Support Industrielle sensorer
Support Explosion Protection
Industrielle sensorer

Ikke tilgængelig for indkøb

This product has been replaced.Go to replacement product VBA-2E-KE5-IJL/UJL

AS-Interface analog module VBA-2E-KE2-I/U-V3.0

VBA-2E-KE2-I/U-V3.0
  • Housing with removable terminals
  • Addressing jack
  • Function display for bus, internal and external sensor power supply, inputs
  • Supply of inputs external or from the module, as required

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Hent hele databladet som PDF:


Uddrag af datablad: Tekniske data for   VBA-2E-KE2-I/U-V3.0

Produkt beskrivelse
KE control cabinet module
2 analog inputs
General specifications
Node typeA/B node
AS-Interface specificationV3.0
Required gateway specification≥ V3.0
UL File NumberE223772
Indicators/operating means
LED FAULTerror display; LED red
red: communication error
red flashing: peripheral error or address 0
LED INTInternal input supply active; LED green
LED PWRAS-Interface voltage; LED green
green: AS-Interface voltage OK
green flashing: peripheral error or address 0
LED AUXext. auxiliary voltage UAUX ; LED green
LED -/OKStatus input signal; LED green
Off: Not connected (Only current module)
On: Signal within measuring range
Flashing: Signal outside measuring range
LED U/ICurrent or voltage module; Green LED
Off: Voltage input
On: Current input
Electrical specifications
Auxiliary voltage (output)24 V DC ± 15 % PELV
(protection class 3 according to VDE 0106/IEC 364-4-41)
Insulation voltage≥ 500 V
Rated operating voltage26.5 ... 31.6 V from AS-Interface
Rated operating current≤ 80 mA
Input
Input voltageFor voltage module: ≤ 25 V per input
Number/Type2 analog inputs
Current: 4 ... 20 mA
voltage: 0 ... 10 V
Supplyfrom AS-Interface or from external auxiliary voltage as required UAUX
Input currentFor current module: ≤ 40 mA per input
Input resistanceFor current module: 50 Ω
For voltage module: 100 kΩ
Switching pointChangeover current/voltage module:
current module with Iin ≥ 1 mA
voltage module with Uin ≥ 1 V
Resolution14 Bit / 1 µA (Current module) or
14 bit / 1 mV (Voltage module)
Directive conformity
Electromagnetic compatibility
Directive 2014/30/EUEN 62026-2:2013 EN 61000-6-2:2005, EN 61000-6-4:2007 EN 61131-2:2007
Standard conformity
Degree of protectionEN 60529:2000
AS-InterfaceEN 62026-2:2013
Programming instructions
ProfileS-7.A.9
IO code7
ID codeA
ID2 code9
Data bits (function via AS-Interface)The transfer of the data value is based on AS-Interface Profile 7.A.9.
Parameter bits (programmable via AS-i)function
P0mains power frequency filter
P0=1, 50 Hz filter active
P0=0, 60 Hz filter active
P1P1=1, normal operating mode
P1=0, both channels in current mode and without recognition of wire breakage
P2Message of peripheral error
P2=1, peripheral error is reported
P2=0, peripheral error is not reported
Ambient conditions
Ambient temperature0 ... 70 °C (32 ... 158 °F)
Storage temperature-25 ... 85 °C (-13 ... 185 °F)
Mechanical specifications
Degree of protectionIP20
Connectionremovable terminals
rated connection capacity:
rigid/flexible (with and without wire-end ferrules): 0.25 mm2 ... 2.5 mm2
for multiple-wire connection with two wires of equal cross-section:
flexible with twin wire-end ferrules: 0.5 mm2 ... 1.5 mm2
Material
HousingPA 66-FR
Mass350 g
Dimensions
Height85 mm
Width22.5 mm
Length99 mm
MountingDIN mounting rail

Classifications

SystemClasscode
ECLASS 13.027242601
ECLASS 12.027242601
ECLASS 11.027242601
ECLASS 10.0.127242601
ECLASS 9.027242601
ECLASS 8.027242601
ECLASS 5.127242601
ETIM 9.0EC001596
ETIM 8.0EC001596
ETIM 7.0EC001596
ETIM 6.0EC001596
ETIM 5.0EC001596
UNSPSC 12.139121535

Details: VBA-2E-KE2-I/U-V3.0

Product Documentation: VBA-2E-KE2-I/U-V3.0

Language Selection:
Brief InstructionsSprogFil typeFil størrelse
Mounting Instruction VBA-2E-KE2-I/U-V3.0 / Montageanleitung VBA-2E-KE2-I/U-V3.0ALLPDF842 KB
Manuals
Manual VBA-2E-G4-I; VBA-2E-G4-U; VBA-2A-G4-I; VBA-2A-G4-U; VBA-4E-G4-Pt100; VBA-2A-KE2-I/U; VBA-2E-KE2-I/U; VBA-2E-KE2-I/U-V3.0ENGPDF4051 KB

Design / Simulation: VBA-2E-KE2-I/U-V3.0

Language Selection:
CADSprogFil typeFil størrelse
CAD 3-D / CAD 3-DALLSTP1916 KB

Approvals: VBA-2E-KE2-I/U-V3.0

Language Selection:
CertificatesCertifikat nr.SprogFil typeFil størrelse
Canada, USA ULCoC 20141115-E223772ALLPDF342 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)DOC-2448CALLPDF109 KB

Tilhørende produkter: VBA-2E-KE2-I/U-V3.0

Accessories

AS-Interface Handheld with accessoryfa

Adapter cable module/hand-held programming devicefa
25-point wiring link for control cabinet modules with screw terminalsfa
Generelle bemærkninger vedr. produktoplysninger fra Pepperl+Fuchs
Free Download: White Paper on TCP-Based Communication Protocols (PDF)

This free PDF white paper compares the different TCP-based communication protocols (AMQP, OPC UA, MQTT, REST API) that have found their way up and are considered the enablers of IIoT and Industry 4.0. Get your free download now!

AS-Interface Switch Cabinet Module KE5 – Simple Handling and Improved Manageability

The unique housing design of the new KE5 switch cabinet module enables distinct visibility and simplifies mounting, wiring, and maintenance inside switch cabinets and junction boxes.

AS-Interface Product Range

Get to know our full range of AS-Interface products.

Pepperl+Fuchs A/S
Kirkebjerg Allé 90
DK-2605 Brøndby
Denmark
info@dk.pepperl-fuchs.com
phone +45 7010 4210

© 2024 Alle rettigheder forbeholdt.

Pepperl+Fuchs er markedsledende indenfor udvikling og fabrikation af elektroniske sensorer og komponenter til det globale automatiseringsmarked. Kontinuerlig innovation, kombineret med høj kvalitet og stabil vækst har sikret uafbrudt succes gennem mere end 70 år. Pepperl+Fuchs har 6.300 ansatte på verdensplan og har produktionsfaciliteter i Tyskland, USA, Singapore, Ungarn, Indonesien og Vietnam; de fleste ISO 9001 certificerede.