Switch Amplifier HiC2851

1-channel isolated barrier
24 V DC supply (bus powered)
Input for approved dry contacts or SN/S1N sensors
Usable as signal splitter (1 input and 2 outputs)
Active voltage output
Passive transistor output (resistive acc. to EN 60947-5-6)
Line fault detection (LFD)
Line fault transparency (LFT)
Up to SIL 3 acc. to IEC/EN 61508

Technical Data
Product Documentation
Design / Simulation
Approvals

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Hent hele databladet som PDF:

Uddrag af datablad: Tekniske data for HiC2851

General specifications
Signal type		Digital Input
Functional safety related parameters
Safety Integrity Level (SIL)		SIL 3
Systematic capability (SC)		SC 3
Supply
Connection		SL1: 1a(-), 1b(-); 2a(+), 2b(+)
Rated voltage		19 ... 30 V DC bus powered via Termination Board
Ripple		≤ 10 %
Rated current		≤ 55 mA
Power dissipation		≤ 800 mW
Power consumption		≤ 1300 mW
Input
Connection side		field side
Connection		SL2: 5a(+), 5b(-)
Open circuit voltage/short-circuit current		approx. 8.4 V DC / approx. 11.9 mA
Switching point/switching hysteresis		2.1 ... 2.8 mA / approx. 0.3 mA
Line fault detection		breakage I ≤ 0.15 mA , short-circuit I ≥ 8.5 mA
Lead resistance		max. 50 Ω , consider capacitances and inductances
Switching point		1-signal: I > 2.8 mA 0-signal: I < 2.1 mA
Response delay		≤ 1 ms
Output
Connection side		control side
Connection		SL1: 8a(+), 7a(-); 10a(+), 9a(-)
Rated voltage		output II: typ. 8 V DC, max. 22 V DC
Output I		active voltage output, short-circuit proof 0-signal: 0 V 1-signal: 20 ... 31 V DC at max. 15 mA fault: 0 V
Output II		passive transistor output (resistive) 0-signal: 14 kΩ ± 10 % 1-signal: 1.8 kΩ ± 10 % fault: > 100 kΩ
Fault indication output
Connection		SL1: 6b
Output type		open collector transistor (internal fault bus)
Transfer characteristics
Switching frequency
	Output I	≤ 50 Hz
	Output II	≤ 50 Hz
Galvanic isolation
Output/power supply		functional insulation acc. to IEC 62103, rated insulation voltage 50 V_eff
Output/Output		functional insulation acc. to IEC 62103, rated insulation voltage 50 V_eff
Indicators/settings
Display elements		LEDs
Labeling		space for labeling at the front
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Conformity
Electromagnetic compatibility		EN IEC 61326-3-2:2018 , NE 21:2017 For further information see system description.
Degree of protection		IEC 60529:2001
Ambient conditions
Ambient temperature		-20 ... 60 °C (-4 ... 140 °F)
Mechanical specifications
Degree of protection		IP20
Mass		approx. 105 g
Dimensions		12.5 x 106 x 128 mm (0.5 x 4.2 x 5.1 inch) (W x H x D)
	Height	106 mm
	Width	12.5 mm
	Depth	128 mm
Mounting		on termination board
Coding		pin 1 and 2 trimmed For further information see system description.
Data for application in connection with hazardous areas
EU-type examination certificate		BASEEFA 07 ATEX 0302X
	Marking	II (1)G [Ex ia] IIC , II (1) D [Ex ia] IIIC , I (M1) [Ex ia] I
	Input	Ex ia
	Voltage	10.5 V
	Current	17.1 mA
	Power	45 mW (linear characteristic)
Supply
	Maximum safe voltage	253 V AC (Attention! U_m is no rated voltage.)
Output
	Maximum safe voltage	253 V AC (Attention! U_m is no rated voltage.)
Certificate		PF 09 CERT 1440 X
	Marking	II 3G Ex nA IIC T4 Gc
Galvanic isolation
	Input/Output	safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
	Input/power supply	safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
Directive conformity
	Directive 2014/34/EU	EN IEC 60079-0:2018+AC:2020 , EN 60079-11:2012 , EN 60079-15:2010
International approvals
FM approval
	Control drawing	16-534FM-12 (cFMus)
UL approval		E106378
	Control drawing	116-0364
IECEx approval
	IECEx certificate	IECEx BAS 07.0097X
	IECEx marking	[Ex ia Ga] IIC, [Ex ia] IIIC , [Ex ia] I
General information
Supplementary information		Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

Classifications

System	Classcode
ECLASS 13.0	27210121
ECLASS 12.0	27210121
ECLASS 11.0	27210121
ECLASS 10.0.1	27210121
ECLASS 9.0	27210121
ECLASS 8.0	27210121
ECLASS 5.1	27210121
ETIM 9.0	EC001485
ETIM 8.0	EC001485
ETIM 7.0	EC001485
ETIM 6.0	EC001485
ETIM 5.0	EC001485
UNSPSC 12.1	32101514

Details: HiC2851

Product Documentation: HiC2851

Safety and Security Documentation	Sprog	Fil type	Fil størrelse
Instruktions manual	DAN	PDF	164 KB
Safety Manual	ENG	PDF	328 KB
Manuals
System Manual	ENG	PDF	5438 KB

Design / Simulation: HiC2851

CAD	Sprog	Fil type	Fil størrelse
CAD 3-D / CAD 3-D	ALL	STP	2770 KB
CAD Portal / CAD Portal	ALL	LINK	---
CAE
EPLAN macros H-System devices (EMA) / EPLAN-Makros Geräte H-System (EMA)	ALL	ZIP	3536 KB

Approvals: HiC2851

Certificates	Certifikat nr.	Sprog	Fil type	Fil størrelse
Baseefa IECEx Certificate of Conformity	IECEx BAS 07.0097X	ALL	LINK	---
Canada FM	CoC 3033219C	ALL	PDF	682 KB
China SITIIAS CCC Ex Certificate	2021322316004125 (Singapore)	ALL	PDF	988 KB
Europe Baseefa ATEX Category (M1) ATEX Category (1) GD	Baseefa 07 ATEX 0302X	ALL	PDF	1615 KB
Europe Pepperl+Fuchs ATEX Category 3 G Certificate	PF 09 CERT 1440 X	ALL	PDF	208 KB
South Africa MASC	MASC MS/17-0853X	ALL	PDF	762 KB
USA Canada UL Hazardous Location Certificate of Compliance cULus UL E106378	CoC 20130429 - E106378 RepRef 20130429	ALL	PDF	425 KB
USA FM	CoC 3033219	ALL	PDF	678 KB
United Arab Emirates SGS Gulf Limited ECASEx	24-02-101831/E24-02-105329/NB0002	ALL	PDF	603 KB
exida Functional Safety Assessment	P+F 08/03-32R1C V2R1	ALL	PDF	456 KB
Control Drawings
Control drawing UL / Control drawing UL		ALL	PDF	154 KB
Control drawing FM / Control drawing FM		ALL	PDF	112 KB
Declaration of Conformity
EU Declaration of Conformity (P+F)	TDOC-0034FDAN	DAN	PDF	181 KB

Generelle bemærkninger vedr. produktoplysninger fra Pepperl+Fuchs

Hurtige links

Selector for Safety Products

Choose from various selection criteria like safety integrity level, performance level, device function, and signal type and find the SIL/PL assessed device that you are looking for.

Pepperl+Fuchs A/S
Kirkebjerg Allé 90
DK-2605 Brøndby
Denmark
info@dk.pepperl-fuchs.com
phone +45 7010 4210

Pepperl+Fuchs er markedsledende indenfor udvikling og fabrikation af elektroniske sensorer og komponenter til det globale automatiseringsmarked. Kontinuerlig innovation, kombineret med høj kvalitet og stabil vækst har sikret uafbrudt succes gennem mere end 70 år. Pepperl+Fuchs har 6.300 ansatte på verdensplan og har produktionsfaciliteter i Tyskland, USA, Singapore, Ungarn, Indonesien og Vietnam; de fleste ISO 9001 certificerede.