Optical reading head PXV100-F200-R4-V19

RS-485 interface
Non-contact positioning on Data Matrix code tape
Mechanically rugged: no wearing parts, long operating life, maintenance-free
High resolution and precise positioning, especially for facilities with curves and switch points as well as inclines and declines.
Travel ranges up to 10 km

Technical Data
Product Documentation
Design / Simulation
Approvals
Software
Tilhørende produkter

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Hent hele databladet som PDF:

Uddrag af datablad: Tekniske data for PXV100-F200-R4-V19

Produkt beskrivelse
Read head for incident light positioning system

General specifications
Passage speed		≤ 8 m/s
Measuring length		max. 10000 m
Light type		Integrated LED lightning (red)
Scan rate		40 s^-1
Read distance		100 mm
Depth of focus		± 50 mm
Reading field		115 mm x 73 mm
Ambient light limit		100000 Lux
Accuracy		± 0.2 mm
Nominal ratings
Camera
	Type	CMOS , Global shutter
Processor
	Clock pulse frequency	600 MHz
	Speed of computation	4800 MIPS
	Digital resolution	32 Bit
Functional safety related parameters
MTTF_d		98 a
Mission Time (T_M)		20 a
Diagnostic Coverage (DC)		0 %
Indicators/operating means
LED indication		7 LEDs (communication, alignment aid, status information)
Electrical specifications
Operating voltage		15 ... 30 V DC , PELV
No-load supply current		max. 200 mA
Power consumption		3 W
Interface
Interface type		RS-485 - Interface
Data output code		binary code
Transfer rate		38400 ... 230400 Bit/s
Termination		Switchable terminal resistor
Query cycle time		≥ 10 ms
Interface 2
Interface type		USB Service
Input
Input type		1 to 3 functional inputs , programmable
Input impedance		≥ 27 kΩ
Output
Output type		1 to 3 switch outputs , PNP , programmable , short-circuit protected
Switching voltage		Operating voltage
Switching current		150 mA each output
Standard conformity
Emitted interference		EN 61000-6-4:2007+A1:2011
Noise immunity		EN 61000-6-2:2005
Shock resistance		EN 60068-2-27:2009
Vibration resistance		EN 60068-2-6:2008
Approvals and certificates
CE conformity		CE
UL approval		cULus Listed, Class 2 Power Source, Type 1 enclosure
CCC approval		CCC approval / marking not required for products rated ≤36 V
Ambient conditions
Operating temperature		0 ... 60 °C (32 ... 140 °F) , -20 ... 60 °C (-4 ... 140 °F) (noncondensing; prevent icing on the lens!)
Storage temperature		-20 ... 85 °C (-4 ... 185 °F)
Relative humidity		90 % , noncondensing
Mechanical specifications
Connection type		8-pin, M12 x 1 connector
Degree of protection		IP67
Material
	Housing	PC/ABS
Mass		approx. 160 g
Dimensions
	Height	70 mm
	Width	70 mm
	Depth	50 mm
Factory settings
X resolution (protocol)		1 mm
Y resolution (protocol)		1 mm
Code tape orientation		0 °
Address		0
Baud rate		115200 Bd
Bus termination		ON
"No Position" X value		0
"No Position" Y value		0
"No Position" speed value		127
Overspeed threshold (protocol)		12.5 m/s
X value in case of error		Error number
Y value in case of error		Error number
Speed value in case of error		Error number
Code tape width		one-rowed
X positon offset		0 mm
Function input/output		inactive

Classifications

System	Classcode
ECLASS 13.0	27270918
ECLASS 12.0	27270918
ECLASS 11.0	27270701
ECLASS 10.0.1	27270701
ECLASS 9.0	27270701
ECLASS 8.0	27270701
ECLASS 5.1	27270701
ETIM 9.0	EC004672
ETIM 8.0	EC002999
ETIM 7.0	EC002999
ETIM 6.0	EC002999
ETIM 5.0	EC001852
UNSPSC 12.1	43211711

Details: PXV100-F200-R4-V19

Product Documentation: PXV100-F200-R4-V19

Manuals	Sprog	Fil type	Fil størrelse
Manual	ENG	PDF	3199 KB

Design / Simulation: PXV100-F200-R4-V19

CAD	Sprog	Fil type	Fil størrelse
CAD 3-D / CAD 3-D	ALL	STP	2086 KB
CAD Portal / CAD Portal	ALL	LINK	---
CAE
CAE EPLAN Data Portal / CAE EPLAN Data Portal	ALL	LINK	---
CAE EPLAN macro EDZ / CAE EPLAN Makro EDZ	ALL	EDZ	106 KB

Approvals: PXV100-F200-R4-V19

Certificates	Certifikat nr.	Sprog	Fil type	Fil størrelse
Canada, USA UL Ordinary Location	UL File: E87056, Vol. 6, Sec. 3	ALL	PDF	281 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)	DOC-3820D	ALL	PDF	134 KB
UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F)	DOC-6639A	ALL	PDF	132 KB

Software: PXV100-F200-R4-V19

Software Tools	Udgivelses info	Fil type	Fil størrelse
Software Vision Configurator / Software Vision Configurator	V6.7.0	ZIP	65423 KB

Tilhørende produkter: PXV100-F200-R4-V19

Matching System Components

	VPH-F200-T Climate control housing
	Climate control housing to extend the temperature range of the sensor used, over temperature protection, Thermostatic regulationfa

Matching System Components

	PXV-CA25- Code tape
	Data Matrix code tape, High chemical resistance, Low weight, Self-adhesive mounting, High temperature resistance, High mechanical stabilityfa

	PXV-CAM Metal code bar
	DataMatrix metal code bars for positioning PXV read heads with red illumination, High temperature resistance, High mechanical stability, Easily exchangeable, Chemically highly resistantfa

Accessories

	V19-G-ABG-PG9 Female connector, field-attachable
	Female connector M12 straight A-coded 8-pin, for cable diameter 5 - 8 mm, shielded, field-attachablefa

	PCV-AG100 Alignment guide
	Alignment guide for readerfa

	PCV-USB-RS485-Converter Set Interface converter
	USB to RS 485 interface converter, Extension cable 0.8 m in scope of delivery, Power supply for 95 - 230 V AC, For RS485fa

	PCV-KBL-V19-STR-RS485 Cable unit
	Cable unit with power supply for USB / RS-485 interface converter , Power supply for 95 - 230 V ACfa

	V19-G-ABG-PG9-FE Field attachable female cordset with earth clamp
	Female connector, M12, 8-pin, shielded, field attachablefa

	PCV-SC12 Grounding clip
	Grounding clip for PCV system, Stainless steel version, Low weight, M12 plug connection, High mechanical stabilityfa

	PCV-LM25 Marker head
	Marker head for 25 mm code tape, For 25 mm code tapes, Can be used for PCV80..., PCV100..., and PCV130... readers, Includes 2 x edding® 3000 permanent markersfa

	PCV-MB1 Mounting bracket
	Mounting bracket for PCV* read headfa

	Vision Configurator Software
	Operating software for camera-based sensorsfa

	PXV-CM25---SET Event marker
	Event markers for the PXV system, High chemical resistance, Low weight, Self-adhesive mounting, High temperature resistance, High mechanical stabilityfa

Generelle bemærkninger vedr. produktoplysninger fra Pepperl+Fuchs

Discover more positioning systems from Pepperl+Fuchs

In addition to camera-based positioning systems, Pepperl+Fuchs provides you with optical and inductive positioning systems. Learn more about these technologies and the possibilities they offer.

Quick help needed?

Pepperl+Fuchs A/S
Kirkebjerg Allé 90
DK-2605 Brøndby
Denmark
info@dk.pepperl-fuchs.com
phone +45 7010 4210

Pepperl+Fuchs er markedsledende indenfor udvikling og fabrikation af elektroniske sensorer og komponenter til det globale automatiseringsmarked. Kontinuerlig innovation, kombineret med høj kvalitet og stabil vækst har sikret uafbrudt succes gennem mere end 70 år. Pepperl+Fuchs har 6.300 ansatte på verdensplan og har produktionsfaciliteter i Tyskland, USA, Singapore, Ungarn, Indonesien og Vietnam; de fleste ISO 9001 certificerede.