Type X and Ex pxb purge and pressurization control unit 6000 Control System

Certified for Class I, Class II, Division I; Zone 1 / Zone 21 to nonhazardous
Intrinsically safe electrical/pneumatic manifold assembly
Intrinsically safe user interface for programming and monitoring the system
Enclosure volume up to 450 ft³ (12.7 m³)
Control Unit monitors system operation and controls enclosure power
Universal mounting (brackets included)
316L stainless steel Type 4X enclosure

Technical Data
Informative Literature
Product Documentation
Design / Simulation
Approvals
Tilhørende produkter

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Hent hele databladet som PDF:

Uddrag af datablad: Tekniske data for 6000 Control System

Produkt beskrivelse
6000 Series Type X and Ex pxb purge and pressurization system control unit

General specifications
Operating mode		manual, semi-automatic, or fully automatic - programmable
Series		6000 Series
System		Type X Purge ; Ex pxb Purge
Number of volume exchanges		4 to 19
Hazardous environment		gas, dust, gas and dust
Supply
Rated voltage		90 ... 264 V AC, 48 ... 62 Hz / 0.2 A 20 ... 30 V DC
Electrical specifications
Connection		Terminal blocks
Input
Input I		Inputs 1, 2, 3, 4: contact input, 5 VDC @ 2 mA
	Input type	intrinsically safe
Input II		Temperature inputs
	Input type	intrinsically safe
	Sensor type	6000-TEMP
Input III		EPV-6000 Vent
	Input type	intrinsically safe
Input IV		User interface module
	Connection	M8 connector, 4-pin
	Input type	intrinsically safe
Output
Output I		AUX 1
	Output type	Dry contacts, SPDT
	Inrush current	5 A
	Contact loading	2 A @ 240 VAC resistive load 2 A @ 24 VDC
Output II		AUX 2
	Output type	Dry contacts, SPDT
	Inrush current	5 A
	Contact loading	2 A @ 240 VAC resistive load 2 A @ 24 VDC
Output III		ENC_1, ENC_2 (protected enclosure contacts)
	Output type	Dry contacts (2) SPST, NO
	Contact loading	8 A @ 240 VAC / 120 VAC resistive load 8 A @ 24 VDC
Indicators/settings
LED indication		Safe pressure: Blue - safe pressure is achieved Enclosure power: Green - power on; Red - power off Rapid exchange: Blue - purging is running System bypass: Yellow - bypass is activated Alarm fault: Red (blinking) - any alarm input detected; Red (solid) - 6000 series system fault
Pneumatic parameters
Protective gas supply		instrument grade air or inert gas
Pressure requirement		20 ... 120 psig (1.4 ... 8.3 bar) (138 ... 827 kPa) regulated
Safe pressure		Gas: 0.25" wc (6.4 mm wc) (0.625 mbar) (62 Pa) Dust: 0.65" wc (16.5 mm wc) (1.6 mbar) (162 Pa) Gas and Dust: 0.65" wc (16.5 mm wc) (1.6 mbar) ( 162 Pa)
Purge flow rate		Maximum flow rate measurement for enclosure size (enclosure volume:flow rate): < 20 ft³ (0.57 m³): 5, 12 SCFM (141, 340 l/min), or dynamic 20 ... 30 ft³ (0.57 ... 0.85 m³): 5, 12, 20 SCFM (141, 340, 565 l/min), or dynamic > 30 ft³ (0.85 m³): 5, 12, 20, 30 SCFM (141, 340, 565, 850 l/min), or dynamic
Purge flow and enclosure pressure rate		With EPV-6000-xx-01, EPV-6000-xx-02 5 SCFM @ 1.5" wc, (141 l/min @ 3.7 mbar) 12 SCFM @ 2.0" wc, (340 l/min @ 5.0 mbar) 20 SCFM @ 2.7" wc, (565 l/min @ 6.7 mbar) 30 SCFM @ 4.1" wc, (850 l/min @ 10.2 mbar) With EPV-6000-xx-03, EPV-6000-xx-04 5 SCFM @ 2.1" wc, (141 l/min @ 5.2 mbar) 12 SCFM @ 2.6" wc, (340 l/min @ 6.5 mbar) 20 SCFM @ 4.1" wc, (565 l/min @ 10.2 mbar) 30 SCFM @ 5.3" wc, (850 l/min @ 13.2 mbar) With EPV-6000-xx-05, 06 5 SCFM @ 1.8" wc, (141 l/min @ 4.5 mbar) 12 SCFM @ 2.9" wc, (340 l/min @ 7.3 mbar) 20 SCFM @ 7.4" wc, (565 l/min @ 18.5 mbar)
Flow rate for leakage compensation		Depends on enclosure seal. With EPV-6000-xx-01, EPV-6000-xx-02 0.35 SCFM @ 0.25" wc (10.0 l/min @ 6.3 mbar) 1.0 SCFM @ 0.75" wc (28.0 l/min @ 1.9 mbar) With EPV-6000-xx-03, EPV-6000-xx-04 0.22 SCFM @ 0.25" wc (6.2 l/min @ 6.3 mbar) 0.58 SCFM @ 0.75" wc (16.4 l/min @ 1.9 mbar) With EPV-6000-xx-05, EPV-6000-xx-06 0.15 SCFM @ 0.25" wc (4.2 l/min @ 6.3 mbar) 0.35 SCFM @ 0.75" wc (10.0 l/min @ 1.9 mbar)
Ambient conditions
Ambient temperature		-20 ... 60 °C (-4 ... 140 °F)
Storage temperature		-30 ... 80 °C (-22 ... 176 °F)
Relative humidity		5 ... 95 %, noncondensing
Vibration resistance		5 ... 100 Hz , 1 g, 12 m/s², all axes
Impact resistance		30 g, 11 ms, all axes
Mechanical specifications
Connection type		Pneumatic : Inlet fitting to manifold: 3/8" ferrule fitting Outlet fitting from manifold: 3/8" ferrule fitting Inlet fitting to enclosure: 3/8" bulkhead fitting
Cable gland		4 - M16 x 1.5 cable gland
Degree of protection		Type 4X , IP66
Material		Enclosure: 316L (UNS S31603) stainless steel Manifold valve: anodized 6082 aluminum Fittings: 316L (UNS S31603) stainless steel
Mass		-WH- 11.4 kg (25 lb) -CK- 7.2 kg (16 lb)
Dimensions		183 x 367.5 x 152.5 mm (7.20 x 14.45 x 6.00 inch)
	Height	367.5 mm
	Width	183 mm
	Depth	152.5 mm
Data for application in connection with hazardous areas
EU-type examination certificate
	Marking	6000 main control unit with housing 6000-xx-S2-UN-xx-xx: ATEX UL/Demko 07 ATEX 0705753X II 2 G Ex db ib [ib Gb] [pxb Gb] IIC T4 Gb (-20 °C ≤ Ta ≤ 60 °C) II 2 D Ex ib tb [ib Db] [pxb Db] IIIC T60°C Db (-20 °C ≤ Ta ≤ 50 °C) 6000 main control unit kit version 6000-xx-S2-UN-CK-xx: ATEX UL/Demko 07 ATEX 0705753X II 2 G Ex db [ib Gb] [pxb Gb] IIC T4 Gb (-20 °C ≤ Ta ≤ 60 °C) II 2 D Ex tb [ib Db] [pxb Db] IIIC T80°C Db (-20 °C ≤ Ta ≤ 60 °C) User interface 6000-UIC-xx: ATEX UL/Demko 07 ATEX 0705753X II 2 G Ex ib [pxb Gb] IIC T4 Gb
Directive conformity
	Directive 2014/34/EU	IEC/EN 60079-0 IEC/EN 60079-1 IEC/EN 60079-2 IEC/EN 60079-11 IEC/EN 60079-31
	Directive 94/9/EC
International approvals
UL approval		6000 Main control unit with housing 6000-xx-S2-UN-xx-xx: cULus Class I, Division 1, Groups A,B,C,D T4 (-20 °C ≤ Ta ≤ 60 °C) Class II, Division 1, Groups E,F,G T4 (-20 °C ≤ Ta ≤ 50 °C) Class I, Zone 1, Group IIC T4 (-20 °C ≤ Ta ≤ 60 °C) Class II, Zone 21, Group IIIC T60 °C (-20 °C ≤ Ta ≤ 50 °C) [Ex i] Associated Equipment Ex db ib [ib Gb] [pxb Gb] IIC T4 (-20 °C ≤ Ta ≤ 60 °C) Ex ib tb [ib Db] [pxb Db] IIIC T4 (-20 °C ≤ Ta ≤ 50 °C) 6000 Main control unit kit version 6000-xx-S2-UN-CK-xx: cULus Class I, Division 1, Groups A,B,C,D T4 (-20 °C ≤ Ta ≤ 60 °C) Class II, Division 1, Groups E,F,G T4 (-20 °C ≤ Ta ≤ 60 °C) Class I, Zone 1, Group IIC T4 Class II, Zone 21, Group IIIC T60 °C [Ex i] Associated Equipment Ex db [ib Gb] [pxb Gb] IIC T4 X (-20 °C ≤ Ta ≤ 60 °C) Ex tb [ib Db] [pxb Db] IIIC T4 X (-20 °C ≤ Ta ≤ 60 °C) User interface 6000-UIC-xx: cULus (-20 °C ≤ Ta ≤ 60 °C) Class I, Division 1, Groups A,B,C,D T4 Class I, Zone 1, Group IIC T4 Ex i Intrinsically safe
IECEx approval		6000 Main Control unit with housing 6000-xx-S2-UN-xx-xx: IECEx UL 08.0003X Ex db ib [ib Gb] [pxb Gb] IIC T4 Gb (-20 °C ≤ Ta ≤ 60 °C) Ex ib tb [ib Db] [pxb Db] IIIC T60 °C Db (-20 °C ≤ Ta ≤ 50 °C) 6000 Main control unit kit version 6000-xx-S2-UN-CK-xx: IECEx UL 08.0003X Ex db [ib Gb] [pxb Gb] IIC T4 Gb (-20 °C ≤ Ta ≤ 60 °C) Ex tb [ib Db] [pxb Db] IIIC T80 °C Db (-20 °C ≤ Ta ≤ 60 °C) User interface 6000-UIC-xx: IECEx UL 08.0003X Ex ib [pxb Gb] IIC T4 Gb
General information
Supplementary information		EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com.

Classifications

System	Classcode
ECLASS 13.0	27180508
ECLASS 12.0	27180508
ECLASS 11.0	27180508
ECLASS 10.0.1	27180508
ECLASS 9.0	27180508
ECLASS 8.0	27180508
ECLASS 5.1	40050501
ETIM 9.0	EC000243
ETIM 8.0	EC000243
ETIM 7.0	EC000243
ETIM 6.0	EC000243
ETIM 5.0	EC000243
UNSPSC 12.1	39121301

Details: 6000 Control System

Informative Literature: 6000 Control System

We are sorry, there are no documents for your language selection. Please select another language.

Product Documentation: 6000 Control System

Product information	Sprog	Fil type	Fil størrelse
Basic Explosion Protection Compendium - Type of Protection "Purge and Pressurization"	ENG	PDF	3860 KB
Brief Instructions
Programming Tree 6000 Series Purge/Pressurization System	ENG	PDF	1157 KB
Programming Worksheet 6000 Series Purge/Pressurization System	ENG	PDF	1399 KB
Safety and Security Documentation
Instruktions manual	DAN	PDF	167 KB
Manuals
Manual	ENG	PDF	10850 KB

Design / Simulation: 6000 Control System

CAD	Sprog	Fil type	Fil størrelse
2D / DXF Files for 6000 Series component kit / CAD 2-D	ALL	ZIP	1162 KB
CAD and STP drawings of 6000 Series complete unit / CAD 2-D	ALL	ZIP	6729 KB

Approvals: 6000 Control System

Certificates	Certifikat nr.	Sprog	Fil type	Fil størrelse
ATEX Certificate	DEMKO 07 ATEX 0705753X	ALL	PDF	360 KB
China SITIIAS CCC Ex Certificate	2020322304003056 (Katy, TX USA)	ALL	PDF	5433 KB
IECEx Certificate of Conformity	IECEx UL 08.0003X	ALL	LINK	---
Korea KOSHA	14-AV4BO-0083	ALL	PDF	322 KB
PESO (India) CCOE	A/P/HQ/MH/104/4757 (P383926)	ALL	PDF	103 KB
UL Hazardous Location	E184741 (RFPW, RFPW7 , RFPZ7)	ALL	PDF	741 KB
Control Drawings
Control drawing UL / Control drawing UL		ALL	PDF	711 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)	DOC-B066D	ALL	PDF	162 KB

Tilhørende produkter: 6000 Control System

Accessories

	6000-ISB-01 6000 Series intrinsically safe termination board
	Termination board for the 6000 Series Purge systempa

	EPV-6000-** 6000 Series Vent
	EPV-6000 Ventpa

Generelle bemærkninger vedr. produktoplysninger fra Pepperl+Fuchs

Hurtige links

Bebco EPS® Purge+Pressurization Technology

Get to know the smartest way to ensure hazardous location protection and configure your individual purge and pressurization system!

Download the Purge+Pressurization Simulation App

Our interactive app gives you a step-by-step programming simulation for your purge and pressurization system. Download the free-of-charge app for iOS or Android devices now …

Pepperl+Fuchs A/S
Kirkebjerg Allé 90
DK-2605 Brøndby
Denmark
info@dk.pepperl-fuchs.com
phone +45 7010 4210

Pepperl+Fuchs er markedsledende indenfor udvikling og fabrikation af elektroniske sensorer og komponenter til det globale automatiseringsmarked. Kontinuerlig innovation, kombineret med høj kvalitet og stabil vækst har sikret uafbrudt succes gennem mere end 70 år. Pepperl+Fuchs har 6.300 ansatte på verdensplan og har produktionsfaciliteter i Tyskland, USA, Singapore, Ungarn, Indonesien og Vietnam; de fleste ISO 9001 certificerede.