZ / CAE EPLAN Makro EDZ	ALL	EDZ	1308 KB

Approvals: KFD2-RCI-1

Certificates	Certifikat nr.	Sprog	Fil type	Fil størrelse
exida Functional Safety Assessment	P+F 0905-35R1-C R015 V1R0	ALL	PDF	599 KB
Declaration of Conformity
EU Declaration of Conformity (P+F)	TDOC-7214_DAN	DAN	PDF	217 KB
UK Declaration of Conformity (P+F)	TDOC-7231_ENG	ENG	PDF	192 KB

Tilhørende produkter: KFD2-RCI-1

Matching System Components

	KFD2-EB2 Power Feed Module
	Interface for Power Rail, Supply current ≤ 4 A, Replaceable fuse, Relay contact output, reversible, LED status indicationpa

	UPR-03 Universal Power Rail
	35 mm DIN mounting rail with 3-conductor insert, Provides DC supply voltage to all equipped K-System modules, Standard length 2 m (6 foot), simple to customize to application space, Eliminates daisy-chainspa

	UPR-03-S Universal Power Rail
	35 mm DIN mounting rail with 3-conductor insert, Provides DC supply voltage to all equipped K-System modules, Standard length 0.8 m (2.6 ft), simple to customize to application space, Eliminates daisy-chainspa

	UPR-03-M Universal Power Rail
	35 mm DIN mounting rail with 3-conductor insert, Provides DC supply voltage to all equipped K-System modules, Standard length 1.6 m (5 foot), simple to customize to application space, Eliminates daisy-chainspa

	K-DUCT-GY Profile Rail
	Cable trunking is integrated in the mounting profile, Safe spacious separation of field and control signals, No additional cable guides necessary, Standard length 1.8 m (5.8 ft), simple to customize to application space, With mounting aidspa

	K-DUCT-GY-UPR-03 Profile Rail
	Cable trunking with integrated Power Rail UPR-03, Safe spacious separation of field and control signals, No additional cable guides necessary, Provides DC supply voltage to all equipped K-System modules, Standard length 1.8 m (5.8 ft), simple to customize to application space, With end caps UPR-E, cover and mounting aidspa

Accessories

	KF-ST-5GN Terminal Block
	3-pin screw terminal, For KF modules of K-System, Packaging unit: 5 pieces greenpa

	KF-CP Coding Pins
	Coding of K-System terminal blocks, Coding of LB/FB-System front sockets, Packaging unit: 20 x 6 coding pinspa

Generelle bemærkninger vedr. produktoplysninger fra Pepperl+Fuchs

Hurtige links

Selector for Safety Products

Choose from various selection criteria like safety integrity level, performance level, device function, and signal type and find the SIL/PL assessed device that you are looking for.

Pepperl+Fuchs A/S
Kirkebjerg Allé 90
DK-2605 Brøndby
Denmark
info@dk.pepperl-fuchs.com
phone +45 7010 4210

Pepperl+Fuchs er markedsledende indenfor udvikling og fabrikation af elektroniske sensorer og komponenter til det globale automatiseringsmarked. Kontinuerlig innovation, kombineret med høj kvalitet og stabil vækst har sikret uafbrudt succes gennem mere end 70 år. Pepperl+Fuchs har 6.300 ansatte på verdensplan og har produktionsfaciliteter i Tyskland, USA, Singapore, Ungarn, Indonesien og Vietnam; de fleste ISO 9001 certificerede.