Stationary read device OPC120W-F200-R2-Ex

Explosion protection for use in Zone 1, Zone 2, Zone 21 and Zone 22
Reads 1-D and 2-D codes at high speeds of up to 6 m/s at 30 readings/s
High depth of focus
Code quality index output
Logo comparison
Presence detection

Technical Data
Product Documentation
Design / Simulation
Approvals
Software
Tilhørende produkter

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Hent hele databladet som PDF:

Uddrag af datablad: Tekniske data for OPC120W-F200-R2-Ex

Produkt beskrivelse
Stationary read device for hazardous area

General specifications
Light type		Integrated LED lightning (white)
Symbologies		Data Matrix, Code 39, Code 128, Int 2 of 5, EAN13, Pharmacode
Read distance		60 ... 160 mm Nominal distance: 120 mm
Reading field		Minimum read field: 28 mm x 45 mm Read field at nominal distance: 44 mm x 70 mm Maximum read field: 60 mm x 95 mm
Modul size		Minimum module size: 0.3 mm
Evaluation frequency		up to 30 Hz
Target velocity		triggered max. 6 m/s
Data Matrix
	Symbol size	rectangular up to 144 x 144 modules rectangular up to 16 x 48 modules
	Data format	ASCII, C40, Text, X12, Edifact, Base 256 , all according to ISO 646
	Orientation	omnidirectional
Nominal ratings
Camera
	Type	CMOS , Global shutter
	Number of pixels	752 x 480 pixels
	Gray scale	256
	Image recording	real-time , Program-controlled or triggered externally
Functional safety related parameters
MTTF_d		40.5 a
Mission Time (T_M)		8 a
Diagnostic Coverage (DC)		0 %
Indicators/operating means
Operation indicator		LED green: Ready for operation
LED indication		for good/poor reading
Electrical specifications
Operating voltage		24 V DC ± 15% , PELV
No-load supply current		max. 250 mA
Power consumption		6 W
Interface
Interface type		serial , RS 232
Transfer rate		max. 115.2 kBit/s
Cable length		max. 30 m
Interface 1
Interface type		Ethernet
Protocol		TCP/IP
Transfer rate		100 MBit/s
Cable length		max. 30 m
Input
Input voltage		to be applied externally 24 V ± 15% PELV
Number/Type		Trigger
Input current		approx. 10 mA at 24 V DC
Switching threshold		low: < 10 V, high: > 15 V
Cable length		max. 30 m
Output
Number/Type		GOOD, BAD, Matchcode
Switching type		PNP
Switching voltage		to be applied externally 24 V ± 15 % PELV
Switching current		100 mA each output
Cable length		max. 30 m
Compliance with standards and directives
Standard conformity
	Noise immunity	EN 61326-1
	Emitted interference	EN 61000-6-4
	Degree of protection	EN 60529
	Laser class	IEC 60825-1:2007
Approvals and certificates
IECEx approval		IECEx INE 14.0042X
ATEX approval		INERIS 14 ATEX 0035X Device type: GUBW1.D.OS-OPC120W-F200-R2
	Marking	II 2 GD Ex db IIC T6 Gb Ex tb IIIC T85°C Db
Ambient conditions
Ambient temperature		0 ... 37 °C (32 ... 98.6 °F)
Mechanical specifications
Connection type		Connection terminals, max. conductor cross-section 2.5 mm²
Conductor cross section		0.13 ... 2.5 mm²
Cable gland		3 ... 8.5 mm
Enclosure cover		threaded round cover
Cover fixing		flamepath thread
Cover seal		none, O-ring for IP66/67
Flamepath grease		petroleum jelly
Degree of protection		IP66 (IP66/IP67 with O-ring)
Material
	Enclosure	aluminum alloy
	Glass	thermo-resistant tempered glass
	Finish	epoxy coated RAL 7005 (grey)
Mass		approx. 7 kg
Dimensions
	Height	279 mm
	Width	202 mm
	Depth	134 mm
Grounding		M6 external grounding points

Classifications

System	Classcode
ECLASS 13.0	27280103
ECLASS 12.0	27280103
ECLASS 11.0	27280103
ECLASS 10.0.1	27280103
ECLASS 9.0	27280103
ECLASS 8.0	27280103
ECLASS 5.1	27280103
ETIM 9.0	EC002999
ETIM 8.0	EC002999
ETIM 7.0	EC002999
ETIM 6.0	EC002999
ETIM 5.0	EC002999
UNSPSC 12.1	43211701

Details: OPC120W-F200-R2-Ex

Product Documentation: OPC120W-F200-R2-Ex

Manuals	Sprog	Fil type	Fil størrelse
Manual optical print inspector OPC / OPD / OPE	ENG	PDF	3691 KB

Design / Simulation: OPC120W-F200-R2-Ex

CAD	Sprog	Fil type	Fil størrelse
CAD 3-D / CAD 3-D	ALL	STP	834 KB
CAD Portal / CAD Portal	ALL	LINK	---
CAE
CAE EPLAN Data Portal / CAE EPLAN Data Portal	ALL	LINK	---
CAE EPLAN macro EDZ / CAE EPLAN Makro EDZ	ALL	EDZ	88 KB

Approvals: OPC120W-F200-R2-Ex

Certificates	Certifikat nr.	Sprog	Fil type	Fil størrelse
Europe INERIS ATEX	INERIS 14 ATEX 0035X	ALL	PDF	529 KB
Worldwide INERIS IECEx Certificate of Conformity	IECEx INE 14.0042X	ALL	LINK	---
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)	DOC-4742	ALL	PDF	97 KB

Software: OPC120W-F200-R2-Ex

Software Tools	Udgivelses info	Fil type	Fil størrelse
Software Vision Configurator / Software Vision Configurator	V6.7.0	ZIP	65423 KB
VSX-Interface libraries for communication with VSX sensors / Libraries zur Kommunikation mit VSX-Sensoren	V6.0.02.4945	ZIP	18196 KB

Tilhørende produkter: OPC120W-F200-R2-Ex

Accessories

	V45-G-C5-GN3M-PUR-E1S Cable connector, Ethernet
	Ethernet bus cable male cordset single-ended RJ45, 4-pin, PUR cable green, Cat5e, shielded, drag chain suitablefa

	V1SD-G-GN2M-PUR-E1S-V45-G Connection cable, Ethernet
	Ethernet bus cable M12 plug straight D-coded to RJ45 Ethernet-coded, 4-pin, PUR cable green, Cat5e, shielded, drag chain suitablefa

Generelle bemærkninger vedr. produktoplysninger fra Pepperl+Fuchs

Optical Identification Systems

From 2-D code readers and handhelds to barcode scanners and special solutions—find the ideal solution for your optical identification task.

Yderligere Information

Pepperl+Fuchs A/S
Kirkebjerg Allé 90
DK-2605 Brøndby
Denmark
info@dk.pepperl-fuchs.com
phone +45 7010 4210

Pepperl+Fuchs er markedsledende indenfor udvikling og fabrikation af elektroniske sensorer og komponenter til det globale automatiseringsmarked. Kontinuerlig innovation, kombineret med høj kvalitet og stabil vækst har sikret uafbrudt succes gennem mere end 70 år. Pepperl+Fuchs har 6.300 ansatte på verdensplan og har produktionsfaciliteter i Tyskland, USA, Singapore, Ungarn, Indonesien og Vietnam; de fleste ISO 9001 certificerede.