Enkodere

Ikke tilgængelig for indkøb

Incremental rotary encoder 10-****1

Industrial standard housing ∅58 mm
Up to 5000 ppr
Servo flange, square flange or clamping flange
Special flanges with special shafts on demand
Stainless steel version
10 V ... 30 V with short-circuit proof push-pull output

Technical Data
Approvals
Tilhørende produkter

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Hent hele databladet som PDF:

Uddrag af datablad: Tekniske data for 10-****1

General specifications
Pulse count		max. 5000
Electrical specifications
Operating voltage		10 ... 30 V DC
No-load supply current		max. 80 mA
Output
Output type		push-pull, incremental
Voltage drop		< 4 V
Load current		max. per channel 40 mA , short-circuit protected, reverse polarity protected
Output frequency		max. 100 kHz
Rise time		250 ns
De-energized delay		250 ns
Connection
Connector		type 42306 (M16), 6-pin type 42308 (M16), 8-pin type 9414 (M16), 5-pin type 9416 (M23), 12-pin
Cable		∅6 mm, 4 x 2 x 0.14 mm², 2 m
Standard conformity
Degree of protection		DIN EN 60529, IP65
Climatic testing		DIN EN 60068-2-3, no moisture condensation
Emitted interference		EN 61000-6-4:2007/A1:2011
Noise immunity		EN 61000-6-2:2005
Approvals and certificates
UL approval		cULus Listed, General Purpose, Class 2 Power Source
Ambient conditions
Operating temperature
	Glass disk	-20 ... 70 °C (-4 ... 158 °F)
	Plastic disk	-20 ... 60 °C (-4 ... 140 °F)
Storage temperature
	Glass disk	-40 ... 70 °C (-40 ... 158 °F)
	Plastic disk	-40 ... 60 °C (-40 ... 140 °F)
Mechanical specifications
Material
	Combination 1	housing: diecast zinc flange: aluminum 3.1645 shaft: stainless steel 1.4305 / AISI 303
	Combination 2 (Inox)	housing: stainless steel flange: stainless steel shaft: stainless steel
Mass		approx. 335 g (combination 1) approx. 1400 g (combination 2)
Rotational speed		max. 10000 min ^-1
Moment of inertia		≤ 30 gcm²
Starting torque		≤ 1.5 Ncm
Shaft load
	Axial	60 N
	Radial	80 N

Classifications

System	Classcode
ECLASS 13.0	27270501
ECLASS 12.0	27270501
ECLASS 11.0	27270501
ECLASS 10.0.1	27270501
ECLASS 9.0	27270501
ECLASS 8.0	27270501
ECLASS 5.1	27270501
ETIM 9.0	EC001486
ETIM 8.0	EC001486
ETIM 7.0	EC001486
ETIM 6.0	EC001486
ETIM 5.0	EC001486
UNSPSC 12.1	39121527

Details: 10-****1

Approvals: 10-****1

Certificates	Certifikat nr.	Sprog	Fil type	Fil størrelse
Canada, USA UL General Purpose	UL-US-2233187-0 / UL-CA-2232331-0	ALL	PDF	493 KB
Canada, USA UL General Purpose	CoC E223176 RepRef E223176-20050829	ALL	PDF	409 KB

Tilhørende produkter: 10-****1

Accessories

	9404 10*10 Coupling
	Spring disk coupling, Very high torsion spring stiffness, Suitable up to 12.000 rpm, Well misalignment compensation, Vibration- isolating, Electrically insulatingfa

	9409 10*10 Coupling
	Bellows coupling, Backlash-free, angle synchronous rotation transmission, Very high torsion spring stiffness, Material stainless steel and anodized aluminumfa

	KW-10/10 Coupling
	Helical coupling, Universally suitable for backlash-free rotation transmission, Vibration- isolating, Optimall misalignment compensation, Medium torsion spring stiffness, Small reset forcesfa

	9101, 10 Measuring wheel
	Measuring wheel for shaft diameter 10 mm, Plastic coating, 500 mm circumferencefa

	9102, 10 Measuring wheel
	Measuring wheel for shaft diameter 10 mm, Pimpled rubber coating, 500 mm circumferencefa

	9103, 10 Measuring wheel
	Measuring wheel for shaft diameter 10 mm, Knurled aluminum, 500 mm circumferencefa

	9112, 10 Measuring wheel
	Measuring wheel for shaft diameter 10 mm, Knurled plastic, 500 mm circumferencefa

	9108, 10 Measuring wheel
	Measuring wheel for shaft diameter 10 mm, Plastic coating, 200 mm circumferencefa

	9109, 10 Measuring wheel
	Measuring wheel for shaft diameter 10 mm, Pimpled rubber coating, 200 mm circumferencefa

	9110, 10 Measuring wheel
	Measuring wheel for shaft diameter 10 mm, Knurled aluminum, 200 mm circumferencefa

	9113, 10 Measuring wheel
	Measuring wheel for shaft diameter 10 mm, Knurled plastic, 200 mm circumferencefa

	9404 6*6 Coupling
	Spring disk coupling, Very high torsion spring stiffness, Suitable up to 12.000 rpm, Well misalignment compensation, Vibration- isolating, Electrically insulatingfa

	9409 6*6 Coupling
	Bellows coupling, Backlash-free, angle synchronous rotation transmission, Very high torsion spring stiffness, Material stainless steel and anodized aluminumfa

	KW-6/6 24mm Coupling
	Helical coupling, Universally suitable for backlash-free rotation transmission, Vibration- isolating, Optimall misalignment compensation, Medium torsion spring stiffness, Small reset forcesfa

	9203 Angled flange
	Angled flangefa

	9300 Mounting bracket for servo flange
	Mounting bracket for servo flangefa

	9310-3 Synchro clamping element
	Synchro clamping elementfa

	9414A Female cordset
	fa

	9414B Female cordset
	fa

	9416 Female cordset
	Female cordsetfa

	42306A Female connector, field-attachable
	fa

	42306B Female cordset
	fa

	42308A Female cordset
	fa

	42308B Female cordset, field attachable
	fa

Generelle bemærkninger vedr. produktoplysninger fra Pepperl+Fuchs

Pepperl+Fuchs A/S
Kirkebjerg Allé 90
DK-2605 Brøndby
Denmark
info@dk.pepperl-fuchs.com
phone +45 7010 4210

Pepperl+Fuchs er markedsledende indenfor udvikling og fabrikation af elektroniske sensorer og komponenter til det globale automatiseringsmarked. Kontinuerlig innovation, kombineret med høj kvalitet og stabil vækst har sikret uafbrudt succes gennem mere end 70 år. Pepperl+Fuchs har 6.300 ansatte på verdensplan og har produktionsfaciliteter i Tyskland, USA, Singapore, Ungarn, Indonesien og Vietnam; de fleste ISO 9001 certificerede.