Select Your Country
HiCTB16-FBM-RAC-SC-DO16 Termination Board
Key Benefits at a Glance
- System board for Schneider, Foxboro FBM series
- For 16 modules
- For 16-channel DO card FBM242c
- 24 V DC supply
- Recommended modules: HiC2871A (DO), HiC2883 (DO)
- Hazardous area: screw terminals, blue
- Non-hazardous area: Sub-D connector (male), 37-pin
Show more
Note
All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
EN
- DE
- EN
- ES
- FR
- PL
Technical data of HiCTB16-FBM-RAC-SC-DO16
| Connection | X20: terminals 3, 5(+); 4, 6(-) | |
| Nominal voltage | 24 V DC , in consideration of rated voltage of used isolators | |
| Voltage drop | 0.9 V , voltage drop across the series diode on the termination board must be considered | |
| Ripple | ≤ 10 % | |
| Fusing | 4 A , in each case for 16 modules | |
| Power dissipation | ≤ 500 mW , without modules | |
| Reverse polarity protection | yes |
| Supply | Redundancy available. The supply for the isolators is decoupled, monitored and fused. |
| Connection | X20: terminals 1, 2 | |
| Output type | volt-free contact | |
| Switch behaviour | no fault: relay contact closed power supply fault: relay contact open module fault: relay contact open | |
| Contact loading | 30 V DC, 1 A |
| Display elements | LED PWR1 (termination board power supply), green LED LED PWR2 (termination board power supply), green LED LED FAULT (fault indication), red LED - LED lits: module fault - LED flashes: power supply fault |
| Electromagnetic compatibility | |||||
| |||||
| Electromagnetic compatibility | NE 21:2017 For further information see system description. | |
| Degree of protection | IEC 60529:2001 |
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) | |
| Storage temperature | -40 ... 70 °C (-40 ... 158 °F) |
| Degree of protection | IP20 | |||||||||||||
| Connection | ||||||||||||||
| ||||||||||||||
| Core cross section | screw terminals: 0.25 ... 1.5 mm2 (24 ... 12 AWG) | |||||||||||||
| Material | housing: polycarbonate, 10 % glass fiber reinforced | |||||||||||||
| Mass | approx. 720 g | |||||||||||||
| Dimensions | 216 x 200 x 163 mm (8.5 x 7.9 x 6.42 inch) (W x H x D) , depth including module assembly | |||||||||||||
| ||||||||||||||
| Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 | |||||||||||||
| EU-type examination certificate | CESI 06 ATEX 022 | ||||
| |||||
| Non-hazardous area | |||||
| |||||
| Galvanic isolation | |||||
| |||||
| Directive conformity | |||||
| |||||
II (1)G [Ex ia Ga] IIC | UL approval | E106378 | |||||||
| ||||||||
| IECEx approval | ||||||||
| ||||||||
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |