AS-Interface Safety Monitor VAS-4A16L-K31

Certified up to SIL 3 according to IEC 61508 and EN 62061 and up to PL_e according to EN 13849
Stainless steel housing
LC display for slave addresses and error messages
Configuration and commissioning with configuration software
2 safe output relays and 2 safe electronic outputs
2 AS-Interface networks
Memory card for configuration data

Technical Data
Product Documentation
Design / Simulation
Approvals
Software
Tilhørende produkter

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Hent hele databladet som PDF:

Uddrag af datablad: Tekniske data for VAS-4A16L-K31

Produkt beskrivelse
Safety Monitor, 16 decentralized output circuits

General specifications
AS-Interface specification		V3.0
PLC-Functionality		none
Duplicate address detection		from AS-Interface slaves
Earth fault detection		integrated
EMC monitoring		integrated
Diagnostics function		Extended function via display
Switch-on delay		< 10 s
Response delay		< 40 ms
UL File Number		E223772 only from low voltage, limited energy source (SELV or PELV) or listed Class 2 source
Functional safety related parameters
Safety Integrity Level (SIL)		SIL 3
Performance level (PL)		PL e
MTTF_d		200 a
B_10d		2 E+7
Indicators/operating means
Display		Illuminated graphical LC display for addressing and error messages
LED FAULT		Error display; red LED red: Communication error red flashing: release circuit error
LED POWER		voltage ON; LED green
LED U AS-i 1 / U AS-i 2		AS-Interface voltage - circuit 1/circuit 2; green LED
LED ready		off: - constantly lit: startup/restart lock active flashing: external test required
LED AUX		ext. auxiliary voltage U_AUX; LED green
LED EDM/Start		External device monitoring circuit inputs closed, 4x yellow LEDs
LED output circuit		Output circuit closed; 4 x green LEDs
Button		4
Electrical specifications
Insulation voltage		≥ 500 V
Rated operating voltage		26.5 ... 31.6 V from AS-Interface; 24 V _DC
Rated operating current		≤ 200 mA from 24 V_DC ≤ 45 mA from AS-Interface
Interface
Interface type		RS 232, serial
Transfer rate		19.6 kbaud, no parity, 1 start bit, 1 stop bit, 8 data bits
Interface 2
Interface type		Chip card slot
Input
Number/Type		4 EDM/Start inputs: EDM: Inputs for the external device monitoring circuits Start: start inputs: Static switching current 4 mA at 24 V, dynamic 30 mA at 24 V (T=100 μs)
Output
Safety output		Output circuits 1 and 2: 2 potential-free contacts, max. contact load: 3 A_DC-13 at 30 V_DC, 3 A_AC-15 at 30 V_AC Output circuits 3 and 4: 2 PNP transistor outputs max. contact load: 0.5 A_DC-13 at 30 V_DC
Connection
AS-Interface		spring terminals, removable
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 62026-2:2013 EN 61000-6-2:2005, EN 61000-6-4:2007
Standard conformity
Electromagnetic compatibility		EN 61000-6-2:2005, EN 61000-6-4:2007
Degree of protection		EN 60529:2000
AS-Interface		EN 62026-2:2013
Shock resistance		EN 61131-2:2004
Standards		EN 61000-6-2:2005, EN 61000-6-4:2007 EN 954-1:1996 (up to Kategorie 4), IEC 61508:2001 and EN 62061:2005 (up to SIL3) EN 13849:2008 (PL e)
Approvals and certificates
UL approval		An isolated source with a secondary open circuit voltage of ≤ 30 V_DC with a 3 A maximum over current protection. Over current protection is not required when a Class 2 source is employed. UL mark does not provide UL certification for any functional safety rating or aspects of the device.
Ambient conditions
Ambient temperature		0 ... 55 °C (32 ... 131 °F)
Storage temperature		-25 ... 85 °C (-13 ... 185 °F)
Mechanical specifications
Degree of protection		IP20
Material
	Housing	Stainless steel
Mass		800 g
Dimensions
	Height	120 mm
	Width	85 mm
	Length	89 mm
Construction type		Low profile housing , Stainless steel

Classifications

System	Classcode
ECLASS 13.0	27243101
ECLASS 12.0	27243101
ECLASS 11.0	27243101
ECLASS 10.0.1	27243101
ECLASS 9.0	27243101
ECLASS 8.0	27279215
ECLASS 5.1	27279215
ETIM 9.0	EC001449
ETIM 8.0	EC001449
ETIM 7.0	EC001449
ETIM 6.0	EC001449
ETIM 5.0	EC001449
UNSPSC 12.1	39121535

Details: VAS-4A16L-K31

Product Documentation: VAS-4A16L-K31

Product information	Sprog	Fil type	Fil størrelse
Configuring a Safe Input on AS-Interface Safety at Work	ENG	PDF	258 KB
Brief Instructions
Installation instructions VAS-4A16L-K31 / Montageanweisung VAS-4A16L-K31	ALL	PDF	1543 KB
Manuals
Manual VAS-2A1L-K31 & VAS-4A16L-K31	ENG	PDF	5570 KB
Replacing the AS-Interface consortial Safety Monitor	ENG	PDF	3164 KB

Design / Simulation: VAS-4A16L-K31

CAD	Sprog	Fil type	Fil størrelse
CAD 3-D / CAD 3-D	ALL	STP	2685 KB
CAD Portal / CAD Portal	ALL	LINK	---

Approvals: VAS-4A16L-K31

Certificates	Certifikat nr.	Sprog	Fil type	Fil størrelse
US CA UL	E223772	ALL	LINK	---

Software: VAS-4A16L-K31

Software Tools	Udgivelses info	Fil type	Fil størrelse
SISTEMA SLB Library AS-Interface Safety / SISTEMA SLB Library AS-Interface Safety		ZIP	622 KB

Tilhørende produkter: VAS-4A16L-K31

Accessories

	USB-0,8M-PVC ABG-SUBD9 Converter USB/RS 232
	Interface converter USB/RS 232fa

	VAZ-SW-SIMON+ Configuration software
	Software for configuration of K30 Master Monitors/K31 and KE4 Safety Monitorsfa

	VAZ-SIMON+-R2-1,8M-PS/2 Interface cable
	Interface cable for connecting the K30/K31 Safety Monitor to a PCfa

Generelle bemærkninger vedr. produktoplysninger fra Pepperl+Fuchs

Pepperl+Fuchs A/S
Kirkebjerg Allé 90
DK-2605 Brøndby
Denmark
info@dk.pepperl-fuchs.com
phone +45 7010 4210

Pepperl+Fuchs er markedsledende indenfor udvikling og fabrikation af elektroniske sensorer og komponenter til det globale automatiseringsmarked. Kontinuerlig innovation, kombineret med høj kvalitet og stabil vækst har sikret uafbrudt succes gennem mere end 70 år. Pepperl+Fuchs har 6.300 ansatte på verdensplan og har produktionsfaciliteter i Tyskland, USA, Singapore, Ungarn, Indonesien og Vietnam; de fleste ISO 9001 certificerede.