Select Your Country
ICA-16DIO-G16-IO I/O hub
Key Benefits at a Glance
- IO-Link Class A
- IO-Link 1.1.4
- LED for switching state and fault indication
- Configuration and control via IO-Link
- Supply from IO-Link
- 16 digital inputs/outputs can be configured
Show more






Note
All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
EN
- DE
- EN
- FR
Technical data of ICA-16DIO-G16-IO
I/O hub with IO-Link interface for 16 freely configurable digital inputs/outputs |
MTBF | 134 a |
LED PWR | LED green: flashing with short break (1 Hz) - IO-Link mode | |
LED IO | Switch state (IO); multicolor LED yellow: only IO pin 4 is active blue: only IO pin 2 is active green: both IO pin 4 and pin 2 are active red: overload at sensor supply or output |
Operating voltage | UB | 18 ... 30 V DC, PELV Current limitation of the supply max. 4 A |
No-load supply current | I0 | ≤ 25 mA |
Operating current | IB | max. 4 A |
Interface type | IO-Link | |
IO-Link revision | 1.1 | |
Device profile | Identification and Diagnosis - I&D Firmware update | |
Process data | Inputs 3 Byte - Input signals 16 Bit - diagnosis signals 5 Bit Outputs 2 Byte - Output signals 16 Bit | |
Vendor ID | 1 (0x0001) | |
Device ID | 985858 (0x0F0B02) | |
Data transfer rate | COM3 (230.4 kbits/s) | |
Min. cycle time | 1 ms | |
SIO mode support | no | |
Compatible master port type | Class A |
Number/Type | 16 Inputs for 3-wire sensors (PNP), DC (IO1 ... IO16) | |
Supply | from IO-Link | |
Current loading capacity | 180 mA , overload and short-circuit protected | |
Input current | ≤ 5 mA (limited internally) | |
Switching point | Type 3 according to IEC 61131-2 |
Number/Type | 16 electronic outputs, PNP (IO1 … IO16), overload-proof and short-circuit-proof | |
Supply | from IO-Link | |
Voltage | ≥ (UB - 1.5 V) | |
Current | 180 mA per output |
Electromagnetic compatibility | |||||
|
Degree of protection | EN 60529:2000 | |
Input | EN 61131-2:2007 | |
Communication interface | IEC 61131-9 / IO-Link V1.1.4 | |
Emitted interference | EN 61000-6-4:2007 | |
Noise immunity | EN 61000-6-2:2005, EN 61326-1:2006 |
UL approval | Load specification DC General Use / DC Pilot Duty Degree of protection not tested by UL; tested by Pepperl+Fuchs SE |
Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) | |
Storage temperature | -25 ... 85 °C (-13 ... 185 °F) | |
Relative humidity | 85 % non-condensing | |
Climatic conditions | For indoor use only | |
Altitude | ≤ 5000 m above MSL | |
Shock and impact resistance | 30 g, 11 ms in 6 spatial directions, 3 shocks 10 g, 16 ms in 6 spatial directions, 1000 shocks | |
Vibration resistance | 0.35 mm / 5 g 5 ... 500 Hz | |
Pollution degree | 3 |
Degree of protection | IP67 / IP68 / IP69k | |||||||||||||
Connection | IO-Link: M12 round plug connector in accordance with EN 61076-2-101, LM type (4-pin, connector contacts, screw-locking, A-coded) Female connector: LF type or similar IO: M8 round plug connector in accordance with EN 61076-2-104, LF type (4-pin, bushing contacts, screw-locking, A-coded) Mating connector: LM type or similar | |||||||||||||
Material | ||||||||||||||
| ||||||||||||||
Mass | 110 g | |||||||||||||
Tightening torque, cable gland | 0.4 Nm (M12 connector), 0.2 Nm (M8 connector) | |||||||||||||
Dimensions | ||||||||||||||
| ||||||||||||||
Mounting | screw mounting |
Related News and Applications
Read more on news and applications related to this product.