Multiturn absolute rotary encoder FSM58

Industrial standard housing ∅58 mm
25-bit multiturn
Output code: gray and binary
Short-circuit proof push-pull output
Inputs for selecting counting direction, LATCH, and PRESET
Code change frequency up to 400 kHz
Recessed hollow shaft

Technical Data
Product Documentation
Approvals
Tilhørende produkter

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Hent hele databladet som PDF:

Uddrag af datablad: Tekniske data for FSM58

Electrical specifications
Operating voltage		10 ... 30 V DC
No-load supply current		max. 140 mA
Power consumption		≤ 2.5 W , without output drivers
Linearity		± 0.5 LSB
Output code		Gray code, binary code
Code course (counting direction)		cw ascending (clockwise rotation, code course ascending)
Code preparation time		0.3 ms
Interface
Interface type		Push-pull, parallel , short-circuit protected
Resolution
	Multiturn	25 Bit
Load current		20 mA
Voltage drop		≤ 2.5 V
Signal voltage
	High	operating voltage minus voltage drop
	Low	≤ 2.8 V
Rise time		300 ns
De-energized delay		300 ns
Code change frequency		400 kHz
Input 1
Input type		Selection of counting direction (cw/ccw)
Signal voltage
	High	10 ... 30 V
	Low	0 ... 2 V
Input current		< 6 mA
Signal duration		min. 10 ms
Switch-on delay		≥ 1 ms
Switch-off delay		≥ 1 ms
Input 2
Input type		Temporary storage (LATCH)
Signal voltage
	High	10 ... 30 V
	Low	0 ... 2 V
Input current		< 6 mA
Signal duration		min. 100 µs
Switch-on delay		< 0.1 ms
Switch-off delay		< 0.1 ms
Input 3
Input type		zero-set (PRESET)
Signal voltage
	High	10 ... 30 V
	Low	0 ... 2 V
Input current		< 6 mA
Signal duration		min. 10 ms
Switch-on delay		< 1 ms
Connection
Connector		type 9426, 26-pin
Cable		∅9 mm, 15 x 2 x 0.14 mm², 2 m
Standard conformity
Degree of protection		DIN EN 60529, IP65
Climatic testing		DIN EN 60068-2-3, no moisture condensation
Emitted interference		EN 61000-6-4:2007
Noise immunity		EN 61000-6-2:2005
Shock resistance		DIN EN 60068-2-27, 100 g, 6 ms
Vibration resistance		DIN EN 60068-2-6, 10 g, 10 ... 2000 Hz
Approvals and certificates
UL approval		cULus Listed, General Purpose, Class 2 Power Source
Ambient conditions
Operating temperature		-40 ... 85 °C (-40 ... 185 °F) cable models: -30 ... 70 °C (fixed installation) -5 ... 70 °C (movable installation)
Storage temperature		-40 ... 85 °C (-40 ... 185 °F) (cable models: -5 ... 70 °C)
Mechanical specifications
Material
	Combination 1	housing: powder coated aluminum flange: aluminum shaft: stainless steel
	Combination 2 (Inox)	housing: stainless steel flange: stainless steel shaft: stainless steel
Mass		approx. 400 g (combination 1) approx. 800 g (combination 2)
Rotational speed		max. 12000 min ^-1
Moment of inertia		30 gcm²
Starting torque		≤ 5 Ncm

Classifications

System	Classcode
ECLASS 13.0	27270502
ECLASS 12.0	27270502
ECLASS 11.0	27270502
ECLASS 10.0.1	27270502
ECLASS 9.0	27270502
ECLASS 8.0	27270502
ECLASS 5.1	27270502
ETIM 9.0	EC001486
ETIM 8.0	EC001486
ETIM 7.0	EC001486
ETIM 6.0	EC001486
ETIM 5.0	EC001486
UNSPSC 12.1	39121527

Details: FSM58

Product Documentation: FSM58

Brief Instructions	Sprog	Fil type	Fil størrelse
Instruction leaflet / Beipackzettel	ALL	PDF	231 KB

Approvals: FSM58

Certificates	Certifikat nr.	Sprog	Fil type	Fil størrelse
US CA UL	CoC 20190913-E223176 RptRef E223176-20081013	ALL	PDF	280 KB

Tilhørende produkter: FSM58

Accessories

	9426 Female cordset
	fa

	ACC-PACK-ABS-_S_58 ø15 Torque rest
	Accessory kit for ∅58 absolute rotary encoder with recessed hollow shaft 15 mmfa

	ACC-PACK-ABS-_S_58 ø14 Torque rest
	Accessories set for ∅58 absolute rotary encoder with recessed hollow shaft 14 mmfa

	ACC-PACK-ABS-_S_58 ø12 Torque rest
	Accessories set for ∅58 absolute rotary encoder with recessed hollow shaft 12 mmfa

	ACC-PACK-ABS-_S_58 ø10 Torque rest
	Accessory kit for ∅58 absolute rotary encoder with recessed hollow shaft 10 mmfa

Generelle bemærkninger vedr. produktoplysninger fra Pepperl+Fuchs

ENA58IL Magnetic Rotary Encoder – Explore the New Benchmark for Industry Standard Rotary Encoders.

Magnetic Precision. Under any Condition. - Magnetic Encoder Technology by Pepperl+Fuchs

Pepperl+Fuchs A/S
Kirkebjerg Allé 90
DK-2605 Brøndby
Denmark
info@dk.pepperl-fuchs.com
phone +45 7010 4210

Pepperl+Fuchs er markedsledende indenfor udvikling og fabrikation af elektroniske sensorer og komponenter til det globale automatiseringsmarked. Kontinuerlig innovation, kombineret med høj kvalitet og stabil vækst har sikret uafbrudt succes gennem mere end 70 år. Pepperl+Fuchs har 6.300 ansatte på verdensplan og har produktionsfaciliteter i Tyskland, USA, Singapore, Ungarn, Indonesien og Vietnam; de fleste ISO 9001 certificerede.