Support Industrielle sensorer
Support Explosion Protection

Through-beam ultrasonic barrier UBE800-F77-SE2-V31

UBE800-F77-SE2-V31
  • Miniature design
  • Highly visible LEDs for Power ON and switching state
  • High switching frequency
  • Program input
  • Degree of protection IP67

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Hent hele databladet som PDF:


Uddrag af datablad: Tekniske data for   UBE800-F77-SE2-V31

Produkt beskrivelse
Through-beam ultrasonic barrier
General specifications
Sensing range0 ... 800 mm emitter/receiver spacing
Standard target platesee table
Transducer frequencyapprox. 300 kHz
Response delay≤ 5 ms
Limit data
Permissible cable lengthmax. 300 m
Indicators/operating means
LED greenPower on ( emitter )
LED yellowswitching state ( receiver )
Electrical specifications
Rated operating voltage24 V DC
Operating voltage20 ... 30 V DC , ripple 10 %SS ; 12 ... 20 V DC sensitivity reduced to 80 %
No-load supply current≤ 20 mA
Time delay before availability≤ 150 ms
Input
Input type1 program input (receiver)
Levellow level : 0 ... 0.7 V ;   high level : > 14 V
Input impedance16 kΩ
Pulse length≥ 3 s
Output
Output type1 switch output PNP, NO
Rated operating current200 mA , short-circuit/overload protected
Voltage drop≤ 2 V
Switching frequency  100 Hz
Off-state current≤ 0.01 mA
Compliance with standards and directives
Standard conformity
StandardsEN IEC 60947-5-2:2020
IEC 60947-5-2:2019
Approvals and certificates
UL approvalcULus Listed, Class 2 Power Source
CCC approvalCCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature-25 ... 70 °C (-13 ... 158 °F)
Storage temperature-40 ... 85 °C (-40 ... 185 °F)
Shock resistance30 g , 11 ms period
Vibration resistance10 ... 55 Hz , Amplitude ± 1 mm
Mechanical specifications
Connection typeM8 x 1 connector , 4-pin
Degree of protectionIP67
Material
HousingPolycarbonate
Transducerepoxy resin/hollow glass sphere mixture; polyurethane foam
Installation positionany position
Massper 10 g
Tightening torque, fastening screwsmax. 0.2 Nm
Dimensions
Height31 mm
Width12 mm
Length23 mm

Classifications

SystemClasscode
ECLASS 13.027272801
ECLASS 12.027272801
ECLASS 11.027272801
ECLASS 10.0.127272801
ECLASS 9.027272801
ECLASS 8.027272801
ECLASS 5.127272801
ETIM 9.0EC001847
ETIM 8.0EC001847
ETIM 7.0EC001847
ETIM 6.0EC001847
ETIM 5.0EC001847
UNSPSC 12.141111960

Details: UBE800-F77-SE2-V31

Product Documentation: UBE800-F77-SE2-V31

Language Selection:
Brief InstructionsSprogFil typeFil størrelse
Commissioning instruction for ultrasonic sensor series UBE-F77-E with switching output / Inbetriebnahmeanleitung für Ultraschallsensor-Serie UBE-F77-E mit SchaltausgangALLPDF330 KB
Safety and Security Documentation
Instruktions manualDANPDF146 KB

Design / Simulation: UBE800-F77-SE2-V31

Language Selection:
CADSprogFil typeFil størrelse
CAD 3-D / CAD 3-DALLSTP68 KB
CAD Portal / CAD PortalALLLINK---
CAE
CAE EPLAN Data Portal / CAE EPLAN Data PortalALLLINK---
EPLAN macro EDZ / EPLAN Makro EDZALLEDZ75 KB

Approvals: UBE800-F77-SE2-V31

Language Selection:
CertificatesCertifikat nr.SprogFil typeFil størrelse
Canada USA UL Ordinary LocationUL-US-2140030-0 / UL-CA-2133555-0ALLPDF546 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)DOC-2942BALLPDF48 KB
UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F)DOC-5473ALLPDF41 KB

Tilhørende produkter: UBE800-F77-SE2-V31

Accessories

Female cordset single-ended M8 straight A-coded, 4-pin, PVC cable greyfa

Female cordset single-ended M8 angled A-coded, 4-pin, PVC cable greyfa
Mounting aid for ML7 and ML8 series, Mounting bracketfa

Pepperl+Fuchs offers you various downloadable documents containing knowledge on ultrasonic sensors.