Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Hent hele databladet som PDF:
Uddrag af datablad: Tekniske data for
UBE800-F77-SE0-V31
Produkt beskrivelse |
Through-beam ultrasonic barrier |
General specifications |
Sensing range | 0 ... 800 mm emitter/receiver spacing |
Standard target plate | see table |
Transducer frequency | approx. 300 kHz |
Response delay | ≤ 5 ms |
Limit data |
Permissible cable length | max. 300 m |
Indicators/operating means |
LED green | Power on ( emitter ) |
LED yellow | switching state ( receiver ) |
Electrical specifications |
Rated operating voltage | 24 V DC |
Operating voltage | 20 ... 30 V DC , ripple 10 %SS ; 12 ... 20 V DC sensitivity reduced to 80 % |
No-load supply current | ≤ 20 mA |
Time delay before availability | ≤ 150 ms |
Input |
Input type | 1 program input (receiver) |
Level | low level : 0 ... 0.7 V ; high level : > 14 V |
Input impedance | 16 kΩ |
Pulse length | ≥ 3 s |
Output |
Output type | 1 switch output E0, NPN, NO |
Rated operating current | 200 mA , short-circuit/overload protected |
Voltage drop | ≤ 2 V |
Switching frequency | 100 Hz |
Off-state current | ≤ 0.01 mA |
Compliance with standards and directives |
Standard conformity | |
| Standards | EN IEC 60947-5-2:2020 IEC 60947-5-2:2019 |
Approvals and certificates |
UL approval | cULus Listed, Class 2 Power Source |
CCC approval | CCC approval / marking not required for products rated ≤36 V |
Ambient conditions |
Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) |
Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
Shock resistance | 30 g , 11 ms period |
Vibration resistance | 10 ... 55 Hz , Amplitude ± 1 mm |
Mechanical specifications |
Connection type | M8 x 1 connector , 4-pin |
Degree of protection | IP67 |
Material | |
| Housing | Polycarbonate |
| Transducer | epoxy resin/hollow glass sphere mixture; polyurethane foam |
Installation position | any position |
Mass | per 10 g |
Tightening torque, fastening screws | max. 0.2 Nm |
Dimensions | |
| Height | 31 mm |
| Width | 12 mm |
| Length | 23 mm |
Classifications
System | Classcode |
ECLASS 13.0 | 27272801 |
ECLASS 12.0 | 27272801 |
ECLASS 11.0 | 27272801 |
ECLASS 10.0.1 | 27272801 |
ECLASS 9.0 | 27272801 |
ECLASS 8.0 | 27272801 |
ECLASS 5.1 | 27272801 |
ETIM 9.0 | EC001847 |
ETIM 8.0 | EC001847 |
ETIM 7.0 | EC001847 |
ETIM 6.0 | EC001847 |
ETIM 5.0 | EC001847 |
UNSPSC 12.1 | 41111960 |
Details:
UBE800-F77-SE0-V31
Product Documentation:
UBE800-F77-SE0-V31
Approvals:
UBE800-F77-SE0-V31
Tilhørende produkter:
UBE800-F77-SE0-V31
Accessories |
|
|
|
Female cordset single-ended M8 straight A-coded, 4-pin, PVC cable greyfa |
|
|
|
|
Female cordset single-ended M8 angled A-coded, 4-pin, PVC cable greyfa |
|
|
|
|
Mounting aid for ML7 and ML8 series, Mounting bracketfa |
|