Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Hent hele databladet som PDF:
Uddrag af datablad: Tekniske data for
UC6000-30GM70-2E2R2-V15
| Produkt beskrivelse |
| Ultrasonic direct detection sensor |
| General specifications |
| Sensing range | 350 ... 6000 mm |
| Adjustment range | 400 ... 6000 mm |
| Dead band | 0 ... 350 mm |
| Standard target plate | 100 mm x 100 mm |
| Transducer frequency | approx. 80 kHz |
| Response delay | ≤ 275 ms |
| Nominal ratings |
| Temperature drift | ≤ ± 1.5 % of full-scale value |
| Time delay before availability | ≤ 300 ms |
| Limit data |
| Permissible cable length | max. 300 m |
| Indicators/operating means |
| LED yellow | solid Switching state switch output 1 |
| LED green/yellow | yellow: switching state switch output 2
green: Teach-In |
| Potentiometer | Switching output 1 and Switching output 2 adjustable |
| Electrical specifications |
| Rated operating voltage | 24 V DC |
| Operating voltage | 12 ... 30 V DC (including ripple) |
| Ripple | ≤ 10 % |
| No-load supply current | ≤ 50 mA |
| Interface |
| Interface type | Infrared |
| Mode | point-to-point connection |
| Input/Output |
| Input/output type | 1 synchronization connection, bidirectional ( Factory setting: synchronized mode ) / Teach-In input |
| 0 Level | ≤ 3 V |
| 1 Level | ≥ 15 V |
| Input impedance | typ. 900 Ω |
| Number of sensors | max. 10 |
| Switching output |
| Output type | 2 switch outputs PNP, NO ( NC contact programmable ) |
| Default setting | 400 ... 6000 mm ( adjustable via potentiometer ) |
| Repeat accuracy | ± 9 mm |
| Operating current | per 150 mA , short-circuit/overload protected |
| Switching frequency | ≤ 1 Hz |
| Switching hysteresis | 60 mm ( programmable ) |
| Voltage drop | ≤ 3 V |
| Off-state current | ≤ 10 µA |
| Compliance with standards and directives |
| Standard conformity | |
| Standards | EN IEC 60947-5-2:2020
IEC 60947-5-2:2019 |
| Approvals and certificates |
| UL approval | cULus Listed, Class 2 Power Source |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Ambient conditions |
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
| Shock resistance | 30 g , 11 ms period |
| Vibration resistance | 10 ... 55 Hz , Amplitude ± 1 mm |
| Mechanical specifications |
| Connection type | Connector plug M12 x 1 , 5-pin |
| Degree of protection | IP65 |
| Material | |
| Housing | brass, nickel-plated |
| Transducer | epoxy resin/hollow glass sphere mixture; polyurethane foam |
| Installation position | any position |
| Mass | 280 g |
| Dimensions | |
| Length | 121.2 mm |
| Diameter | 30 mm |
| Construction type | Cylindrical |
Classifications
| System | Classcode |
| ECLASS 13.0 | 27272803 |
| ECLASS 12.0 | 27272803 |
| ECLASS 11.0 | 27272803 |
| ECLASS 10.0.1 | 27272803 |
| ECLASS 9.0 | 27272803 |
| ECLASS 8.0 | 27272803 |
| ECLASS 5.1 | 27272803 |
| ETIM 9.0 | EC001849 |
| ETIM 8.0 | EC001849 |
| ETIM 7.0 | EC001849 |
| ETIM 6.0 | EC001849 |
| ETIM 5.0 | EC001849 |
| UNSPSC 12.1 | 41111960 |
Details:
UC6000-30GM70-2E2R2-V15
Product Documentation:
UC6000-30GM70-2E2R2-V15
Design / Simulation:
UC6000-30GM70-2E2R2-V15
Approvals:
UC6000-30GM70-2E2R2-V15
Software:
UC6000-30GM70-2E2R2-V15
Tilhørende produkter:
UC6000-30GM70-2E2R2-V15
| Accessories |
|
|
|
| Mounting flange, 30 mmfa |
|
|
|
|
| Universal mounting bracket for cylindrical sensors with a diameter of 5 ... 30 mmfa |
|
|
|
|
| Female cordset single-ended M12 straight A-coded, 5-pin, PUR cable greyfa |
|
|
|
|
| Interface cable for parameterization of sensors with IrDA interfacefa |
|
|
|
|
| Configuration software for ultrasonic sensors, Parameterization and monitor software, Plug and Playfa |
|
+45 7010 4210