Support Industrielle sensorer
Support Explosion Protection
Industrielle sensorer

Ultrasonic sensor UC4000-L2M-B16-0,3M-DT6P-M

UC4000-L2M-B16-0,3M-DT6P-M
  • CANopen interface
  • E1-Type approval
  • High EMC resistance
  • Sensor head bidirectional and rotatable
  • Rugged metal base
  • Function indicators visible from all directions
  • Degree of protection IP68

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Hent hele databladet som PDF:


Uddrag af datablad: Tekniske data for   UC4000-L2M-B16-0,3M-DT6P-M

Produkt beskrivelse
Single head system
General specifications
Sensing range200 ... 4000 mm
Adjustment range240 ... 4000 mm
Dead band0 ... 200 mm
Standard target plate100 mm x 100 mm
Transducer frequencyapprox. 85 kHz
Nominal ratings
Linearity error< 40 mm
Temperature drift< +/- 100 mm
Time delay before availability≤ 700 ms
Functional safety related parameters
MTTFd431 a
Mission Time (TM)20 a
Diagnostic Coverage (DC)0 %
Indicators/operating means
LED yellowobject in evaluation range
LED red/greenCANopen status display
Electrical specifications
Operating voltage9 ... 30 V
No-load supply current≤ 50 mA
Power consumptiontyp. 0.6 W
Interface
Interface typeCAN
Communication protocolCANopen
Process dataInput: 48 Bit
- measured value (distance value) 16 Bit
- signal quality 8 Bit
- counter-1 16 Bit or counter-2 8 Bit
- status register 8 Bit
Node IDprogrammable
Vendor ID173 (0xAD)
Product code50331651 (0x03000003)
Transfer rate250 kBit/s , programmable 125 ... 1000 kBit/s
Terminationexternal
Cycle time53.5 ms preset , programmable
Min. cycle time53.5 ms
Compliance with standards and directives
Standard conformity
StandardsEN IEC 60947-5-2:2020
IEC 60947-5-2:2019
Communication interfaceCiA 310, Ver. 4.2.0
Approvals and certificates
UL approvalUL Recognized , General purpose , Class 2 power source
CCC approvalCCC approval / marking not required for products rated ≤36 V
UN/ECE Regulation No. 10 (E1)Type-approval number: 10R-069608
Ambient conditions
Ambient temperature-40 ... 85 °C (-40 ... 185 °F)
Storage temperature-40 ... 85 °C (-40 ... 185 °F)
Mechanical specifications
Connection typefixed cable with plug
Degree of protectionIP68
Material
HousingPA-GF35
Connector
Number of pins6
Connection assemblyDeutsch connector DT04-6P-CE02
Deutsch contact 1060-16-0622
Deutsch wedge W6P
Cable
Cable diameter7.25 mm ± 0.2 mm
Bending radius> 10 x cable diameter
MaterialPUR
Colorblack
Number of cores5
Core cross section0.8 mm2
Length352 mm ± 5 mm
Mass240 g
Dimensions
Height40 mm
Width40 mm
Length67 mm
Factory settings
Default settingmeasured value "distance", signal quality, counter-2 (object 0x2000)
Beam widthwide (object 0x4000)
Synchronizationdeactivated (object 0x2020)
Node ID16
Transfer rate250 kBit/s

Classifications

SystemClasscode
ECLASS 13.027272803
ECLASS 12.027272803
ECLASS 11.027272803
ECLASS 10.0.127272803
ECLASS 9.027272803
ECLASS 8.027272803
ECLASS 5.127272803
ETIM 9.0EC001849
ETIM 8.0EC001849
ETIM 7.0EC001849
ETIM 6.0EC001849
ETIM 5.0EC001849
UNSPSC 12.141111960

Details: UC4000-L2M-B16-0,3M-DT6P-M

Informative Literature: UC4000-L2M-B16-0,3M-DT6P-M

Language Selection:
LiteratureSprogFil typeFil størrelse
Application Report - Avoid Collisions Reliably and SafelyENGPDF344 KB

Product Documentation: UC4000-L2M-B16-0,3M-DT6P-M

Language Selection:
Safety and Security DocumentationSprogFil typeFil størrelse
Instruktions manualDANPDF146 KB
Manuals
Manual UC***-L2M series, Parameterization of Ultrasonic Sensors with CANopen-SchnittstelleENGPDF3975 KB

Design / Simulation: UC4000-L2M-B16-0,3M-DT6P-M

Language Selection:
CADSprogFil typeFil størrelse
CAD 3-D / CAD 3-DALLSTP1627 KB

Approvals: UC4000-L2M-B16-0,3M-DT6P-M

Language Selection:
CertificatesCertifikat nr.SprogFil typeFil størrelse
Canada USA UL Ordinary LocationUL-US-2145517-0 / UL-CA-2138212-0ALLPDF547 KB
UNECE KBA E110R-069608ALLPDF8712 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)DOC-7212ALLPDF50 KB
UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F)DOC-7213ALLPDF43 KB

Software: UC4000-L2M-B16-0,3M-DT6P-M

Language Selection:
Device Description Files/DriversUdgivelses infoFil typeFil størrelse
EDS file for UC4000-L2M-B16* / EDS-Datei für UC4000-L2M-B16*ZIP7 KB
CANopen Communication DTM / CANopen Communication DTMV1.1.0.3 / 2023-11-29ZIP10721 KB
DTM for UC*-L2M-B16* / DTM für UC*-L2M-B16*V1.0.0.8 / 2024-08-27ZIP17939 KB
Software Tools
CAN Parameterization Tool / CAN ParametriertoolV1.00.003 / 2024-10-07ZIP226530 KB

Tilhørende produkter: UC4000-L2M-B16-0,3M-DT6P-M

Accessories
Terminal resistor M12 male straight A-coded 5-pin, for DeviceNet, CANopenfa
Generelle bemærkninger vedr. produktoplysninger fra Pepperl+Fuchs
USi-safety Sensor System

The USi-safety ultrasonic sensor system is breaking new ground for safety applications—whether in challenging, dusty environments or in outdoor areas.

Pepperl+Fuchs offers you various downloadable documents containing knowledge on ultrasonic sensors.

Pepperl+Fuchs A/S
Kirkebjerg Allé 90
DK-2605 Brøndby
Denmark
info@dk.pepperl-fuchs.com
phone +45 7010 4210

© 2024 Alle rettigheder forbeholdt.

Pepperl+Fuchs er markedsledende indenfor udvikling og fabrikation af elektroniske sensorer og komponenter til det globale automatiseringsmarked. Kontinuerlig innovation, kombineret med høj kvalitet og stabil vækst har sikret uafbrudt succes gennem mere end 70 år. Pepperl+Fuchs har 6.300 ansatte på verdensplan og har produktionsfaciliteter i Tyskland, USA, Singapore, Ungarn, Indonesien og Vietnam; de fleste ISO 9001 certificerede.