Select Your Country

Go to global website

  1. country
  2. Products
  3. Hazardous Area Products and Solutions
  4. Sensors for Hazardous Areas
  5. RFID Read/Write Devices
  6. IQH1-FP-V1-Ex GUBW1

IQH1-FP-V1-Ex GUBW1 RFID read/write device hazardous area

Key Benefits at a Glance

  • Read/Write Head for Hazardous Areas
  • Flameproof enclosure
  • ATEX-approval for zone 1 and zone 21
  • For connection to IDENTControl evaluation unit
Please contact us for exact delivery estimation.
Product photo: RFID read/write device hazardous area IQH1-FP-V1-Ex GUBW1
Dimensions: RFID read/write device hazardous area IQH1-FP-V1-Ex GUBW1
Product photo: RFID read/write device hazardous area IQH1-FP-V1-Ex GUBW1
Dimensions: RFID read/write device hazardous area IQH1-FP-V1-Ex GUBW1
Approval
Product Compliance: Europe – CE
Note

All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

EN
  • DE
  • EN
DatasheetClassificationInformative LiteratureProduct DocumentationApprovalsRelated Products

Technical data of IQH1-FP-V1-Ex GUBW1

HF RFID read/write device for hazardous areas, ISO 15693, for IDENTControl
Operating frequency13.56 MHz
Transfer rate26 kBit/s
LED green/yellowgreen: power on
green flashing: read/write attempt performed
yellow: data carrier detected
Power consumptionP0≤ 1.3 W
Supplyfrom the IDENTControl
Radio equipment
Directive 2014/53/EUEN 301489-1
EN 301489-3
EN 300330
EN 62368-1
EN 50364
RoHS
Directive 2011/65/EU (RoHS)IEC/EN 63000
Degree of protectionEN 60529
RFIDISO/IEC 15693-2
ISO/IEC 15693-3
ISO/IEC 18000-3
IECEx approvalIECEx INE 14.0042X
ATEX approvalINERIS 14 ATEX 0035X
Device type: GUBW1.D.CP-IQH1-FP-V1
Device number: 70117532
MarkingEx-Hexagon II 2 GD
Ex db IIC T6 Gb
Ex tb IIIC T85°C Db
Ambient temperature-25 ... 55 °C (-13 ... 131 °F)
Storage temperature-40 ... 85 °C (-40 ... 185 °F)
Degree of protectionIP66
ConnectionTerminal block with screw connection
Max. clamping range 0.13 mm² ... 2.5 mm² M20 barrier gland for unarmored cables, clamping range 3 mm ... 8.5 mm
Material
HousingSeawater-resistant aluminum
Installation
Distance between two headsMultiplex on: ≥ 155 mm
Multiplex off: ≥ 350 mm
Massapprox. 6900 g
Dimensions
Height134 mm
Width202 mm
Length279 mm
General Notes
Ask an expert

Related News and Applications

Read more on news and applications related to this product.

Icon Ex d
Products and Solutions
22/09/2023

Industrial Sensors with Ex d Protection—Pepperl+Fuchs Combines Expertise in New Product Line

By installing standard sensors in special Ex d housings, the components can also be used easily and safely within ATEX/IECEx Zones 1/21 or 2/22.
More information

We value your privacy!

We and our partners are using technologies like cookies and process personal data like the IP-address or browser information in order to personalize the advertising that you see. This helps us to show you more relevant ads and improves your internet experience. We also use it in order to measure results or align our website content. Because we value your privacy, we are herewith asking for your permission to use these technologies. You can always change/withdraw your consent later by clicking on the settings button on the left lower corner of the page.

Deny all cookies