Select Your Country

Go to global website

  1. gb
  2. Products
  3. Industrial Communication and Interfaces
  4. Displays and Signal Processing
  5. Process Displays
  6. DA6-IU-2K-V

DA6-IU-2K-V Process control and indication equipment

Key Benefits at a Glance

  • 2 adjustable trip values
  • 2 relay outputs
  • Operation via keypad
  • Characteristic programmable via 12 interpolation points
  • Resetting the outputs, automatic, manual or with external signal
  • Connection via plug-in screw terminals
  • Auxiliary power output for sensors
  • Degree of protection IP65 in accordance with DIN EN 60529 (front only)
  • System hum suppression

Show more

Contact us
Preferred Type
Product photo: Process control and indication equipment DA6-IU-2K-V
Dimensions: Process control and indication equipment DA6-IU-2K-V
Product photo: Process control and indication equipment DA6-IU-2K-V
Dimensions: Process control and indication equipment DA6-IU-2K-V
Product Compliance: Europe – CE
Note

All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

EN
  • DE
  • EN
  • ES
  • FR
DatasheetClassificationProduct DocumentationApprovals

Technical data of DA6-IU-2K-V

Process control and indication equipment
Pre-selection2-fold
Data storage> 10 years, EEPROM
Programmingkeypad-driven menu
Type14-segment LED display, red
Number of digits6
Display valuedigit height 14 mm
Key interlockwith "high"-level at terminal "KEY"
Display interval-199999 ... 999999
with suppression of leading zeros
Decimal pointfreely adjustable
Resolution15 Bit
Scale factorvia characteristic curve with up to 12 value pairs
Resetmanually or external
FusingT 0.1 A
Operating voltageUB90 ... 260 V AC
Power consumptionP09 VA
Impedance> 1 MΩ for voltage measurement
< 50 Ω for current measurement
Analog voltage input0 ... 10 V / 2 ... 10 V DC,
-10 ... 10 V DC
Analog current input0 ... 20 mA / 4 ... 20 mA
Relaychangeover contact
Switching voltagemax. 250 V AC / 125 V DC
min. 5 V AC / 5 V DC
Switching currentmax. 5 A AC / 5 A DC
min. 10 mA DC
Switching powermax. 1250 VA / 150 W
Sensor supply24 V DC ± 15 % , 30 mA
15 V DC ± 1 %, 25 mA
Directive conformity
EMC Directive 2004/108/ECEN 61000-6-2:2006 (With shielded signal and control lines)
DIN EN 55011:2009, Class B
Standard conformity
Galvanic isolationEN 61010-1:2010
Degree of protectionEN 60529:1991 + A1:2000
Shock and impact resistanceEN 60068-2-27:2009
EN 60068-2-29:1995
Vibration resistanceEN 60068-2-6:2008
Ambient temperature-10 ... 50 °C (14 ... 122 °F)
Storage temperature-20 ... 70 °C (-4 ... 158 °F)
Relative humidity≤ 80 % (noncondensing)
Degree of protectionIP65 (front)
Connection8-pin and 9-pin connectors with screw terminals
Mass180 g
Dimensions96 mm x 48 mm x 102 mm
Mountingmounting frame with latch fastener
General Notes
Ask an expert

We value your privacy!

We and our partners are using technologies like cookies and process personal data like the IP-address or browser information in order to personalize the advertising that you see. This helps us to show you more relevant ads and improves your internet experience. We also use it in order to measure results or align our website content. Because we value your privacy, we are herewith asking for your permission to use these technologies. You can always change/withdraw your consent later by clicking on the settings button on the left lower corner of the page.

Deny all cookies